Search results for query: *

Replied.

A pair of SBP A body 8 3/4 axles 27 11/16ths from splined end to outside edge of flange. Thanks! Doug

Thanks! Trying to have the parts on hand so as not delay the swap. Much appreciated.

Rear is not in the car yet. I guess I assumed any 904 to 8 3/4 would be all be the same but thinking about it, realize a 904 to an 8 3/4 was probably not a normal factory thing. As soon as I get it hung, I'll measure. Tail of trans to centerline u joint on rear end?

Anyone got one that will fit a 67 Dodge Dart?

Sorry it took so long to respond. Been busy and just got the car on the lift to get proper pictures, but yes, that is what it looks like is on mine. Will I not be able to use this for the 8 3/4? Pictures for reference... https://dougritchie.smugmug.com/Dart/i-n5NWXb6/A][/url]...

Insulator?

Hi all, I'm going to be putting an 8 3/4 in my Dart. The center chunk was out of a '67 Coronet, and it's going onto a Dart that had a 7 1/4 with a 273 and an auto trans. Anyone know which u joint will work for this set up? Obviously going to need to shorten the driveshaft as well, but curious...

Thanks!

Okay, last question on this, I promise. I have that annular ring and am getting ready to do the swap. On that ring, do I put it on the nose of the converter and then install the engine, and do I need to grease it or anything? Thanks!

Thank you!

I'm going to be installing the 360 in my Dart this month. I am using the mopar electronic distributor with the orange box. I have the proper ballast resistor, but what ohm coil should I use with this set up? Any particular coils that you like better than others? I the Pertronix Flamethrower...

Thanks!

As a follow up question, I see that Walmart carries the Envirosafe cans. How much will I need to refill the system, and can I do this myself?

Very cool info. I didn't realize we had moved on from R134. Does using Duracool or Envirosafe require line changes? My originals are in really nice shape.

I used EQ heads and they look like the bolt holes on them are the same, but I guess I'll have to take a closer look.

I don't have the original plate, but a conversation with Mancini this morning confirms that AA241 (aka 10241) is the plate for Magnum to 904. At least according to them.

Thanks for the replies. Rest assured, I didn't mean to make it sound like I was going to vent R12 into the air. I'm going to have it evacuated. I was curious as to whether or not, I needed to be careful with the lines being opened after with relation to humidity, dirt etc. Sounds like the best...

Okay. So I'm getting ready to put the Magnum I built for my 67 Dart with air conditioning. I have never done a motor on a car with air before, so I have a couple of questions. Is it safe to just disconnect the lines on the A/C ? Will it damage anything not having freon in the system while I'm...

Interesting. I'll have to call them again. When I ordered it, I specifically asked if this was the one for the Magnum and 904 and they said it was. I'll call them again and find out. Thanks for the heads up. I didn't question it because it referenced the B&M number.

mancini is reproducing it. they call it the AA241 Mancini Racing - Balanced Flex Plate

I have the B&M 10241.

Thanks all! I have the correct harmonic balancer and the correct B&M flexplate. I also purchased the bushing for the nose of the converter, so if it's a neutral balanced converter, I guess I'm good to go. The Magnum I built is to the Mild Magnum build which should be around 410 hp and around 450...

If I understand correctly, the 273 is an internally balanced engine. Am I correct to assume then, that the stock torque converter is unweighted? I ask because I'm going to be installing a 360 magnum into the car that has the weighted harmonic balancer and flex plate. Do I need to pull the...

Here's my issue. I've built a 360 Magnum like the mild magnum build here on this site. I'll be starting the install of it in the next few weeks. My car is a 67 Dart with its original 904 with 18 spline and its original 273. Performance torque converters for this are either non existent or...

That air cleaner also has a drop base to give me clearance in case the Speedmaster knock off air gap intake is too high. I also was able to get the correct B&M.

Very cool. I went the same route with my 67. After doing the math and considering hopping up the 273, decided it was more fiscally prudent to just build a Magnum and get the hp I wanted. https://dougritchie.smugmug.com/Dart/i-RpFzMwH/A][/url]

Thanks!

Anybody got a pair of these laying around? The price for new ones is outrageous. Picture for reference

Damn. I need an 18. Hoping that I was gonna get lucky. Thanks.