Recent content by Primer King

  1. P

    Another 904 question

    Hi guys. Pushbutton 904 in my 64 Dart has a problem, don't know what it is but it clunks and makes bad noises trying to go into gear. I found another /6 pushbutton 904 combo in a cheap+local 63 Fury. Fury was a heavily rotted but driveable 4door that got parted out. So the Fury trans has an...
  2. P

    Tunnel Ram on a 383

    I'm very interested in this thread. I have a 383 out of a 66 Charger that was rebuilt with 906 heads and an Isky cam and valvetrain and an Edelbrock single 4 intake. Guy I bought it from said cam is an RV type grind and ran good on the street, but he forgot long ago what the cam specs were. It...
  3. P

    Pushbutton trans parts interchangability?

    Thanx for the info guys. I also have access to a 904 from a 65 Valiant. Not a pushbutton I know, but maybe better going that route with the pump and filter difference that kickdown mentioned. The stock rear in my Dart munched the carrier spider gears. I knew there was an issue, it had been...
  4. P

    Pushbutton trans parts interchangability?

    Hello. I found a 904 from a slant six 1968 Dart for sale locally. It's cheap enough so I'll probably get it. I have a 1964 Dart and I know that the pushbutton case and atleast the valvebody is different in later column/floor shift 904s. There may also be output shaft differences since 1964 was...
  5. P

    [WANTED] 63-66 a-body front framerails

    Does anybody have front framerails with the shock towers still attached? Found rot in mine between the base of the tower and the framerails around the upper control arm mounts. I need them so they cost what they cost; but it'd be nice to get a pair for under $300 or so shipped to CT. Thanx!
  6. P

    Instrument voltage regulator

    I just found this using the keyword search that you requested; thank you!
  7. P

    Gas and temp gauges in a '64 Dart

    Thanks very much for the replies. I will look into all of the suggestions, the advice is appreciated!
  8. P

    Gas and temp gauges in a '64 Dart

    Hi, thanx for reading. A while back my ignition tumbler failed. I knew it was going but waited too long and one day a spring or pin or ??? failed and the key wouldn't go in. Happened at work so I unplugged the tumbler and bent paper clips to get it jumpstarted and running. Ran around with that...
  9. P

    7.25 parts?

    Thank you sgbarracuda Roy. I will post again when I know more.
  10. P

    7.25 parts?

    My 64 Dart has a lot of slop and a clunk in the housing. With one tire off the ground, there is over 1/4 turn slop (in one tire with one still on ground) and a "clunk clunk" noise in the housing when I rotate the one tire; it's like a sloppy steering box with lots of play in the wheel and a...
  11. P

    New guy, 1964 Dart in CT

    Hello out there. I have a few other Mopars, but in July 2014 I bought a 1964 Dart 4door. Great car, it had a little over 51,000 miles when I got it. Pretty sure it wasn't rolled over and 151,00 because of indicators like the pedal rubbers were not worn out even a little. A previous owner...
Back
Top