Search results for query: slant to v8

I have some used V8 valve springs if you're looking for some. Cheap & nasty, just the way you like em !

The v8 is a 72, slant is a 85 Slant has been rebuilt,

I'm doing the swap from a Slant 6 to a 273. Does anyone know what shift linkage will work on the car? The car is a 65 Valiant column shift car. I have a 66 273 with the V8 904 to install in the car that currently has a Slant Six 904 and associated linkage installed. Thanks

?? 727s are not manual transmissions, they are automatics... you need to figure out what you really have there. Regardless, there is no slant 6 transmission or bellhousing that will bolt up to a V8. Big blocks, small blocks (both LA and Magnum) and slant 6s all have different trans. to block...

I have a good core that needs rebuild, but I want to find GOOD running slant, or at least decent compression! Any of you V8 guys pulled one out that needs a good home??? I am down N of Houston.

Hello All, Looking for a V8 Centerlink that will fit a 65 Valiant. I'm swapping a Slant 6 to a 273/904 and need a center link that will fit. Thanks in Advance

The only thing I can think of that makes a slant 6 any good, is the cost of a car equipped with one compared to a v8 car. You can get slant 6 cars cheap. That’s a plus right?

Looking for a 68-72 slant sux K frame if anybody has a straight one they plan to scrap because they are doing a V8 swap. I would be interested in it. Thanks Matt

I think he's referring to what was done to his specific car before he purchased it. Not Barracudas' in general.

Rick Ehrenberg once stated that the factory defaulted to the V8 version at some point. I don't recall if it was for production cars or replacements through the Parts Division. Why not? The V8 Center Link fits everything, the slant six version only fits slant six.

First, you might want to remove the timing tab, clean it, and paint it to highlight the marks. Makes things a lot easier. Is this a slant six or V8?

I don't have any V8 stuff. My plan is to run one of these used slant 6 camshafts I have anyway, so I'm probably just gonna use the decent looking slant 6 springs I have. Cheap & Nasty.

pass side slant to v8 conversion is truck mount bracket IIRC. Or really close in dimension https://www.engine-swaps.com/products/67-72-a-body-s6-to-273-318-or-340-360-conversion-kit Unless he put a V8 K frame in the car, that looks like the correct engine bracket for the slanty K

Slant only, have V8 also. Man they do work great and get rid of the Mopar ecu's, Electronic dist. only

I'm doing a Slant Six to 273 Conversion from a 65 904 to a 66 904. . I'm looking for a 66 Valiant/Dart/ Barracuda Column Shift Power Steering column with a 904 transmission linkage for a V8. valiant power steering column Thanks

I have a Holley 1 barrel off of my 72 scamp 225 slant 6. The carb is clean and the motor runs good and idles good from a jug. Swapping to a V8. $50 plus shipping from 49341.

Someone show him a picture of the slant and the V8 drag links he may already have a V8 drag link because he has a 64 and the V8 was an option, I wouldn't doubt some 64-66 slants came with V8 drag links.

Yes I need the ones to fit a Slant 6

That looks really nice!! I like the color. Are you putting the slant back in or moving up to a V8? Either way, I’m watching this thread!!

A 727 behind a slant six with an 8 3/4 with 3:90 gears stock that all by itself is bad ***. He has all the V8 Mounts to go with it too.

Yep. The top one was off of my '66 Dart (slant six). Even the non-V8 versions have a bit of a drop to them.

The title of the thread: "1965 valiant 225 timing issues".

There are no "special motor mounts" for a V8 to slant 6 swap. Only if you're doing the opposite. On a '72 K frame (applies to '67-'72), the left (driver's side) K frame mount is the same whether slant 6 or V8, so that side will bolt up with stock factory slant mount brackets of the correct year...

Over 20 years ago, I was debating to build the slant six in my Dart or swap in a V8 when I found somebody was selling a K-car turbo with a flange welded onto a slant six manifold, and a carb that was prepped for boost. Turns out the manifold wasn't very well welded, the turbo was too small, and...

And yet Chrysler Australia had the 265 cube straight six bigger displacement but lighter the next size up from the GM 253 was a 308 then the 350 and for only a couple of years the 327. Chrysler after the 225 slant had the 245 cube straight 6 then they introduced the 215 low compression base...

You have an awesome Dart;) You know, I really tried going with the idea of a V8 and wasted too much time on it. The slant six that I do have is in the machine shop as we speak, a good overhaul, with an increase in compression(9:1) along with the Super six intake and modded cam (thanks to...

Hi all As you already know, the gearbox swap is scheduled on tuesday, Sept.17th at a professional mechanic shop. Yesterday, I found this affirmation from a guy on another Mopar forum : "If your using a clutch linkage set up, make sure to get a Z bar from a V8 car. The slant sixes have a...

I need a gas pedal/bracket from a 64-66 V8 or slant six with a/c car. Converting my 65 from rod to cable. Thank you, Jared

Which has nothing to do with the box

i never disputed that. but for the work and gear to do it is more then a bigger cube V8. plus the six just doesn't have the sound of a V8.