Search results for query: *

It had a tunnel ram with two 660s on it for a while. I will measure it tomorrow. There was a trim piece put in when we went to one carb on the Indy motor, but it is easily removed. I will be in San Bernadino Saturday and could bring it. i consult in that area about once a week.

Lol, ,,,,was 101 here yesterday,,( Thursday),,,right before the evening shower came . Temp dropped to 88 in about 10 minutes,,,,,,was 83 after about another hour . This is Middle Tennessee here,,,,been hot like this since I was a kid,,,( I’m 60 now ) . I remember back in the mid 70’s ,,,all the...

All the assclown whining about memes does is "steal" from Bookface posts lmao. Contributes NOTHING. So it's no surprise he sees 100 memes that puts his panties in a bunch, that's all he does.... :lol:

exactamundo. 15x7 is standard cop wheel (with 4.25 BS) and fits wonderfully, but you can't go much wider than 215 depending on ride height and aspect ratio. but then the issue is that with the smaller diameter rim you can't get much more backspace because you'll get into the tie rod or upper...

Well,,,,,the rear will be approximately an inch narrower than stock . The perches will be approximately an inch closer together than stock . The rear will be an 8 3/4,,,,,cut down to an A body length,,,actually less than an A body is because the A body has an 52.6 rear tube to tube end...

...cooler it's still hot enough to sap any motivation to do work. had to make an impromptu yard run to nab some wheels for the bmw project, 100* even in the parking lot. joint was like the surface of mars, eerily quiet with the far off noise of the dump sounding like weird outer space noises...

You of course completely missed the point…so like every other idiot resorts to name calling. Seriously…grow the **** up!

Could you measure where the hole in the hood starts (distance from the front) and the distance from the rear of the hood? Doing a tunnel ram soon and it may work if I remove the scoop.

On the 67 Barracuda the horn relay is mounted to the core support just above the horns, the wire to the relay is part of the engine/forward lamp harness. There is a tiny harness that goes from the relay to the horns. The harness is seen jumping to the alternator. Relay seen behind the horn, Alan

Well, I like lookin at the "real" vintage gal pictures like that. I guess because I'm heterosexual. I don't really give a damn what the meme says. I like female tits and ***. Sorry you don't.

I like that style. Looks like they left the abrasive off the corner too. I've never seen one like that in the stores I frequent. Most have one square edge and one 45 edge but has abrasive all over which is why I nip one of the edges off the 90. I'll have to keep an eye out for one like you show.

I didn't think it said Trump.

Yeah. That's what I'm gonna have to use. Ain't lookin forward to it. LOL

Let us know how it goes. When in doubt, I love this guy's channel: https://youtube.com/@vancouvercarpenter

giggle giggle, I’m so clever

Here's a sanding block, has small angled sides. They work great for tight areas

Thanks man, that helps a lot!

I use sanding sponges but the trick I learned was to use a set of scissors to cut the corner off the 90. It's too sharp and will dig out the corner and cut the tape. Cut it evenly to leave 1/8 or 1/4" wide gap between the paper sides. Later you can come back with some paper wrapped around a...

That's what we have all summer long.

Thanks for the information. I'm going to write it down

Tell that to the guy waiting for a bus who just burst into flames. LOL. A few days ago, here in Topeka, it was 95 degrees with 82% humidity. I was outside doing yard work from 10:00-4;00. I had to stop. I was absolutely drenched.

Is this their pricier steel stator converter? I’ve heard and seen some very good results with those!

There is a LOT that contributes to rad efficiency. Copper tube rads are limited to tubes about 1/2" long because of copper's poor strength. Alum tubes are often 1 or 1.25" long. The extra length allows for much more fin area. Even though alum is not as good as radiating heat as copper, the great...

The T Shirt says TROUBLE. I can see that clearly.

It would be a small farm, but yeah I could make it one. We're on a tic over 6.5 acres.