johnparts
Slammed 1
Haven't ordered it yet but I'm pretty sure the kit is $199
I did the cut and weld 6 inches at a time to hold it all together so I didn't have to worry about the roof pulling away from the inner structure to badly.Are you putting in a filler piece of metal or just welding the seam shut once the gutter is shaved away? It looks like you are just shaving a short section at a time to help hold it all together until you can get it at least tacked? L8r
Jim
The stance is the result of having it at ride height 10 times and me and my buddy going "Nope too high lets try an inch lower" it got to the point that we just laid the Frame on the axle housing and lifted it up 3". Good news for me was the axle hit the frame before the tires hit the wheel well I was thinking that we were going to have to do a full tub job to get the ride height I felt looked the best. Our goal was to have the roof line at my elbow so I could lean on the roof during car shows and such.Your build is sick!!
The stance is bad azz and the late model hemi is the coup de grace. YOu are doing some fine work, keep it up! L8r
Jim
Our goal was to have the roof line at my elbow so I could lean on the roof during car shows and such.
That's why we were thinking of chopping the roof 3 more inches to make it as low as humanly possible without airbagsInteresting way to determine ride height. Makes sense and adds some COOL factor.
i'll tell you one thing it was something I didn't feel so crazy about until it was finished now I couldn't imagine the car with drip rails on it.Great build! I'm intrigued by the shaving of the drip rails -- Its been a thought of mine on my Demon, but I am not sold on doing so yet.
Oh Ken you should gut that charger and put it in the duster
Now that last pic in that group says why I needed to address the paint as you can see it was actually flaking off. I ignored that and since I didn't have the budget for a motor yet I decided to get crazy on the green interior. Black was a much better choice and with some fabric from Joanne's and a couple cans of Vinyl die we got everything Black.
Well it was a quick job just to get it cleaned up for the short term so I wouldn't recommend doing it unless it's temporary. I had die everywhere and it kept rubbing through in spots.So any step by steps on that interior work? I want to go from golden yellow to black and grey......