WTB Complete 68 Barracuda Dash

-
Status
Not open for further replies.
V

Valiant422

Banned
Joined
Jun 23, 2005
Messages
362
Reaction score
1
Location
Indianoplace
Rating - 0%
0   0   0
Contact seller
Since my windshield is fogging, and I am going to replace it over winter, and I am tired of my square dash.

So I'd like to buy a frame and cluster atleast, but a complete dash would be best!

Let me know what you have, with pics, and keep in mind shipping would be to 46082.

Thank you.

0109155_6z+1968_Plymouth_Barracuda+Interior_View_Dashboard.jpg
 
I have a complete 68 cuda dash with a.m radio and upper and lower pads. complete with wiring harness. It will probaly be costly in shipping. I live in P.A. 17025
I will try to post pix tommorrow. I will have to think about the price.
T.J.

DSC01873.jpg
 
the wiring for the dash is different as well, you can convert your wiring but you will need the special plug. Ma mopar liked to reuse things and you can find the plug on '72+ harnesses or I have a few that I am willing to sell.
 
Remember to change the oil pressure sender to the gauge type also.....

Thanks, Mark
 
here are more pix, the wiring has no cut lines in it and radio plays good for a.m.. P.M. me for a price later.

DSC02069.jpg


DSC02058.jpg


DSC02059.jpg


DSC02060.jpg


DSC02061.jpg


DSC02062.jpg


DSC02063.jpg


DSC02067.jpg
 
I have a frame that I took out of a 68 Barracuda. It's straight and isn't hacked up or rotted out. It doesn't have the wiring or gauge cluster though, just the frame.

Ken
Edsion, NJ

DSCN1167.jpg


DSCN1168.jpg
 
why change your whole dash. just remove your delete plates and add heater controls i have a the controls and the cables.
or i have a frame, harness, controls, etc...
i have a bezel not that good.
203 376 3739 cell or pm me
.all 68 stuff.
 
Status
Not open for further replies.
-

Back
Top