Recent content by Bulldog

On my 68 cuda dash tha paint was cracking and peeling so I sanded it up and sprayed the black and the chrome parts back up. Was that a good idea or should I of had it done by a knowledgable person thanks. The dash in my mind came out very nice so yea, if you want a pic let me know thanks again

thanks abunch cuda that helped alot and dgc333 i will check into the por15 stuff also.

so I've never painted a engine block before so I have a few questions, >I sanded the block down and most of the paint came off but not all, should I prime the whole block anyway just to be on the safe side? >I think the fuel pump on my 318 is aluminum, paint doesnt stick to aluminum does it...

well the harness I recieved with my 68 cuda is shot, I was wondering if you guys knew where a nice but not expensive harness is located so I could purchase it thanks

I have my engine on its stand, now im going to start to wash it. First I'm going to pressure wash it to get the big chunks of sludge off, what will work best to get the oily residue off? Brake cleaner, gunk engine cleaner, or any degreaser? >or will sand blasting work best after I pressure...

thanks for the reply mike this will really help in the near future.

I have a 340 with a cracked water jacket, so my dad pick up a 318 for cheap. I have a question though, the guy said we can swap the heads and the intake directly from the 340 to the 318 is this possible, because the engine is my next task thanks.

why does it have to be $1.00

but they are so nice how can we stop hahaha?

here they are bigger The suspension is done but we just threw some old rotors on to hold up the tires we're getting new brakes gallore plus all the rotors and junk later when i have the car running so yea just a heads up.

yay I have pictures lets see if I can get this to work hmmm. and

thanks for the help i was just wondering for future reference, im wondering if hookers will also fit the cuda front end, because they are near my 16 year old price range. thanks Another question: if hookers are a bad idea should i stick with my stock header/manifolds? ive also been doing some...

Im new to this and couldnt find any info while i searched, anywho my question is will these fit on my 68 cuda http://www.ttiexhaust.com/Header-Small%20Block/340ABE.htm thanks im assuming they fit on 318 340's. My other question is if they do fit does the torsion bar go through the header or...

thank you i wasnt sure if both the horns were needed. that clears alot up also on the firewall.

Like I said before i received my 68 Cuda, but with the front end gutted so my question is does anyone have pictures or diagrams of where all the parts go in the engine bay like the horn, blower, hoses, wiper containers. I have looked on the internet and have found a couple pics but not of...