Search results for query: *

Thanks guys,, that may be what is on the car now,,,,,er-go no gaskets now,,,,,trying to nail down a hesitation,,, new carb kit, new accel. pump. Timing is correct,,,,wondering if I should replace the 750cfm E-brock with a Holley,,,,

I have a 1970 Doge Dart 340, 4Barrel. When we took the carb off to put a kit in, there was no gasket between carb. and non-metallic spacer. Do not know if there is a gasket under spacer, did not take that off. So, when using a spacer, should there be 2 gaskets, 1 above spaer, and 1 below ?

So,,,,,,,,,,,,,,,,I have a question concerning the distributor on my '70 340 Dart. It has an MSD Digital ignition,,,,, but,,, on the distributor,,, there is a vacuum advance dash-pot on it. Mine is not hooked up to engine vacuum,it was not hooked up when I got the car,,, I have seen guys go...

I took a plug out, it was an NGK GR4 V Power, it had a nice sandy brown color to to it, but it looked like it was about wore out,,,,So, I got 8 Gr4 on the way,,,,

My body shop guy was doing some body work on my Dodge Dart, and he said we can pop that spring on for you, and they did. He said it was not fun,, he held spring stretched,,,, with washers,,,,, but they would not fall out, so he had to tap the springs out with a small punch. Clutch works easier now.

Thanks for the info,,,,,the AV fuel I think is around 100 octane. Plus it has some lead in it, that should be good for the older engine,,, I think ,,,, The guys at the airport say it works good in old tractors, and lawn mowers. Also use it in your portable generator for power outages,, it will...

So, if I go with Champion N12YC plugs,,,, and use Aviation Fuel in my 340, it should run very good ,,,yes ? or should I use 93 octane instead of aviation fuel

I realize asking for 'what plug' can lead to a lot of thoughts, so here is question1970 Swinger 340 4spd. I was told I had 10.5 compression, I use mostly,,,,, straight aviation fuel I get from the local airstrip. I tend to favor Champions, does it really matter, which one of these 3 ? RN7yc...

Thanks guys for all the tips,,,,, My clutch works fine,,, it is just very hard to push clutch. I guess I can put it on a hoist, and look to see what clutch is in it and see if there is a binding issue. It pushes too hard so I am thinking it does need the spring. I had a Swinger 50 years ago...

I saw some discussions about the over center spring. I do not have one, and my pedal is "VERY" hard to push. I do not know what type of pressure plate I have [just got car in Sept. last year ] I am not real smart with cars , but I do not understand why a diaphragm pressure plate, is not suppose...

This a 4 speed manual transmission,,

70 Dodge Dart Swinger, 340 4spd. Anyone ever dealt with this ??? All of a sudden, the key does not turn engine over. No light dimming,,, when key is turned , just nothing. Battery cables are clean and tight, Maybe solenoid is stuck,,,, dunno' ? I looked in my big yellow Dart manual, hoping to...

Well first of all,, Thank You for your input,,,, I am sorry if I sounded like Perry Mason,,,, but I was Lost in Space,,,,,I am still confused how a turn signal problem, is cured by using the tail light circuit,,, but if it works,,,, I have no case,,,,,,so I must accept the verdict,,,,,Thank...

Well, then it is not a polarity thing, but the LED lamps are wired wrong ?? The green is 12v pos to park light,,, purple and red are 12v pos to each turn , the socket is grounded,,,I have to think your idea, is just a brighter park light,,, as it is connected to the brighter element in lamp, ...

I do not understand that,, at the light assembly it self you have the turn signal wire ,, the parking light wire, and the socket,,,, the socket has to be grounded,,,,, so what wires are you reversing ????

When you say reverse wires,,,, was that at the flasher connector ? I see there is a pigtail flasher,,, that says it is blind to polarity,,,, aka,,, Bipolar in a good way,,,, but that may still try to put negative voltage to the lamp,,,,,so,,, rather cut and spice,,,,,,maybe this:: United...

I the flasher on the right, works fine in the 4-way flasher socket, with LEDs, regular, or a mix of lamps. But that flasher does not work in the turn signal socket, with all LED's, but does with a mix. The flasher on the left, with pigtail, does not work in 4-way flasher socket with all LEDs, no...

I wonder if this is what I need for the turn signals ? 2-Prong Electronic LED Turn Signal Flasher Relay EF32RLNP BIPOLAR !!!

Thanks all for the tips,,,,

That was my next move,,,, #2 flasher in flasher socket [since it works ] and try #3 pigtail flasher in the turn socket,,,,, Thank you for Comment about our Swinger,,,, this winter it is being painted lime green, since that was the color of the Swinger we had when we got married in May of 1972...

I think I got the 4 ways figured out,,, using 4 LED 1157 lamps, 4 way flashes fine,,, but with 4 LED lamps, the turn signals do not work, do not light up, could try the Combo flasher with ground wire in the turn signal plug,,,if that does not allow turns signals to "turn",, I guess swapping the...

So,,, have a mystery,,,,I am putting LED lamps in my 70 Swinger, I now have LED lamps in the rear [reverse, stop/tail] only, I tried that setup, did not work correctly. So got an electronic LED/Regular lamp 4 way flasher, and turn signal flasher to replace the original thermal flashers,,, works...

Success,,,,,my grandsons found the turn flasher, near passenger side bottom corner of radio. near orange flower on previous post. replaced old flasher with electronic one, so as to handle LED lamps. Holding off on instrument lamp upgrade,,,,need to build up some courage. Thanks all for the help !!!

Holy WOW,,,, Thank you guys !!!! what a list of things to try !!!

What is the a common discussion here on keeping mice out of a stored vehicle. I use moth balls/flakes in my pontoon boat,since it is open air so the aroma is not so bad in the summer while cruising. That wont work in a closed car,,,,, so here we go,,,Irish Spring soap, dryer sheets, homemade...

Thank you again fellas',, you are building my courage,,, I read some where the wire harness is very short and stiff,,,if there is a plug/connector for the dash instruments,do i undo that from below,,,same goes for speedo connector. Or pull dash out carefully,,, to gain just enough access to...

Thank you all so very much,,,, wonderful ideas and help,, if I was younger, I would just try to pull the dash out, as the driver side defroster hose, that we put on, is on but maybe not all the way as well as the other issues. But I am old and nervous now, lol. I agree the led indicator lamps...

So,, the illusive turn signal flasher, it works now, but I want to put in an electronic flasher so I can go to all LED lamps, I have LED lamps in the rear, normal lamps in the front,,, like I said , we can hear it clicking, but can't find it,,,,,so I sent a treasure map,, with colored targets...

Thank You,,,,