Search results for query: header wrap

Don’t wrap the starter. Wrap ur header. My Mopar performance mini is from 1998. Still going strong. Kim

Normal cheap header stuff. You have to fish the socket under that horizontal tube and either use some wobble extensions in the attempt to space outwards to get a ratchet or try to get your ratchet under that tube along with the socket and maybe a real small extension. Most spark plug sockets...

My experience with D453 in my 70 Dart Had to use washers to raise the drivers motor mount to clear the power steering Steering coupler is hitting, will need a u-joint adapter Will need high heat wrap on the PS box to preserve it 1.03 PST torsion bars required header dinging to clear...

Ditto Long Island, lived my second half of life in Suffolk county. The exhaust manifolds are the most quiet and heat easy in the engine bay. Headers release more heat, coated, slightly less. If they’re wrapped, heat is close to exhaust manifolds, but there’s caveats to it. The wrap retains...

Surplus center has metal ones. I thought you did run the exhaust out? Get a extension somehow and wrap it with header wrap. You got lucky. I would add a simple temp switch to shut it down if it gets X hot. No idea what that would be.

...for the cable to go anywhere else but through the header to where it would be in contact at some point with the header. I have thought of header wrap as well as wraping the cable with thinner heat wrap tape. I have however had issues with the shift cable in the past if it is not a smooth run...

I understand what you're saying and I'm going to focus more on the cam timing as you mentioned

- New Dedenbear Linkage Throttle Stop Kit # TS10K = $280 ($464 @ Summit without the large cylinder mount and extra (red) tubing) (The larger tank shown In another picture is included in this kit) - New ZEX / Comp Cams #82010 Nitrous Purge Kit = $80 ($130 @ Summit) - Thermo Tec Copper Header /...

I wrapped my fuel line in header wrap where it was close to the exhaust. You might consider relocating the fuel pump if possible. You can also make a deflector shield to mount.

Scavenging was only mentioned on engines at 350 cubic inch or less and at a maximum power of 400 horsepower. I don't want to name the header manufacturer but they showed were the smaller tube scavenge the cylinders better than the 1 5/8", although the 1 5/8" is still a good size. You simply...

I really don't want to move my fuel pump unless I absolutely need to. The way I had my 1/2" braided gas line plumed was very expensive. This is why I am wondering if using exhaust heat wrap would work.

74 dodge dart sport I plummed my braided fuel line to elec fuel pump then had my 3 inch exhaust put on yesterday and the passenger side muffler ended up about a 1/2 inch from the electric fuel pump and about a inch from the passenger side air shock bag I bought some 1800 degree header heat wrap...

You don't get that very crisp distinct header sound as much with manifolds, especially if you wrap the headers

Wrap the pipe with header heat wrap.

this is how i used to do it with cheap headers. it was so nice once i changed to tti headers. those plugs sre wide open on tti's

Yeah this is my first encounter with headers. I’ve ran manifolds the last 15 years but picked up new in box from the 90s Hedman for almost nothing. Now paying the price lol.

How's does VHT blue exhaust header paint hold up? Does it fade quickly? I've got some cheap Hedman headers I was going to wrap and paint blue.

...I happy. So today I pulled the headers off (that gets them out of my way) to install that shifter cable Rusty, and my kick down cable, header wrap near my brake lines, starter and transmission. I wanted to hear the valve train and cam bearings because this engine sat ten years , but done...

he had a recent video where the header flange looked like it was ran over with a bulldozer, that must be a "donated part" anyway last i knew Headman headers and wrap were real cheap so why play around with those scrap metal headders only to have problems later? UTG is hell bent on "on the...

Not sure that would have prevented the oil down... 1 rod impailed his TTi header and I think some shrapnel went thru the pan .

I agree with loosening cap when it starts acting up. And you are better off to wrap the header instead of the fuel line. Im running a el cheapo facet pump on my 360/thermoquad and it seems to provide enough fuel. If i let it idle too long when its hot, it will start running rough and pump gets...

Good Morning Everyone. Did some tinkering with the Demon this weekend. Got the door locks to work, some header wrap, etc. Went to a car show 30 miles away yesterday. Car worked great. Should be ready for MITP.....I think. @Sublime one sorry to see you wont be there.

We have a Kite and Sparrow hawk around here that are super fast flyers, haven't seen any Coopers here that I can remember, cool shot Mike Helped a friend do this 15 years ago, keep up the good work, so your son took of to s.w.a.t. school before he could help ? I have a banner I removed from...

passenger side is a generic LA header drop in, everything fits! Driver side is the bear. The designs with the #1 flying back then down are good, but the ones with the #3 going back then down have a fighting chance of fitting with only the #5 being redesigned. The time spent remaking the hookups...

...hard… how’s the garden hose scavenging the air from sucking on it and blowing? My cooling system is so good, I have problems getting the car over 190. So yeah, the coating make no difference, header wrap may, but I’m not wrapping my newer headers… So yeah most of what you’ve heard in poop….

...! $10 for the lot #8 Column shift indicator light. Works and in good condition. Not sure of years. #9 Starter relay . $5 #10 SOLD...413 13 feet of left over 2" header wrap and 3 SS tie bands. $5 Thanks for looking and scroll on down for more parts ! Please claim by #...

If your line vapor lock is happening after a WOT, its getting heat soak from a header/exhaust pipe. Shield or wrap the fuel line prior to the pump. If you use the corvette vented fuel filter and your return line, it can't vapor lock up there (past pump) as the (boiling fuel) pressure is going to...

A lot of great options and I and ya did wrap that header tube i may need to re wrap it. Thank you all.

Agreed, this is a well thought out combo . Dougs headers, straight thru ultra flows, 3 pipe, listening to sound clips, discussing with other members, personal experience, should cover it. I even heard that header wrap will give it a crispy sound. .