Search results for query: 66 barracuda

I’ve had a 66 Barracuda for the last 30 years, and they’ve always been called early A bodies, why would you expect them to change the name of this sub forum to suit your opinion? Follow the herd? When I first got my 66, I was literally the only one buying parts, guys at the Nats and other swap...

Yup confirmed the 64-65 fits a 66

Yeahhhh... it's gotten worse. I last commented on this thread a few years ago. Things have changed since then. '70 Dart Custom, 340 4 speed (owned it 22 years now) '67 Newport Custom, 383 727 '66 Chrysler Windsor, 440 727 '49 Fargo 1/2 ton on '66 W200 chassis, 440 4 speed '57 Dodge Royal...

In box is still full. You might want to give me a call.

Interesting one here. My 66 early a has no horn. If I ground the relay they work. I have ohm checked the black wire to the horn button- no resistance- good wire and good contact. The main steering shaft is isolated from ground. Anyone see this before? The ground stops at the Borgeson u-joint...

The upper quarter panel spears are aluminum on the '66 Barracuda also. You can use those and the 4 door ones on a convertible by cutting off the excess length on the rear of the molding. The '64-5 Barracuda uses a stainless one, but the width and contour is different and won't engage the...

Your in box is full. I tried to contact you.

64-66 blower fan. Got it from this sight last year, just tested... Blows hard. $60.00 shipped. Check or MO. Thanks, Ben

So I have begun the cleanup on one of the 66 Barracudas I recently drug home. This car is over all really really solid. I got the outside cleaned up as good as I can for the moment, and I need to get to the inside. Unfortunately it seems the passangers side door latch seems to be seized up fro...

The hardtop and convertible are the same though.

Looking to my ABody Friends for a little help, I’m rebuilding a 1976 360LA engine to put in my 66 Barracuda. I found an era correct Mopar Viscous 5 blade offset clutch fan that I would like to use on this engine. I’m having a problem finding a replacement clutch where the shaft of the clutch...

When I retired I decided my long-delayed desire for a fun 60's car was going to get filled. I had a 67 Dart and a 73 Duster way back in the day, and while I like other cars too, I have a stronger affinity for Mopars. After much searching and evaluating, I decided I wanted a 66 Valiant, and...

They look great! I am a fan of the 66 67 style for the Dart and Barracuda myself.

When I was a youngster cruising around in my Barracuda there was a 66 Comando 273 conv around town. Young and no money otherwise I would have knocked on his door

Very nice! Great job Rick!

I'll try to get some this weekend. What exactly do you want?

Since that's a 68 Barracuda and if you want to be correct...use 68-69 B body seats. The 66-67 will work, they just have a hard shell back and a little chrome trim strip. The rails however are a-body unique, ones from a 67 Barracuda (or Dart) WILL work as well. Just need to swap them...

I'm pretty sure the zbar from 1964 to 1966 are all the same.

My 66 Barracuda had the frame mount for the Z Bar fail back in the 1970's. The mechanic back then welded a patch to the frame and it basically works, but its not in exactly the right place. While it is on the rotisserie, I want to address this and bring it back to the as-designed state as...

Not with that particular dash. I had my entire facia from a '66 Barracuda done (no gauges, just all the dash plastic pieces) with Gcar, and it was expensive. Approximately $900. Looks great though!

I probobly have a lot of what you're looking for. Just picked up a ton of 64-66 Barracuda/Valiant parts. I'll be going to my storage next week. PM if interested.

As a guy who has a highly modified 273 commando engine in my 66 barracuda with auto and ac. Mine has a factor radiator and fan shroud and clutch style fan. No issues getting hot. I tried the aluminum radiator route and honestly it had a tough time like yours does. I’m not saying the aluminum is...

1960-66 Mopar Dodge Dart Lancer Plymouth Barracuda Valiant Gas Cap Stant G27 NOS | eBay

Back in January I started reupholstering a set 66/67 Charger front and rear buckets and buddy seat to see if they’d sell at the Nationals last week. They didn’t so I decided they’re going in the 47 since they got new foam and the new upholstery. I’ve got a gold 65 Barracuda interior I was...

FYI there was no "Super Commando" Thanks for the share.

I have read the engine removal thread for 273 V8 and manual trans. here ( Engine Removal ). I have a 66 Barracuda with stock 273 4bbl and A-833 and it is being disassembled so hood is off, radiator our, fenders off, etc. I am doing an "out the top" removal as we have to have it rolling until...

Nice thing about the 453s is they fit just about ever model Dodge Challenger (70-74) 273-360 Engine, Charger, R/T (66-72) 273-360 Engine, Coronet, Coronet Wagons (62-72) 273-360 Engine, Dart (67-72) 273-360 Engine, Demon (70-72) 273-360 Engine, Super Bee (68-72) 273-360 Engine, Plymouth...

Yes, the curve is the same, but, where it ties into the side trim is different. The Barracuda has a rocker molding, the Signet has lower side trim that's in a different spot. It would leave gaps and you'd have to cut a slot if you used these on a Valiant Signet. The other '66 models didn't come...

RRR, I will try and get a couple pictures this weekend. I cant say on the convertible but, I'm pretty sure the Barracuda seat is a little narrower than my Valiant's original ( for the buckle that held it down ? )

'66 Barracuda - double-pot master cylinder and shoulder harness