Search results for query: drivers side manifold

Thanks Troy, I don't really know much other than manifold port is on drivers side.

Robert, if you can find an A body drivers side manifold from a 72 and up 340 or 360, it is the same thing as the early 340 Hi Po drivers side manifold except that it has tabs cast on top of it to hold a heat stove for a pipe running up to the air cleaner. It has the same 2 1/4 outlet as the...

I don't know what exhaust system you have, but anything that is even vaguely shaped like a drivers side 68-70 340 manifold those would not work with - wires need to stay higher then drop right down to the plugs. I have seen various header routings that stay above the head ports that would have...

My Eddy hits the head on drivers side. I bought a head to manifold 1/4" spacer. Worked out great.

My drivers side ex manifold I tried would hit the steering box. how did you get around that?

Searched on this forum and elsewhere but haven’t seen anyone have it fit this close/bad. I did trial fit the engine to the k frame multiple times, and ended up trimming a lot for the oil pump per the instructions. The problem is the back of the oil pump is touching the mount or near touching...

Left side will hit with 64-66 LH or Drivers Side exhaust manifold using 73? up LA heads with the air boss. No problems with 67 up manifolds. Magnum heads have the same small exhaust port and do not have an EGR air port so they should work with the 64-66 exhaust manifold as well.

The passengers side '71 340 was more restrictive lower flowing then the '68-'70 pass side. '71 drivers side flowed as much as the earlier ones.

...A, B and E bodies, but the drivers side is specific for A body cars. The only difference between a 68-70 drivers side 340 HP manifold and a 72-76 340/360 drivers side manifold is the later ones have bolt bosses cast in to hold the heat stove that the heat tube going up to the air cleaner...

I always put the passenger side manifold on before I put the engine in the car, the drivers side goes in afterwards, or I have to put it in from the bottom before the torsion bars go in...

Howdy peoples! I have a 68 340 motor that came with only the drivers side manifold. I’m trying to identify it, but the casting number doesn’t show up in my books. A fine young gun is looking for a drivers side manifold for his 69 Dart project, he’s putting in a 5.9 magnum, and I told him I would...

...any experience with using OEM cast iron manifolds with edelbrock aluminum heads? Apparently, according to edelbrock installation manual the 2863553 (68-70) drivers side manifold will not work. Will the 71-73 year drivers side work? Also would the exit port be the same size on a 71-73 vs the...

do we know if a drivers side 340 exhaust manifold heat shield will ever be available again. Julius

That will work too. Good thing you found it.

I agree and I’m with Dan on this. I’d also say no matter what test is out there saying how great they are, I’d only use 340 exhaust manifolds is if I had a set collecting dust on the floor. The MP book suggests using one 340 manifold on one side and a Magnum manifold on the other side. At...

I fit an early 340 exhaust manifold on the driver's side by switching to a power steering column and using an adapter (Firm Feel, etc) to hook it to the manual steering box. That put the joint far enough back to clear the manifold. I ran the outlet pipe between the torsion bar and the frame...

Good progress, sounds like. Surely you aren't gonna sell the early A drivers side V8 manifold?!?! If your luck is like mine.....i'd sell it and next week mine would crack. :eek:

Ok, been in the garage. Balancer still at 20, #1 still coming up on comp, rotated the dist gear one and two teeth, back to one. The dist hold down is in the middle’ish of the adjustment and the rotor is facing forward/drivers side, and the rotor is on the #1 mark that I made for the cap.

1969 abody 383 drivers side manifold #2946729 in excellent condition. with head pipe section....$800 or trade for 1971 abody rally cluster in excellent condition. Not a 1970 one with thumwheel radio but a 1971 with round know for radio and no cigarette lighter hole on far right...I already have...

Hi iam in need of a drivers side exhaust manifold for my 65 Dart part number 2465847 if any one has one for sale I will gladly buy it or the set. Thanks So Much

This is a nice manifold.Will glass bead up nicely.Appears to have a late `70 cast date...$30.Keene NH.US postal money order only.Nothing else.No acceptions

...from the slant trans. One more thing to watch for if you swap to a later 318 and use the 65 exhaust manifolds. Mock up the drivers side manifold to the motor before you put it in the car. The early A drivers side manifold will hit a bump on the bottom of the later heads. It's a danged if you...

Hard to find. Have this left over when I had a 70 340 drivers manifold, and a r/t 360 Dakota on the passenger side. I think it will fit in a small flat rate USPS box at $8 $15 for the flange plus 8 to ship

...of TTI motor mounts for my Duster. Got everything bolted in. Happy so far with the motor mounts, but attempted to bolt in the drivers side manifold I got from a 2015 jeep grand Cherokee, due to not wanting to drop another grand into just headers. I’ve got the engine up enough where the...

I show casting # and casting date.This is not riddled with pitting.Will clean up nicely.$50,shipping extra..Keene NH.US Postal money order only.Nothing else will be accepted.

I didn't realize the drivers side was the same - I would have sworn I saw pictures and they looked different. Now if I could find a 340 HP passenger side that wasn't priced in Troy ounces like gold ... I *DID* find a passenger side 340/360 standard manifold from an older gentleman going out of...

Drivers side Part number shows this is for a 71-73 Dart with 318 (also fits 340j, but will fit other years. date code is hard to make out. Looks like 823. The 2 isn’t super clear. $75 plus shipping from Wisconsin PM me here thanks

Here are pics of the dates And I also have extra drivers side manifold in another for sale post.

Have a friend who wants to sell his factory ultra rare 383 HP manifold for the drivers side of a factory 383 formula S car and probably the 383 and 440 dart GTS’s too (I’m not 100% sure about the darts but ito me it stands to reason). I’ve had my hands on it, no cracks or damage, will clean up...

I have not posted much and I am not sure what the hell I am doing, but that is the way I have went through life. so here it goes. I have some pictures some might find interesting. the car was raced at fremont dragstrip in california, wrecked the drivers side quarter panel then stored since 1979...