Windage Tray Design

-

tandart66

Active Member
Joined
Nov 13, 2023
Messages
32
Reaction score
18
Location
San Francisco, CA
Hey all,

Does anyone have a “blueprint” or dimensions for a slant 6 windage tray? I want to custom fab one for my pan.
 
I got one somewhere. Lemmie see if I can find it. Gimmie a day or so.
 
Have You been on .org? There are members who were making/offering them, & there may be a pattern available as well, can't hurt to check. Scrapers as well...
 
Could i have a picture of it?
Here you go: have already fitted to my slant on the stand

IMG_6997.jpeg


IMG_6998.jpeg
 
I thought Dutra did that on one of his...

Have You been on .org? There are members who were making/offering them, & there may be a pattern available as well, can't hurt to check. Scrapers as well...
I updated and improved the Mike Jeffries scraper for the .org guys when they started to offer the windage trays. I made quite a few of them at that time for them. Forged crank version....
 
There's an episode of Uncle Tony's Garage where he mods a Jegs 340 tray for the slant. Seemed easy enough.
 
or you could make or purchase something like this


this one fits a hemi 6 but you have main caps in a different place in a slant 6 so some new holes and some ARP washers under the bolt head onto the bracket might have this working.

not as effective as a full scraper set-up but combined with a baffled sump might give some satisfaction.

they do tend to cause oil to blow out the dip stick tube, as i have found....
strong indication that they are disrupting the windage but i have no idea if that disruption is a positive thing

i'm happy..my engine works ok 13.8 1/4 mile on street tyres

Dave
 
-
Back
Top