mrnurse
Well-Known Member
- Joined
- May 17, 2009
- Messages
- 209
- Reaction score
- 0
this is parts compatability focused........
ok gonna start on my rebuild while the car is going off for paint and want to know if this will be a good combiniation.
318 block bored 30 over
stock rods with arp fastners
kb167 30 over
318 heads port matched, very mild porting, stock sized valves/rocker arms
not sure of which cam???(ideas welcome)
edelbrock torker 340 intake
windage tray
stock oil pan/pump/pickup tube
proven performance fuel injection system(looks like a holley carb)
72-72 340 hipo exhaust manifolds
any other ideas?
engine is going into a 70 two door swinger 904 auto
ok gonna start on my rebuild while the car is going off for paint and want to know if this will be a good combiniation.
318 block bored 30 over
stock rods with arp fastners
kb167 30 over
318 heads port matched, very mild porting, stock sized valves/rocker arms
not sure of which cam???(ideas welcome)
edelbrock torker 340 intake
windage tray
stock oil pan/pump/pickup tube
proven performance fuel injection system(looks like a holley carb)
72-72 340 hipo exhaust manifolds
any other ideas?
engine is going into a 70 two door swinger 904 auto