Search results for query: *

  1. Charger4404spd

    Old girl is getting some work.

    ...color that matched very well so I ordered 1.5 yards. Covering went pretty well (used contact adhesive). The compound corners on the ends were a **** :) All in all I am pleased with the results and I saved a lot of money. Removed the cluster, diassembled, cleaned and repainted gauge...
  2. Charger4404spd

    Gauge cluster lighting

    Found the problem. The orange wire wasnt making good contact on the pin. I went ahead and added the grounds anyway. Thanks for your help!
  3. Charger4404spd

    Gauge cluster lighting

    Thanks, I will add a ground tomorrow and hope that fixes it.
  4. Charger4404spd

    Gauge cluster lighting

    Yes I had the cluster out and installed all new bulbs. Couple of the bulbs on right side worked before I removed cluster. Theres a separate circuit board for each side. Maybe right side isnt getting a ground?
  5. Charger4404spd

    Gauge cluster lighting

    Any idea why the left side of the cluster is lit and the right side does not? According to the diagram, the orange wire feeds all bulbs. 67 Barracuda.
  6. Charger4404spd

    [WANTED] Bench Seat spring

    PayPal sent, thanks a bunch Ben!
  7. Charger4404spd

    [WANTED] Bench Seat spring

    Just want to clarify.... its the long spring and not the small spring on the handle.
  8. Charger4404spd

    [WANTED] Bench Seat spring

    Thanks man, PM me your paypal info and I will get the funds to you. Steve
  9. Charger4404spd

    [WANTED] Bench Seat spring

    I need one bench seat spring for the seat slide. 67 a body. Thanks, Steve
  10. Charger4404spd

    67 Barracuda dash bezel

    Will do, thanks!
  11. Charger4404spd

    67 Barracuda dash bezel

    That looks good Mike, thanks for the pic. Did you use model car paint for the chrome?
  12. Charger4404spd

    67 Barracuda dash bezel

    Wanting to somewhat restore the dash bezel that has yellowed over the years, but not sure what paint to use. Was these painted with Argent Silver? Pics would be great if anyone has restored this bezel.
  13. Charger4404spd

    Mark IV evap

    Wondering if anyone has installed the Mark IV ? Wanting to install it in my 67 Barracuda. Looks like it will be a pretty tight fit.
  14. Charger4404spd

    [FOR SALE] one 14X5 1/2 sbp wheel

    Found one earlier today, thanks for your response.
  15. Charger4404spd

    [WANTED] 14" steel wheel

    Found a wheel today, thanks fellas!
  16. Charger4404spd

    [WANTED] 14" steel wheel

    No problem, thanks John.
  17. Charger4404spd

    [WANTED] 14" steel wheel

    10-4 thanks AZ
  18. Charger4404spd

    [WANTED] 14" steel wheel

    Great, thank you. The size should be stamped on the inside lip, at least on mine they are.
  19. Charger4404spd

    [WANTED] 14" steel wheel

    Need a good steel wheel 14x5.5 small bolt pattern. Light rust is ok as long as theres no pitting. Give me price shipped to 37890, thanks!
  20. Charger4404spd

    [FOR SALE] one 14X5 1/2 sbp wheel

    You have a pic? How much shipped to 37890? Thanks
  21. Charger4404spd

    [SOLD] Dog dish caps

    Ill take the Plymouth Division set for $125
  22. Charger4404spd

    PP1 paint pics

    Understood, just need to see a car with PP1!
  23. Charger4404spd

    PP1 paint pics

    Any of you all have PP1 paint on your rides? My 67 Barracuda was painted red many years ago by someone. The interior is maroon with white seats. Seems odd to me everything is maroon with red exterior, but the fender tag does say PP1.
  24. Charger4404spd

    Bellhousing Experience Quicktime vs Lakewood

    I cant use a boot either.
  25. Charger4404spd

    Bellhousing Experience Quicktime vs Lakewood

    Ok I just got an email notification on this thread, so since I am here I will add to my last post. I ended up using the fork pivot out of the cast bellhousing to make this set up work. I also just installed a McLeod Twin Disc and I love the light pedal pressure. Havent opened up all 800 hp on...
  26. Charger4404spd

    Bellhousing Experience Quicktime vs Lakewood

    Yes its all the way in, but I think I figured it out. Look at the pics. The pivot on the factory bellhousing is lower than the one in the Lakewood housing. :banghead: I spoke to a tech at Lakewood and he couldnt tell me why the pivot mounting was in the wrong place:banghead: So now Im going...
  27. Charger4404spd

    Bellhousing Experience Quicktime vs Lakewood

    Yes Dave, the zbar is straight and has not been modified. Worked well on the cast bellhousing. As it is right now, the angle of the pushrod is extreme. The fork is too high to line up level with the mounting point on the zbar. Fork needs to be lower.
  28. Charger4404spd

    Bellhousing Experience Quicktime vs Lakewood

    Happened across this thread doing a google search. I just installed a Lakewood scattershield and for some reason the clutch fork isnt in line with the pushrod. When the pushrod is attached to the z-bar and inserted into the fork, it is angled way down. Its like the fork needs to go down to level...
Back
Top