Search results for query: *

  1. victa15

    Radiators in an A-body?

    Do you have a part number? Also how is it doing cooling it? I have a mild built 318 with headers and I live in tucson az. I want to find something that will keep it under 210 in the summer in stop and go traffic
  2. victa15

    68 valiant hood hinge upper pin loose

    I will when I get back home. The pin is still there. It just wobbles around because the welds are gone. Im not a welder
  3. victa15

    68 valiant hood hinge upper pin loose

    Hi. I have a question on how to go about re welding or replacing the passengers upper hood hinge pin. The welds came off and I can't get it from the back. Looks like a hard place to try to reweld it. Was thinking about taking the pin out and trying to get a collared bolt in there. Anyone come...
  4. victa15

    Help! Swapped 302 heads on my 318.

    I measured and they both were the same size.
  5. victa15

    Help! Swapped 302 heads on my 318.

    Hey so i pulled the valve covers and used a snapon jumper switch i have to crank the motor. I saw that he intake valve on cylinders 1 and 4 werent really moving. SlI pulled the rocker shafts off and found that those two pushrods had some scraping on them. I put in the ball type pushrods and...
  6. victa15

    Help! Swapped 302 heads on my 318.

    But if they were milled the intake wouldnt fit
  7. victa15

    Help! Swapped 302 heads on my 318.

    Yeah i agree. But the intake fit perfectly. And the machine shop said everything was good on the heads
  8. victa15

    Help! Swapped 302 heads on my 318.

    Its ok. Any advice would be useful thanks
  9. victa15

    Help! Swapped 302 heads on my 318.

    He heads were sitting for a few years. But i just got them rebuilt about a week before i swapped them
  10. victa15

    Help! Swapped 302 heads on my 318.

    Heads have been sitting for a few years in my shed. The machine shop cleaned them and did a valve job with new stem seals
  11. victa15

    Help! Swapped 302 heads on my 318.

    The valves, springs and guides were all from the 302 heads. Only thing i took off the other heads was the rocker arms and shafts
  12. victa15

    Help! Swapped 302 heads on my 318.

    What do you mean height change? Sorry im still learning. I got the 302 casting heads from a junk yard years ago. Just had them rebuilt at a machine shop that i e been using for years. When i called they said they checked the springs and the were good. But. Im going to check for coil binding on...
  13. victa15

    Help! Swapped 302 heads on my 318.

    Sorry. Im tired. I have a hydraulic cam with hydraulic lifters. My slant six was solid cam. There were no shims under the rocker shafts
  14. victa15

    Help! Swapped 302 heads on my 318.

    I know. I want to call in from work today and start checking things out. I work nights amd my next day off is friday. But im going to start checking one thing at a time
  15. victa15

    Help! Swapped 302 heads on my 318.

    The pistons arnt bump top or any thing and have valve reliefs in them
  16. victa15

    Help! Swapped 302 heads on my 318.

    I checked the compression on the 1st cylinder. And my gauge didnt move. Im it was getting late so i didnt check the others. When i hand crank it. You can hear the air from the compression. Im going to check the valve hights. The heads were completely redone at the machine shop. So if i had a bad...
  17. victa15

    Help! Swapped 302 heads on my 318.

    I did. I also got it back to top dead center and checked the timing. Everything is good there.
  18. victa15

    Help! Swapped 302 heads on my 318.

    So i dont know the cam specs. It was in the motor when i got it years ago. I know its a mild cane cam. When i put the pushrods in i had the intake off and made sure they were seated in the lifters. They were the same ones that were already in it. The cam looked really good still. When i hand...
  19. victa15

    Help! Swapped 302 heads on my 318.

    So how do i measure them with the springs on? Do i just measure the spring hight the old heads and see if they are the same as the 302s? I dont have any adjustments on the rockers. What would i do then if they are taller?
  20. victa15

    Help! Swapped 302 heads on my 318.

    Ok. Why would they be different? With the springs on? Would the rockers be wrong?
  21. victa15

    Help! Swapped 302 heads on my 318.

    So i have a 72 318 in my 68 valiant. Its .030 over with a mild cam that i got from a guy about 8 years ago. Ran good but i wanted to give it a little more hp. So i had a set of 302 casting heads that i had redone at a local machine shop. Stock everything. I put them on with a ld4b intake and...
  22. victa15

    [Found!] Abody 318 manifold exhaust

    Just got some from another member thanks
  23. victa15

    [Found!] Abody 318 manifold exhaust

    I was going to start looking tomorrow. Thanks
  24. victa15

    [Found!] Abody 318 manifold exhaust

    Yeah. I want to put dual exhaust using the stock manifolds. So im either looking for the y pipe or separate pipes coming down. I dont have 100s for an exhaust right now
  25. victa15

    [Found!] Abody 318 manifold exhaust

    Im looking for a pair of 318 manifold exhaust turn down pipes. I think thats what they are called. I just need the section that connects to each manifold and goes under the car. I have a 68 valiant with manual steering. Thanks
  26. victa15

    Rock Auto magnets

    I guess i just have a few... lol
  27. victa15

    [SOLD] 67 barracuda bucket seats

    I have a nice set of bucket seats that came out of a 67 barracuda. Got them out of a junk yard here in tucson Az. Had them in my storage shed for 5 years now. Not going todo anything with them anytime soon. Looking to get 300obo. Local pickup only. Sorry cant ship them.
Back
Top