Search results for query: *

Those look great would love to see a final product and what you decide to make them out of too

74 is when all a bodies got shock mounted bumpers. Some early build cars like my 74 Swinger only has them in the rear and not up front A 73 Sport/Duster Should have regular bumper brackets like 72 down If you end up not liking the spoiler for any reason I would gladly buy it off you

Had a buddy use a factory A12 lift off hood on his 69 RoadRunner and he cut he scoop off in half and added like an inch and then put the top of the scoop back on and it looked great. This may be an option for you if you get an AAR hood or something similar for your car

70-76 Duster/Dart Sport/Demon drip rail chrome will interchange as well as windshield and back glass trim. I believe yes they are slightly different for vinyl and non-vinyl top cars but should work on either. only difference is one may be slightly bigger to hold the egde of the vinyl top material

How about delete the turn signals and keep the headlights just use some headlights with the turn signals built in like these https://www.streetrodhq.com/detail/15610/Headlight_7_With_Halogen_Bulb_Led_Park_Lights_Turn.html

Yup you take a 66 or 67 coronet and put a 66 or 67 charger front end on it and is pretty much bolt on too

Darts are the ones don't switch out as easy as Dusters 73-74 Grilles are different than 75-76 Grilles The major difference is the header panel you need a 73-74 Header Panel to use 73-74 grille and a 75-76 Header Panel to use a 75-76 Grille and the headlight bezels are different as well But the...

Please don't chop up a hidaway headlight charger grill unless it is for a 1970 then I don't care cause that's the ugliest of the 2nd gen charger and the 3rd gen grilles are hard to find too

Why not just return it if it was just purchased?

Chicken Wire One layer of it under the floor with fiberglass over then another layer of chicken wire over it all then finish with fiberglass Then respray the undercoating on the car and your done

Dart/Scamp/Valiant are 111" wheelbase and Duster/Demon/Dart Sport are 108" wheelbase the diagrams will be different accordingly

Looks good Greg. What a difference Are ya gonna repaint the black in it? I think I am gonna do this for my 74 now

Oh yea forgot to mention my paint is straight enamel and had orange peel no clear coat

I did on my dart last month 1500 then 2000 then 3000 to get the overspray off the car and hand polished it with Rubbing Compound followed up by Polishing compound Took a week because I did the car in Rubbing Compound right after finished sanding to reseal the paint then did the car in sections...

I would repaint hood and make the call outs body color You are supposed to be able to read them depending on which side you are on

So the water comes from the vents under the dash? If so then the drin holes must be clogged and are located on the sides of the cowl between the fenders

Very cool wish I was that lucky

No Different pattern. Actually looks like gator skin and is 1970 only on all body styles

Yes primer color will effect any color not sure about a candy color though

Black is where factory gromets go. they have a lip that sits above the hood surface and keep most of the water out Red are the spots where holes to mount the scoop go and the 2 holes that are circled with red and purple should be done first then measure the scoop for exact measurements to the...

No Problem and if you are puttin on wheel trim that will make up for some of the difference in measurements as my car has them installed now

7 5/8 inches to center body line and 15 3/4 inches to top of 1/4 panel from exact center of wheel well with the wheel well trim on Measured the center by measureing distance between bottom of the wheel wells

Hey Wood, What car? And which body line? Ok I know the car but which body line? The one an inch or so above the arch or the one that runs down the middle the length of the car?

lol

73AbodEE http://www.forabodiesonly.com/mopar/member.php?u=22758 I believe he used one off an acura or somethin like that

The only way is to remove the shock absorbers the current bumpers are mounted to to go to 73 brackets So the easy thing to do is to drill the shocks and remove all the fluid then with bumper still on Then push it as far back as wanted and may even be able to remove the reenforment brackets and...

Yes it was an option in 73 for all body styles My 73 318 Duster is all original and an original snake skin top car with tan interior and exterior Not sure if it is being reproduced by anyone so if its gone it is most likely gone forever unless NOS material is found

If so could you throw up some pics of them through the top of the hood and where mounted under the hood. I am not sure where to put them and want them on my hood. Appreciate it thanks

my 73 Duster taillights have a white paint for the backup lights and tail lights

72 is last year for them on the fenders or the car at all