Why...

[kc0r8y]

...Is the Painless Kit so much more expensive then the EZ Wire kit.

I don't see much of a difference between them.

Please educate me:

https://www.amazon.com/dp/B00NO0Y1AS/?tag=joeychgo-20

https://www.amazon.com/dp/B000VTUAK0/?tag=joeychgo-20

 

[bbrroowwnn]

I don't know...I used a EZ wire in my street rod project and worked great.....never used a painless so I cant compare

 

[roccodart440]

I used a painless kit.

Use all of their kit and parts or it isn't painless.....

 

[dukeboy440]

...Is the Painless Kit so much more expensive then the EZ Wire kit.

I don't see much of a difference between them.

Please educate me:

https://www.amazon.com/dp/B00NO0Y1AS/?tag=joeychgo-20

https://www.amazon.com/dp/B000VTUAK0/?tag=joeychgo-20

Name brand

 

[383Scampman]

Don't know . Why is a Mopar crate engine more than a chevy or fford ? Because it's a Mopar !

 

[roccodart440]

Have you looked at Ron Francis?

 

[Inertia]

EvansWiring.com : Product Catalog

 

[Pawned]

How much time do you have? I rewired mine myself. I bought about 1600 feet of #16 wire in multiple colors, got a good schmatic (with only a couple errors) and rewired it myself. I was also able to add my own modifications as I went.
I did mine because I was in no rush and did not want a premanufactured harness.

Plus I saved a boatload of money doing it mayself

 

[BillGrissom]

Ditto. I custom-wired the under-hood of 2 of my 3 1960's Mopars. I used a relay/fuse box from a Jeep. Since most wires from the cabin now simply turn on relays, I used mostly 20 awg colored ribbon cable from bulkhead to relay box. Keeps the bulkhead clean, and no clutter on the firewall (no horn or starter relay, no ballast resistor). I will do my C-body next since the factory under-hood wires are also brittle. In contrast, the under-dash wires were fine in all and just needed repairs to the gomer fixes.