Search results for query: *

1967 Dodge Dart Fuel tank, its about 3 years old no rust in tank. Like new. Has small dent that was there when it arrived from shipping. No problems with it. Black marks are adhesive from anti squeak mat on it. Includes 3/8 tank pick up also about 3 years old. Has OEM lock ring. Went to a fuel...

Tti small block Mopar shorty headers part #TT134025. These have been thermal coated. With a ceramic finish 1 5/8 tube to 2.5 inch collector. Down pipes are part #T340440AS-C4 and were thermal coated at an extra cost as well. One has been “massaged” as shown. These headers are off a 1967...

Good used Proform electronic distributor, Jegs blue ignition box, a good used coil. and a good used set of plug wires. Included are some extra spare plug wires and some other spare parts. Worked when pulled recently. $90 Parts are in 94928, I’ll ship on your dime.

Edelbrock air gap part 7576. Fits small block Mopar La. Comes with eEdelbrock intake bolts $380 Pick up in 94928, or will ship on buyer dime.

The bell housing has a bearing retainer diameter of 4.80. Just the bell housing and the clutch fork pivot. I can’t find a part number the bell housing. $300obo plus the ride. Located in 94928.

March single grove water pump pulley, crank pulley and alternator bracket. Crank pulley #10009 Water pump pulley #10212 Also included is the alternator bracket and misc hardware as shown. $225 shipped and insured usps to the lower 48

Selling my 4 speed set up from my 67 dart. Removed from running/driving car a few weeks ago. I purchased this rebuilt transmission from brewers in 2016. (I have documentation) There is about 3800 miles on it since installation. Works great. Has a 3.09 first gear. Cast iron bell housing...

First off-I cannot read the Vin stamped on the block. Pictures included, could not see the vin on the pan rail. 340 engine for sale. Runs good, compression 125-140. Oil pressure 70 cold, 25 hot. I can send a video of it running if your serious. If you are local, you can see it running. I will...

Mopar 340 exhaust manifold set. Drivers side- 3614368 Passenger side- 3418623 No visible cracks. Heat riser on passenger side has been removed, tapped and a cast iron pipe plug has been inserted. Orange RTV added as well. comes with TTI head pipes. Was on a 4 speed car and the drivers side...

W2 heads 3870810 castings One head has had a repair as shown in pictures. Didn’t hurt performance. Head that was repaired was pressure tested by a machine shop and came back good. Have paperwork. Has dual valve springs 3 15/16 bolt pattern Removed from running car on 4/9/21 includes an old...

TTi A body headers Part number TTi-340AW2-C4 They are ceramic coated with a thermal barrier. Bolt spacing is 3 15/16 1 5/8 c 1 3/4 tubes has scratches and a few dents to clearance large torsion bars. $550 located in Santa Rosa Ca 95403. I can meet with in a few hours of 95403.

W2 heads 3870810 castings One head has had a repair as shown in pictures. Didn’t hurt performance. Has dual valve springs, bushed Roller Rockers. In ok shape they do show some wear. Removed from running car on 4/9/21 Package Includes TTI ceramic coated headers with thermal coating for A body...

Hurst 7036 shifter handle.its the push in style. It includes the clips for installation. $175 shipped from Petaluma CA

LA small block solid roller cam custom made by Lunati. Lift .636/.636 Duration 272/272 @ .050 LSA 104 Lash .025/.027 It is used, Removed 5/10/19 for a more street friendly cam. Includes the bronze distributor gear. Pictures show condition. $260 shipped for cam and gear.

LA small block solid roller cam custom made by Lunati. Lift .636/.636 Duration 272/272 @ .050 LSA 104 Lash .025/.027 It is used, Removed 5/10/19 for a more street friendly cam. Includes the bronze distributor gear. Pictures show condition. $325 shipped for cam and gear.

4.30 gear set for a 8 3/4 rear 742 case. In good shape. White coating is grease. $100 shipped.

1968 Dodge Dart gas tank with a sump welded in. It's in great shape I pulled it to go back to stock, see pictures. No leaks, nice welds. Tank only, sending unit not included No looking to ship it so I can meet in either in either 94928 or 94066 (SF Bay Area) $50 obo

I have a small block ignitor 1 and coil. It worked great when pulled a few months back. (I upgraded) You get the ignition, distributor with ignitor, coil and cap. As seen in the photos. $90 shipped to the lower 48. PayPal preferred. Thanks Rob