Search results for query: *

Do you have a part number? Also how is it doing cooling it? I have a mild built 318 with headers and I live in tucson az. I want to find something that will keep it under 210 in the summer in stop and go traffic

I will when I get back home. The pin is still there. It just wobbles around because the welds are gone. Im not a welder

Hi. I have a question on how to go about re welding or replacing the passengers upper hood hinge pin. The welds came off and I can't get it from the back. Looks like a hard place to try to reweld it. Was thinking about taking the pin out and trying to get a collared bolt in there. Anyone come...

I measured and they both were the same size.

Hey so i pulled the valve covers and used a snapon jumper switch i have to crank the motor. I saw that he intake valve on cylinders 1 and 4 werent really moving. SlI pulled the rocker shafts off and found that those two pushrods had some scraping on them. I put in the ball type pushrods and...

But if they were milled the intake wouldnt fit

Yeah i agree. But the intake fit perfectly. And the machine shop said everything was good on the heads

Its ok. Any advice would be useful thanks

He heads were sitting for a few years. But i just got them rebuilt about a week before i swapped them

Heads have been sitting for a few years in my shed. The machine shop cleaned them and did a valve job with new stem seals

Thanks!!!

The valves, springs and guides were all from the 302 heads. Only thing i took off the other heads was the rocker arms and shafts

What do you mean height change? Sorry im still learning. I got the 302 casting heads from a junk yard years ago. Just had them rebuilt at a machine shop that i e been using for years. When i called they said they checked the springs and the were good. But. Im going to check for coil binding on...

Sorry. Im tired. I have a hydraulic cam with hydraulic lifters. My slant six was solid cam. There were no shims under the rocker shafts

I know. I want to call in from work today and start checking things out. I work nights amd my next day off is friday. But im going to start checking one thing at a time

The pistons arnt bump top or any thing and have valve reliefs in them

I checked the compression on the 1st cylinder. And my gauge didnt move. Im it was getting late so i didnt check the others. When i hand crank it. You can hear the air from the compression. Im going to check the valve hights. The heads were completely redone at the machine shop. So if i had a bad...

I did. I also got it back to top dead center and checked the timing. Everything is good there.

So i dont know the cam specs. It was in the motor when i got it years ago. I know its a mild cane cam. When i put the pushrods in i had the intake off and made sure they were seated in the lifters. They were the same ones that were already in it. The cam looked really good still. When i hand...

So how do i measure them with the springs on? Do i just measure the spring hight the old heads and see if they are the same as the 302s? I dont have any adjustments on the rockers. What would i do then if they are taller?

Ok. Why would they be different? With the springs on? Would the rockers be wrong?

So i have a 72 318 in my 68 valiant. Its .030 over with a mild cam that i got from a guy about 8 years ago. Ran good but i wanted to give it a little more hp. So i had a set of 302 casting heads that i had redone at a local machine shop. Stock everything. I put them on with a ld4b intake and...

Just got some from another member thanks

I was going to start looking tomorrow. Thanks

Yeah. I want to put dual exhaust using the stock manifolds. So im either looking for the y pipe or separate pipes coming down. I dont have 100s for an exhaust right now

Im looking for a pair of 318 manifold exhaust turn down pipes. I think thats what they are called. I just need the section that connects to each manifold and goes under the car. I have a 68 valiant with manual steering. Thanks

I guess i just have a few... lol

I have a nice set of bucket seats that came out of a 67 barracuda. Got them out of a junk yard here in tucson Az. Had them in my storage shed for 5 years now. Not going todo anything with them anytime soon. Looking to get 300obo. Local pickup only. Sorry cant ship them.

More pics