Which B/RB carb bracket to use

-
S

shootr2506

Well-Known Member
Joined
Oct 31, 2005
Messages
130
Reaction score
45
Hello I’m not sure which one piece carb bracket to use on my 440 with the trick flow intake and a Mopar performance drop air cleaner .Question is Will the bracket have enough clearance with the air cleaner brace .thank you
 
Sorry, what is this 1 piece carb bracket?
Throttle arm or under the carb?
Is it a Holley carb?
 
rumblefish360 said:
Is it on the throttle arm?
Click to expand...
Thank you for answering back yesterday I was at the car and it cleared the air cleaner my new problem is I have a six cylinder throttle cable that is stock and there is not enough throw with the bracket that I am using which is aftermarket so is there a certain type of bracket for the carburetor that I need to use thank you
 
The cable is to short, correct?

A proper 4bbl. bracket for the engine series will alter the mounting point position.
If you can fabricate and weld… moving the clamp point forward on the bracket…. Then A V8 cable is what maybe needed or what I like better (also since I’m not a resto guy) is a Lokar (or equal) cable. They also have there own brackets to use.

We need a big block guy here.
 
I used Lokar cable myself. But a picture of what exactly your working with and the issue at hand would be a great help.
 
Big block in a A body that had a /6.
Easy enough and the been there done that guys would know what throttle bracket to use.

I myself had a 400 B in a ‘71 /6 Duster and I used a Lokar cable set up for the throttle and trans kick down. If there is a factory bracket to use with a /6 cable, I am unaware of it.
 
Ok….here is what I used with lokar cables

2A5B449B-37A2-4C4C-8F09-0FA4BDB18C1B.jpeg
 
rumblefish360 said:
The cable is to short, correct?

A proper 4bbl. bracket for the engine series will alter the mounting point position.
If you can fabricate and weld… moving the clamp point forward on the bracket…. Then A V8 cable is what maybe needed or what I like better (also since I’m not a resto guy) is a Lokar (or equal) cable. They also have there own brackets to use.

We need a big block guy here.
Click to expand...
Thank you so much I ordered a cable mount and return spring from bob mazz in California it’s a stock looking mount but ,ale tall for high rise intakes like I have .hope it works thanks buddy
 
You must log in or register to reply here.
-

Back
Top