Search results for query: *

I am not shifting the goal post you seem to take issues that there would be similar psi capabilities so I'm trying to answer you. I don't how many times I have to tell you I've never said more hp, I've stated from the beginning a larger piston will have more force for a given psi, that's what I...

Only replying to your bullshit…balls in your court dumbass.

I have one from a 75 dart, how different are they?

Do you ever shut up? Good for you and your Facebook page. My bad for not being the all knowing like you. Get over the Grandma thing and move on. 50 posts about it is simply retarded. Ever get tired of patting yourself on the back? My mom only had a step brother, whom she didn't marry. Thanks...

273. Now you are shifting the goal posts, introducing more red herrings. What started this discussion was your claim that a larger piston area creates more downward force, increases hp. That only happens if the area increase produces the secondary event of drawing more air into the cyl. Unless...

The square heads will "hook" the two slots on the column as the nuts are tightened.

Do you think you would have been smarter if your mom would have married her other brother? You mean the pictures from my Facebook page? The same page where 340sedan was taking my pictures right after I posted them and that’s why I tag them? That Facebook Einstein? Thanks for playing make the...

For one really were talking an average psi through out the power stroke, it's not a static amount it's forever changing evolving. Your assumption is the 383 B will have less overall average psi over a 383 RB or 408 B vs 408 LA etc.., you have offered zero proof for your position. The overall...

Edelbrock has similar graphs in the instruction manual with their carbs, since they are a Carter copy, so to speak.

I had my wife find one of my 10 mm sockets, I was working on the car prior to a trip back in 2016 and being a V6 had to take the inlet off to change rear plugs, putting the final nut on the engine cover dropped it down the back of the motor, thought no worries it will fall out n the driveway...

The Carter 4070 is an external pump, not in-tank. The E carbs are calibrated with pressure being 5.5 psi. The fuel system is a direct copy of the original Carter AFB/AVS design, which can run with 10 psi. Changing both/either the needle & seat size or fuel pressure changes the fuel level in the...

Yes using the complete kit all of it and thank you for your response . I posted a pic of the complete system.

I did change my name! Cley

Mattax, No I do not want to delete my post. I asked a valid question & I asked it politely..... If somebody asks a rhetorical question, maybe they should answer them so there is no confusion about what was meant...

I'm just curious Steve. Why are you running both pipes down the same side?

It’s the holley set up for ignition all of it the complete system and thank you this info is perfect. It’s the pdm Holley distributor fuel pump everything. Does this picture help ? So tie those 2 together and then run the coil wire to #7 the “pink” wire on the pdm box then should he good to go ?

:rofl:

I had one fail straight after install & heard of lots of other failures. I wouldn't use then.

Yes. Those are high aspect ratio drag tires with big sidewall bulge and lots of flex. You’ll need to get that rim edge away from that leaf.

Are you using the Hyperspark Distributor, coil and ignition box as well? Be really sure you have good grounds. Like Head/block to chassis and battery and battery to chassis. Just did my 69 over the winter and I love my Sniper EFI. I can drive the car dead cold, maintain high idle until warm...

It has a cardboard backed headliner, correct? Those are very easy to remove and reinstall compared to the bow type. I would fix it right.

More piston area does not automatically mean more force on the rod!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! If more air air is drawn into the cyl as a result of an increase in piston area, then more air is compressed & more force is applied to the piston. If more air was drawn in as...

I hate to agree but the Champion plugs have been slipping for a time now. They were my favorite plug at one time. Now I use either Autolite or NGK.

It ‘might’. But on my 70 duster right now with 5x4 and that backspacing it would be maybe 1/16" away from the spring, if not touching. So I guess a LBP conversion might achieve a 3/16" gap between the spring and tire. All this on a 28x10.5. Right now I run 27 x10.2 on a 4.25 bs (sbp) and i...

This is exactly why I don’t order aftermarket stuff. I run 8 pin GM HEI from a recurved and centrifugal limited stock electronic distributor. You can get that **** anywhere.

I'm pretty sure this is it. Fits A-Body B-Body E-Body Windshield Washer Hose Firewall Grommet NEW | eBay This picture was taken for anther forum to show the different in a couple different part numbers. The installed on does have provisions for another hose (not opened up) Alan

Looking for a power steering coupler for a 1964 Valiant. Thanks.