which plug wires should i use?

-
Barracuda_v8

Barracuda_v8

Well-Known Member
Joined
Feb 20, 2011
Messages
102
Reaction score
1
Location
Angelholm
Hello guys!
Which plug wires are you using on your engines? The engine is a 408 with msd ignition.

thanks
Daniel
 
8 mm should be fine Accel, Taylor, etc.
I buy the universal kit and make them myself because I have headers and need to route them so they don't get to close to the headers. I can cut them to perfect length another words. I bought a GOOD pair of wire crimps to help make life easier on fabing up the wires. I have used the cheap crimps before and it does not compare to good crimps.

http://www.summitracing.com/parts/TAY-43390/

These are nice to have also. They don't let the wire pop out.
http://www.summitracing.com/parts/SPE-4631/
 
I will give another Vote for the Taylor Wires.

Have a set on my 74 Power Wagon and 2nt one my 70 Barracuda.

Both are over 15 year old, and the Cuda has lived through 4 Engine changes!!!!

I'm sure there are other out there, just as good.

It was the last set i needed to buy:thumrigh:
 
Im running the msd 9mm they sure are pretty you can bend the ends to get around headers not a bad price from summit.
 
You must log in or register to reply here.
-

Back
Top