Search results for query: *

  1. gold66cuda

    Left turn signal issue

    There are 4 contacts in there, one for the front and back on both sides. my right rear wasn't working and everything else was. I have in some cases pulled the contacts out of the switch and cleaned them and got them working again.
  2. gold66cuda

    Left turn signal issue

    I agree with what Dan said above. Just fixed this exact issue last week.
  3. gold66cuda

    Doug's Headers in 64-66 A-Body

    I have 1.14 bars, so about as big as you can get. I did have to give the end of the bars a couple of taps with a dead blow hammer to get the hex through the two header pipes. Its a bit snug going through but not to the point that you have to hit it hard at all. Keep in mind I use the stock...
  4. gold66cuda

    Show us your Convertible Dart's

    My 68 I have had for many years just got it back on the road this past summer. 340 six pack with a console shifted 4 speed and 3.91s. fun little summer cruiser.
  5. gold66cuda

    66/67 Shifter?

    Looks like the mid year 1968 and 1969 Hurst shifter in a 1969 console to me.
  6. gold66cuda

    random engine ****

    Slid this into my 68 ragtop.
  7. gold66cuda

    [SOLD] Inner Fender Splash shield (NEW)

    Hi I will take these. Im in Canada but have a shipping address in Washington if your interested in shipping.
  8. gold66cuda

    Scat procar seats ? Anyone running them?

    I made my own brackets to get the optimum seating position and had the seats covered in Pearl White to match the factory interior. Quite comfortable and keep you in position when used with the full harness on track days.
  9. gold66cuda

    340 six pack hood closing clearance?

    Fits just fine in my 68 dart but as mentioned needs a 3 speed wiper motor.
  10. gold66cuda

    Rookie Mistake...

    These types of places have a guarantee, if you don't go get your car now its guaranteed to disappear!
  11. gold66cuda

    1/2 spacer for 5x4 wheel pattern

    Don't do it, not safe
  12. gold66cuda

    Doug's Headers in 64-66 A-Body

    Well now you found the problem, question is how to fix it.
  13. gold66cuda

    Doug's Headers in 64-66 A-Body

    I think it can only help dropping it down. Would it help to shift it a bit from one side to the other. What heads are on it? If the exhaust flange face on the heads is on a different than stock angle that could move things side to side a bit, probably not up and down much.
  14. gold66cuda

    Doug's Headers in 64-66 A-Body

    I use the stock style mounts, not the Schumacher ones. I have heard of the problem you are having when installed with the Schumacher mounts. I have a turnbuckle tie down from the left side motor mount to block bolt to the cross member and have a bit of preload on it. This is important as you see...
  15. gold66cuda

    72 Plastic inner fender splash shield

    Would you do $80.00 on these if you still have them?
  16. gold66cuda

    What Happened to Showtime Wheels

    I don't know what happened to them but I have a set of their wheels and would like to have get a couple of spares. My understanding is they were originally from Australia and were marketed in the U.S by various companies. I purchased mine 2014 and they sort of disappeared not long after. They...
  17. gold66cuda

    [SOLD] Fiberglass Springs

    Do you know the spring rating on these?
  18. gold66cuda

    Done it and Won it !

    What an impressive season, really the last few seasons! You can setup a car and can that guy drive! Was that not track records at two tracks? Sorry I missed being there for the last race but we were out of town racing ourselves. Hope you guys are back dominating somewhere next year.
  19. gold66cuda

    1966 Plymouth Valiant Signet project

    Nice looking ride, good score, hope to see it around town soon.
  20. gold66cuda

    Never saw something like this before!

    I just threw up a bit...
  21. gold66cuda

    Thank you for your purchases.

    I purchased a set of AR front spring hangers. smooth transition and a reasonable price. I would by from you again for sure.
  22. gold66cuda

    Powder coated my AirGap

    I had my air gap clear powder coated about 10 years ago. I has held up very well and has not yellowed at all and no gas stains either. I think the only drawback is it holds the heat more than when uncoated and that transfers the heat to the carb. You will want to run a heat shield an phenolic...
  23. gold66cuda

    Borgeson ps steering gear in early A- I got questions

    I would assume that any of the factory issued pumps will work with it. I used a reduced pressure Saginaw pump for a better feel. As far as the lines go you just need adapters on the box as it has metric threads. Peter at Bergman Auto Craft carries all the bits you need.
  24. gold66cuda

    Borgeson ps steering gear in early A- I got questions

    I have the Borgeson box in my 66 with Doug's headers and a standard trans, no fitment issues at all. I used an adapter from Bergman for the shaft. It was a direct bolt in, snug but that's the way things are in the early Abodys.
  25. gold66cuda

    Getting a little “Moparish” in my garage

    The right side manifolds are definitely the early 340 on both engines and the left side on the 2 bbl engine is the early 340 as well.
  26. gold66cuda

    Rear disk for 8.75 with SBP?

    Doctor Diff makes a small bolt rear disc set up.
  27. gold66cuda

    Most complete rear disc kit 70 Dart

    Doctor Diff makes a small bolt rear disc set up for the 8 3/4. Use his 15/16 master with it.
Back
Top