1969dodgedart
Big Block 440
Recently bought some oe replacement wiper blades for my 1969 Dart and I am on the hunt for picture of how they attach to the factory arms? Thx in advance.
Wiper blade fitment 1969 Dart
- Thread starter 1969dodgedart
- Start date
-
If full Blades, then very simple.
There is a release on the bottom to remove from the arm.
There is a release on the bottom to remove from the arm.
1969dodgedart
Big Block 440
Thx , this is my original arm and these are the blades I ordered from Classic Industries.
1969dodgedart
Big Block 440
Seems like there should have a brkt between the two to attach.
Better pic in post #3 second photo is in order.
Seems like you were sent the wrong part!
Seems like you were sent the wrong part!
1969dodgedart
Big Block 440
That's what I've been thinking, in the catalog thats the wiper it listed for my car but apparently not. Thx for the pics.
Some More.
You have to release the Wiper blade assembly by pulling the tab away from the arm.
You have to release the Wiper blade assembly by pulling the tab away from the arm.
1969dodgedart
Big Block 440
Ya I definitely have the wrong blades , I'm going to email OER and see what they can do for me via an adapter. Thx
O’Reillys has the Trico replacement blades for the slide in style blade. Here’s a pic of the 13”, I believe yours would be the 15”
Bad deal is, some of our blade assembles were so old that just a refill was not going to work!
https://shop.advanceautoparts.com/p...nyZz286KrD9M2o-ar9RoCnh4QAvD_BwE&gclsrc=aw.ds
May be bad as well but worth a look for the price.
Are you looking for oe replacement?
Wouldn't the have been the red dot type
This is the style used in 67, 68 up different?K164 - Windshield Wiper Blades; 15
Wouldn't the have been the red dot type
This is the style used in 67, 68 up different?K164 - Windshield Wiper Blades; 15
Beg to differ, OEM at least in 67.
Iirc there are 2 different types look very much the same but the air foil is shorter on one.
Can't you just replace the blade?
15" rubber insert, (wiper refills), slides in from one end and locks w tabs.
Arm should look like this on 69 Dart.
View attachment 1715773278
15" rubber insert, (wiper refills), slides in from one end and locks w tabs.
View attachment 1715773278
From the sales book with my dad's writing from 1967 when he was shopping for his/my dart convertible
Some photos
Last edited:
1969dodgedart
Big Block 440
Thx fellas for all the info , I will chase down a solution.
1969dodgedart
Big Block 440
All that came with my car were just the arms in a box in the trunk no blades .
I see.
Dana67Dart is on point.
That's what you need.
Dana67Dart is on point.
That's what you need.
That's all good, and awesome work!
It does not change the fact that "I" have never seen those on and any pre-70 Mopar.
-
