Search results for query: *

I wish you well. Covid is no joke

I think what I'd do is look for an original or reprint parts book, then take those numbers and plug into Google and ebay. There are folks selling that sort of thing on there fairly regularly

Boy I don't know without part numbers or casting numbers, and I don't have any of my old books immediately available (fire cleanup) and some are just plain missing in action. But they are gasketed with a thick "rope" neoprene seal, and I would suspect chineseoization rather than...

Cummins 5.9 weighs a grand if it weighs a pound. Probly closer to 1200

What engine is this? Are you sure the HDK stuff is up to the task of that boat anchor of an engine?

This was an eviction some years back, up the street. A real bunch of idiots. Loose dogs, lots of junk cars a constant stream of people and animals. This was taken from Bing maps This duplex now has two good families living in.

I wish them the best. I had to lock up all 4 on the 04 GMC today going down a 25mph street, some **** pulled RIGHT OUT. I stopped about 4ft from him and sat there with the finger. Sunny day, dry streets, NO reason he did not see me.

Just let me take this to again thank all you guys, some I missed, I'm sure. THANK you!! We now have the main floor emptied, but the walls not demolished. It is a problem getting people to show up and actually work. I've had about 4 completely flake out The basement is ?? about...

Just let me take this to again thank all you guys, some I missed, I'm sure. THANK you!! We now have the main floor emptied, but the walls not demolished. It is a problem getting people to show up and actually work. I've had about 4 completely flake out The basement is ?? about...

I just hold a house fire ever so often, the heat melts that "frozen white ****" right off.............

I doubt it. Wasn't most Hilborn stuff aluminum? Whatever I do, or don't, it will be a long ways off. I need a house to live in, first

Actually we are just getting a little closer to the starting line. Once the basement is cleaned out, or at least to the point we can maybe cover the lathe, etc, it will be time to demolish. Pull out ALL sheet rock insulation, and at least the upstairs wiring and maybe the basement...

Couple more of the sled project HF winch mounted above, with a snatch block about knee level to allow more room when "up." and a small block on the sled. The return line does not actually move, is anchored to an eye at the floor level

Making some progress, and found a temp guy who is a real worker. Got the living room down to wood, along with the smaller bedroom, kitchen, and laundry, yesterday. It was the worst mess. Should get the main bedroom carpet out today. THEN it's on to the basement. Some photos Below...

Found it today back in the laundry room. Not pretty. I guess it could be made operable, but it will take A LOT

If you cannot do anything else, pull the dist out lay it on a bench and find some alligator clip jumper wires. Consider pulling it apart if necessary and connect back with the jumpers and device a way to get power to it. These are essentially a Mopar 4 pin box all packaged up...

I probably will but will wait a bit. Also I don't know the s/n of them

My best Fluke may not make it. It powers up with a new battery, but it was somewhat warm, and the battery leaked. The others I have in the basement are "smokey." So I thought I'd buy an inexpensive tester to get by until I get something better, or see about getting the Flukes cleaned...

Unfortunately, not much, tho I do have a few leads to chase down. I've gotten most the kitchen, about all the living room, and quite a bit of the main bedroom cleaned out and the rug out of the living room. I've had 3-4 2 person teams that were essentially no-shows. One day before...

For decades I was not interested in a ".22" and now that they are worth too much money, I want one.

And ABOUT CB. There is generally a lot less traffic on CB than there used to be and you can buy used radios CHEAP. Do not discount it

What they are doing is using software on the phones to encode/ decode by some protocal into what amounts to sound card input outputs. The audio then goes into the transmitting radio, and the other radio receives and converts it to audio which is then decoded. Radio Amateurs have been doing this...

He found one of my missing pistols, a little DA only Colt 1911 look -alike 380. It's stainless, but the trigger parts and rear sight are not

Randy came down from Alberta for a few days, helped me and yesterday we made a BIG hole in the mess!!

Thanks to all you have helped. Every bit, large or small helps!!! And get this. Randy, "missing linc" came down on vacation from Alberta and put in some hours. We made a HELL of a big hole in part of it. And in the rubble, he dug out my dirty and somewhat damaged but very...

You have to do some research. There are different services, some requiring a license and some not. FRS EG are license free but VERY low power and MUST use radios certified for FRS service. Some require a license. Some that don't have very limited channels and in a busy urban area...

I am not familiar with those, but many engine driven compressors have a device known as a "load genie" and some of those have an idle down feature when the thing is relieving. That may complicate things. These are an unloader (vents the compressor head output) to regulate pressure

This was absolutely a stupid moment of the greatest dimensions. And I've spent about a dozen years in HVAC, worked on nat gas, oil and LP and heat pumps and know all about the dangers and how to avoid them and the safety For some reason I thought it would be a good idea to try out a...

Well I am tentatively moved into the (no water, not now, not ever, LOL) 28 ft trailer. Spent last night, ate "dinner" last night, cooked some eggs and sausage this morning withOUT actually burning the place down. Internet will be further spotty because I am pirating (with their permission) the...