Search results for query: *

Hello everyone I found this pieces and Im trying to find out what is use the use for. Thank you

Supposed to be a heavier stamping in the 340/360 but that was debunked once. But they are the same dimensions.

This will be my first winter since 2006 without a 4x4, unless I some across something really cheap. I've never used tire chains in 45 years of driving in Canada, not sure if it's dumb luck or just too dumb to use them.

Bought 2 front loader washer/dryer combo. $200 as they washer "leaked" and the dryer did not match the new models. The "leak" was a rubber 90 on the top that a rat had chewed through. I just muscled the hose around the corner and its still going strong, its a newer design but goes to show you...

Not that there is something wrong with TTI, But curious if there may be something easier to install, maybe like a slip tube header. Would there possibly be someone custom making these that I'm unaware of? This is for a 572 gen2 Hemi using Stage V heads.

I have a 70 Dart Custom, a 70 Dart Swinger and a 70 Dart GT - they are all originally 318 cars so no rallye dash - long standard speedo. All these cars came from the factory with knob radios.

Wow, Better right a book ,,, blessed life Good luck

:rofl::rofl::rofl::rofl::rofl::rofl:

:rofl:

Regular sand is best for traction, won't eat the concrete and doesn't kill the grass. Tire Chains are illegal here in Missouri

Just a reality check - are all stock stamped steel rockers for LA 318s and 340s interchangeable?

We should take this to a DM (direct messaging) before the moderators erase this thread.

I put Cold Case to the test over the last two summers: Three years ago I bought a Cold Case radiator for my 1970 Dart GT through Ken. The last two summers, I put it to the test - a 2 part 13,500 mile roadtrip. I live in Western Washington State and starting in June of 2023 we hopped on the...

Can't believe it would be this, after all this time. But I'd loosen the lower control arm pin nuts, the upper arm eccentrics a little, and lower shock bolts. Then set the tires on some blocks or ramps and retorque everything at ride height! I might also loosen the sway bar links and make sure...

Are you in edmonton. I think I've dealt with you before.

I have a 70. Ralleye dash and frame but not 71. What is build date for your car. Located on tag with serial number in drivers door jam.

The frames were also different between 70 thumbwheel and 71 knob radio. You will find a knob style ralleye dash and frame in a performance dart, duster or demon in 71. If you put add on here for 71 ralleye dash you should find one. The change over in radio style happened in cars after June 1970...

25 years up north and all rear wheel drives. I like tire chains. Your driveway can be meticulous but that isn't where you're gonna get in trouble usually. 4x4s for the last 15 and I still need the chains but I've found a couple 5 gal buckets of beach sand gets us through those icy mornings on...

Both batteries I tried are "starting" batteries. I believe 640 marine cranking amps. I was just out for a day last week. 9 hours on lake, no issues.

150 degree ground temps is what kills the unsuspecting over the 120 ambient. Sun goes down and the heat radiates from the ground. It’s a vicious cycle for months. Then monsoon season arrives and provides enough humidity where the swamp coolers become non effective which makes working in a...

Different variation on this question What head would be better for a work truck, that is also an occasional tow pig? Full bed to capacity about half the time, daily driver all the time? . Assume the short block to be built up the same, only with different choices of heads to top it. I'm...

Since Ive had my dash bezel out, Ive discovered that my dash frame was/is built for a thumbwheel, some previous owner butchered it to put in a knob style. I guess I either have to find a proper replacement frame, or get someone to do some welding to my existing one, which in itself may be very...

Timing Chain Set is SOLD TRW Pistons are SOLD

New Dynamic 8in Transbrake Converter Netural Balance Wide Ring Gear 904 Transmission 5000-5500 Stall Depending on Torque HP $1150 Pick Up or Can Ship Western PA

Already have a plow lined up for our 96 Jeep….. now if I can just get out of this oven and give that winter gig a whirl!

The shifter mount that was on your transmission when you got it is for an Inland shifter, which you absolutely do not want. @66fs has the entire exact setup you want. If for some reason that falls through, I have the same parts (I'd just have to find 'em all!). I think mine has the plain...

I have a 1964-65 a833 9 1/8 clutch trying to find out what the minimum spec on the flywheel is we are trying to turn out the hot spots without going over the minimum thank you

I appreciate that! I have owned 3 M code 1969 GTS Darts all bought from Saddleback Dodge in Calif. Also 3 1968 Factory 1968 Hemi Darts. All back in late 60s and early 70s.

I can't wait until the day my big *** cold case goes in my dart, because that means it's close to rippin'

Pair of 14 x 7 SBP Auto Drag Centerline wheels Clean – 3” inset, no dings, no caps, need a good polish $400 for the pair plus shipping from 33710 St. Petersburg, FL