What's the rpm limit with hv pump

[MOPARMAGA]

I have a milodon single line external pick up and hv pump and the 9 quart super stock pan .
Milodon says that set up is good for 7k rpm.
Is that a fact or is that a sales strategy to scare me into buying the next step up ?
I'd hate to find out the hard way and I don't think my engine will see 7k and if it does it will be towards the end of the 1/4 mile.
Anyone have any experience with this?

 

[MOPARMAGA]

@toolmanmike I posted this in the wrong section sir, racers forum if you could

 

[GTX JOHN]

I have run 7500 thru the lights with a single line given
everything else is top shelf in the engine with a stock stroke
440 or 383.

 

[HSDemon]

I have run 340's with stock oil pans, oil pump and pickup to 6,500 RPM's with no issues, so I would say that Milodon is quite conservative in stating 7,000 RPM with a 9 quart oil pan, an external pickup, and HV pump. Remember that Chrysler built the 340 as a 6,000 RPM engine as it came from the factory.

 

[MOPARMAGA]

@toolmanmike you're the best.

 

[MOPARMAGA]

I have run 340's with stock oil pans, oil pump and pickup to 6,500 RPM's with no issues, so I would say that Milodon is quite conservative in stating 7,000 RPM with a 9 quart oil pan, an external pickup, and HV pump. Remember that Chrysler built the 340 as a 6,000 RPM engine as it came from the factory.

Yeah that's true. Thanks

 

[MOPARMAGA]

I have run 7500 thru the lights with a single line given
everything else is top shelf in the engine with a stock stroke
440 or 383.

Thanks John, my stuff is pretty decent internals also, I'm running a 3.915 stroke though

 

[perfacar]

we run std oil pumps with 5 qts of oil, 7500 in traps, have no issues, on a 340.

 

[RustyRatRod]

@IQ52 might can give some insight, too.

 

[MOPARMAGA]

we run std oil pumps with 5 qts of oil, 7500 in traps, have no issues, on a 340.

Wow

 

[MOPARMAGA]

@IQ52 might can give some insight, too.

That would be great

 

[GTX JOHN]

we run std oil pumps with 5 qts of oil, 7500 in traps, have no issues, on a 340.

So do I with a stock pan in my 340 stockers = But we do a lot of internal
baffling.

 

[GTX JOHN]

Thanks John, my stuff is pretty decent internals also, I'm running a 3.915 stroke though

That should be fine. I shift the stroker big blocks around 6500 but they see 7000+
thru the lights

 

[IQ52]

There's an upper rpm limit?

 

[MOPARMAGA]

There's an upper rpm limit?

The question was asked because milodon says that system I have is good to 7000.

 

[oldkimmer]

I have ran the single line to 7500. My 470 was internal and ran it up to 8000 with nos. Kim

 

[MOPARMAGA]

I have ran the single line to 7500. My 470 was internal and ran it up to 8000 with nos. Kim

Wow, okay that's good to know. Thanks Kim