Search results for query: *

  1. dustya_383

    No crank from key

    Thanks guys .. Plugged in a spare column I had and fired right up . So swapped the ignition switch and it's all go now
  2. dustya_383

    No crank from key

    Hey guys having a cranking issue with my duster .. Car will not crank from the key I have jump from relay... Car is a 4 speed and I grounded the NSS and still no go from the inside .. What would be the next thing to check ?? It's msd dizzy 6al box in a 74 duster .. 360 thanks
  3. dustya_383

    Starter issue

    Only thing that has changed is headers and starter clears headers I'm thinking its not kicking out far enough may just buy another and double check .. What year had the smallest starter?? Engine and trans were separated . But everything else is exactly the same as before
  4. dustya_383

    Starter issue

    Sorry small block 410 . Starter is for a v8 . It worked fine before I thought maybe I installed it at worng so I pulled it out and put it back in and same problem.
  5. dustya_383

    Starter issue

    ??? Anybody have an idea on what the problem is?
  6. dustya_383

    Starter issue

    This isn't really an electrical problem more of a starter problem .. ... I recently pulled motor out of my car . Fixed a couple of leaks and put new headers in .. I'm using a mini starter for a later model dodge truck . 91 Dakota or something.. Anyways when I go to start it. It sounds like the...
  7. dustya_383

    Headlight/brake light issue

    Headlights Hey guys so I messed around with my lights again today and got them to come on for maybe a minute then, then start flashing on and off maybe 2 seconds off then come on then off etc.. ..now I'm not sure if those are highs or lows . Anyways when I hit the highbeam switch the lights go...
  8. dustya_383

    Headlight/brake light issue

    Thanks guys I will double check the grounds I have a feeling it's the one by rad support I've missed that one before. For brake light ill check the switch to see if its working properly . Let you guys know how it turns out
  9. dustya_383

    Headlight/brake light issue

    So I have a major head light and brake light problem. I have no headlights when I turn on my switch. All I have is rear running lights . I hit the brakes and I get nothing. I go left signal and it blinks once and stays lit. And have nothing when I do right signal . I hate electical work it's...
  10. dustya_383

    Starting issue

    Hey guys .so I did what 67dart273 said and set timing markers to where I wanted which was about 18degdrees.. Rotor on dizzy was off so I adjusted it , and she fired up. So that's good but now I can't get this thing to idle to save my life it will idle for a a few seconds then start to stutter an...
  11. dustya_383

    Starting issue

    I have a timing light just have yet to get it on there. I have a feeling she's 180 out and maybe I'm on the wrong side of the compression stroke . I did the old stuff a piece of paper towel on plug whole and bump engine til it flew out trick then turn it back to zero and that would be tdc ...
  12. dustya_383

    Starting issue

    Yes I was checking it thru relay. I will double check from actually turning key. IF there is no spark what would be the culprit?
  13. dustya_383

    Starting issue

    Ok I will turn her around and see how she acts. . Gotta got to bed now hahah
  14. dustya_383

    Starting issue

    Nope , but before I pulled intake it would fire first time have yet to get timing set to what I want due to other issues vac leak and such is it possible for rotor to be pointing in right direction and still be 180 off??
  15. dustya_383

    Starting issue

    Yea I pulled off cap while at tdc rotor is pointing right at it .
  16. dustya_383

    Starting issue

    I have fuel getting to carb I have msd box 12v tied in to ballast resistor wires all spliced together .
  17. dustya_383

    Starting issue

    No oil pump drive was not removed only the dizzy and intake carb etc.
  18. dustya_383

    Starting issue

    Hey guys having a problem getting my stroker to fire up. So I had car running but took off intake re sealed it etc. put it back together and it's not firing. I triple checked my timing making sure I was at tdc compression and rotor on dizzy was pointing at cylinder 1 .I have spark , I have...
  19. dustya_383

    Won't fire

    Hey guys so I went ahead and replaced the underhood half of the harness with my other one and I still have no power to anything I'm freakin stuck. No fuses. Are blown in the fusebox what do I do??
  20. dustya_383

    Won't fire

    Damn it!!!! So I was switching all my aftermarket gauges and cluster in to the car and as I disconnected the factory alt. gauge the hot wire came in contact with the dash and smoked the fusible link literally . I have another one from my other car but it went thru bulkhead so do I need to...
  21. dustya_383

    Won't fire

    This one I believe does not have the seatbelt interlock ,what I did was take three wires that went to auto tranny and the black ones I moved to the side and the yellowish brownish ( cant remember color) one I grounded to block . Did I ground the correct wire? I get power to all my gauges and my...
  22. dustya_383

    Won't fire

    No I had that problem once and fixed it. But I get running and have to constantly give it throttle or else it dies out I tried to adjust idle screw but seems to bottom out ill mess with it see if I can get to run enough to set the timing
  23. dustya_383

    Won't fire

    Yea I'm getting spark cause its firing but won't stay on. I have to hit throttle. To get fuel in intake then crank it will go for a sec then die and have to repeat.
  24. dustya_383

    Won't fire

    Hey guys so I just swapped my 410 4speed into my other 74 duster ( came out of a 74 duster). I swapped motor trans. Rearend and steering column. Steering column is for as stick car. Everything was working in. Other car msd everything Now car won't start from ignition. Only relay and when I do...
  25. dustya_383

    Starts off starter but not key

    Starter relay maybe?? I'm no electrical Pro I absolutely hate it really lol
  26. dustya_383

    Car won't stay on

    Hey guys so I got a chance yesterday to take a look at the duster and found my problem , it wasn't the ballast resistor , I had a loose connection in wiring harness , steering column connectors are so brittle and crack but fixed problem and I'm all good now thanks for the help to all
  27. dustya_383

    Car won't stay on

    Ok I'll give all thT a try when I get off work
  28. dustya_383

    Car won't stay on

    Ok so I tried the othe column and same thing so guess it has to be the ballast right? No fuses or any other possible things ?
  29. dustya_383

    Car won't stay on

    Ok only thing is when I hold the ignition on ,the motor will run but nothing else will work no radio, no electric choke , only lights well because those are runnin off the battery and alt. I'm no good with electric but wanna go with my gut and say its the ignition switch I'll connect my old...
Back
Top