Search results for query: *

1 pair A body front spring hangers small spring eye bolt type. Sandblasted and epoxy primered. Not pitted to ****. All studs in very good condition come as shown with used OEM spring eye bolts and lock nuts. $65 plus shipping. Located in west Texas. I accept PayPal.

67-68 plymouth dog dish caps. Some minor dings here n there. Look pretty presentable though. $150 plus shipping takes em home. Located in west Texas. I accept PayPal.

A body rear upper shock studs with washers and nuts as you see shown. Glass bead blasted. Threads are real nice, no pitting. Coated with light machine oil after pic was tsken, and ziplock bagged to prevent flash rust. Asking $35 plus the ride. Located in west Texas. I accept PayPal.

I have 3 pairs of new construction shock plates. Last pic shows 4 pairs, one pair in the pic is for my sons car that's why ad is only for 3 pairs. These come with the shock pin bolts, washers etc. as you see them. New construction out of 1/4" thick steel plate, thats been cad plated. The holes...

2 pairs of shock plates for mopar 8.75 and ford 8.8. These are made to fit a mopar 3.0" axle tube and the ford 3&1/8" axle tube. Made from 1/4" thick steel plate that has been bichromatized to help prevent corrosion. Leave as is or paint to suit. The holes are slightly ovaled to allow these to...

73-76 A body brake booster to firewall mounting brackets, and support brackets. Everything is clean and in great unpitted condition. Perfect for a restoration. $75 plus shipping. Located in west Texas. I accept paypal

67-68 plymouth dog dish hubcaps. Set of 4. What you see is what you get. $80 for the set plus $20 shipping lower 48. Located in west Texas. I accept paypal.

1 pair New manufactured shockplates that fit 8.25, 8.75 3" axle tube, and are slotted enough to fit ford 8.8 3&1/8" axle tube. Pic shown with U bolt and nut for 8.8 axle. You can see plenty of clearance from the ford U bolt nut to rolled edge of plate. These are 1/4" thick plate steel. Primered...

Aftermarket A body brake booster. Barely used. Bought with intentions of using, went different direction on the build. Fits 67-76 A may fit earlier years but not sure. $150 plus shipping. Located in west Texas. I accept PayPal

1 pair of new manufacture shock plates. These are custom made out of 1/4" thick steel plate and holes are slightly ovaled out for Ford 8.8 and Mopar 8.25 and 8.75. They have enough space from the mounting holes to where the 90° flange is for the wider 8.8 U bolt. Pix with the nuts are of the...

69 barracuda front parking brake cable. In good condition. Slides freely. Should fit all 108" wheelbase A body cars from 67-71 possibly 72 but not sure. 108" wheelbase would be 70-71 Duster, Demon, and 67-69 Barracuda. $30 plus shipping. Located in west Texas. I accept paypal.

I got pair of shackles off my sons project car when we pulled the rear out. I dont think these are A body. Stock A body bushings are too small diameter to fit these. Is it a possibility these are B,C,E body or truck. Pretty good condition w minor surface rust. Asking $20 plus shipping. Located...

Universal polyurethane end links. What you see is what you get. New unopened bags. Comes with washers, spacers, bolts, and poly pieces. $20 plus shipping. Located in west Texas. I accept PayPal.

I have 2 steering column mount brackets. One is a 67 only. This one was sandblasted. And repainted. It's a bit scratched up but would repaint easily. The 68 up needs to be blasted and painted, but is not rusty. Asking $20 for the 67 bracket plus shipping and $15 for the 68 up bracket plus...

1967 only A body idler arm Good used condition. No play in either end. Sandblasted and painted outside. Comes with new cutter pins and nuts. Asking $40 plus USPS small box flat rate shipping. Located in west Texas. I accept paypal.

73-76 disc brake setup. What you see is what you get. M body spindles, A body discs, calipers, and UCAs. One UCA has new bushings, the LH one needs bushings pressed in. New bushings for that arm are included. AFT bushing hole on LH arm appears to have a tack weld repair for a loose bushing...

Pair of M body 2.75" big bore piston size rebuilder calipers with pair of new 2.75" chrome steel pistons, and seal kits to rebuild. I was going to rebuild these and sell them ready to install. Dont have time to mess with them. $65 plus flat rate shipping. Located in west Texas I accept Paypal.

67-72 SBJ UCAs. Farm fresh clean west Texas parts. Not overly pitted to **** rust belt stuff. Great to replace bent or severely corroded originals. $25 plus $19.95 for a ride in a large flat rate box. Located in west Texas. I accept paypal

1 pair of caliper brackets for 73 up disc brakes with 10.80" rotors. Asking $35 plus shipping. Located in west Texas. I accept paypal.

I have 1 pair of big ball joint upper control arms. Right side has been cleaned , painted, and has new bushings installed. Left side needs to be cleaned up, painted, and needs the bushings installed. Left is a little crustier than the right. Should sandblast up ok though. Asking $125 plus...

73-76 A body slider calipers. 2.60" pistons. These need new seal kits. Pistons are probably ok, if not rockauto has it all dirt cheap. I would rebuild them but dont have the time. $60 for the pair plus USPS medium flat rate shipping. Located in west Texas. I accept paypal.

BBJ UCAs. These look like somebody stubbed some BBJ ends to a set of SBJ UCAs. Look like they been running around for awhile that way. Not sure how expertly this was done. As such i am not asking a whole heck of a lot for them. $60 plus the ride. Located west Texas. I accept paypal.

67-72 A body steering center link. Farm fresh lol. $50 plus shipping. Located in west Texas. I accept paypal.

67-68 plymouth dog dish hubcaps set of 4. Every one of them has a flaw be it a scratch or a small ding. Not bad for a daily driver. I finally rounded up a set of 4 needed for my project, these are whats left. Asking $100 plus shipping located in west Texas, i accept paypal

67-72 A body V8 centerlink. Good condition. Light surface rust. Asking $50 plus shipping. Can beadblast for a bit more $$s located in West Texas. I accept paypal.

Used 1967 only idler arm. Good condition. Not sure if oem or aftermarket. Both pins are tight with no play or slop. Part has been sandblasted, primered and painted. I'd recommend drilling and installing zerk fittings. Comes with new cotter pins as shown. Asking $40 plus USPS flat rate shipping...

67-76 A body Lower Control arms. Non swaybar tabbed. Farm fresh. Light surface rust. No deep pitting. Ready for your customization. Asking $100. Located in west Texas. I accept paypal

Mopar 8.75 pinion snubber. Sandblasted clean. Minor pitting. Easily rectified with pinhole filler if that bothers you. If not, its ready for primer and paint. Asking $30 plus shipping. Located in west Texas. I accept paypal.

Set of 4 U bolts and nuts for 3" axle tube. Off a 1969 Fury rust free west Texas car with 8.75 axle under it. I did a cursory sandblasting to verify no major pitting on them. No pitting very clean parts. $50 plus $8.00 shipping anywhere in the 50 states. Additional on shipping outside U.S.A...

Nice pair of FMJ spindles with caliper mounts. Off a west Texas 84 Dodge Diplomat. Perfect for A body disc brake swaps. Spindle nuts, thrust washers, and castle nuts are included. Also threaded in and included are the bolts for the dust shields and caliper attachment. Asking $175 plus $20...