Slantsix64
Well-Known Member
Would it be later vans and trucks?
Which mopars had 15x7 steelies with 4 inch B/S 5 on 4.5
- Thread starter Slantsix64
- Start date
-
Slantsix64
Well-Known Member
15x7 big bolt pattern
The mopar police wheels are 15x7 and BBP, but they had a 4.25" backspace.
If you're planning on using these on the front of an A-body with BBP disk brakes, the 4.25" backspace would be MUCH better to have than a 4" backspace.
Slantsix64
Well-Known Member
I’m looking for two spares for the rear to put my slicks on when it’s time to party… lol with a 255 60 15
Slantsix64
Well-Known Member
Or 27x10.5
1981 truck, BUT 4 1/4 back spacing.
Pretty sure the 4.25" backspace was standard for the Mopar BBP 15x7's, but I could be wrong on that. Some of the reproduction stuff is 4"
As far as I remember all 15x7'' Mopar steel wheels were 4.25''
Not sure of the C body 15x6'' wheels. They could be 4''. May not be wide enough for your application.
Slantsix64
Well-Known Member
Thanks guys guess I’ll be hitting the junk yard
junkyardhero
Well-Known Member
anaheim had some prospective stuff last i was there. monrovia just dropped a 77 B100, it didn't have all 4 but if you only need 2 that's the jam. hell, the tires even looked good!
lemondana
BlackDart
The mid to late 80's Diplomats-15X6 or 15X7. Usually the same year Chrysler Fifth Avenues had the 15X7. They used the full fake wire wheel covers that had very aggressive mounting teeth on the back. Usually the wheels are scarred up pretty good. watch your U Pull Its, have a small tape measure with you.
-
