Search results for query: *

Easiest quickest solution. Agree with use of copper as a backer. I buy copper pipe from local hardware store, slice it, open it up, and hammer flat. Cheap, works great.

I always flag tricky issues, press forward, keep going, and circle back. Every project always unexpected difficult issues to over come. Situation normal.

I would hammer dolly inner fender in and move forward with build and sleep on what if anything else to change/modify. A lot of times punting sleeping on it circling back you gain a better perspective over time.

Put a a Flow Kooler on my small block stroker aluminum heads. Its been on there for 15 years now lots of high RPM pulls. Recored 3 row original radiator (factory AC car), mopar performance clutch fan, high flow thermostat. I can sit in traffic with AC on in 100 degree heat no problem at all.

I was standing at starting line when they ran at Cecil County. Yes track officials sprayed the track down with sticky stuff. Track was continuously cleaned too. When officials saw FAST cars about to stage looked like they sprayed a bit more sticky stuff on track from what I saw.....

Me in the background by the fence. Second from right dark blue sweatshirt blue Summit Racing hat. Was amazing to watch it.

'71 Duster runs a 10.1 1/4 mile breaking the Factory Appearing Stock Tire (FAST) small block record at Cecil County Dragway today.

If one mix came out too light and one too dark maybe mix up a cup of 50/50 each and do a test spray out? Agree will need to blend into doors but looks like a better match is needed first. I been told white, grey, or black primer underneath can influence it slightly.

I bought full Level 2 kit from US Car Tool but only put sub frame connectors in so far....

I had to pull heat AC boxes out of mine to fab up custom trans tunnel for a T56 Magnum 6 spd. Once heat AC back in only 1/8 clearance between heat ducts and tunnel had to squeeze carpet under there. Those factory AC with heat ducts close to trans tunnel can present a lot of challenges for the...

Yeah my Borgeson delivers on that modern car no slop steering feel. Its impressive.

Shot one coat of PPG epoxy primer let that sit 45 mins then one coat Nasson single stage. Harbor Freight detail gun 20 PSI at the gun. 1993 Mustang LX 5.0.

I popped front off mine by accident and it snapped back on. Its a reproduction. Sounds like the bulb socket is supposed to be pulled out from the back side?

Take a flat blade screw driver and pop cover off. Then you have direct access to the bulb.

So if I click on link in post #30 forabodiesonly site gets a kick back? If so thats a good thing help keep site up and running.

For exhaust leaks a few feet of 3/8 hose, one end to your ear, other end move around exhaust. You can pin point any leak or confirm no leaks accurately.

Over drive trans is best mod one can do on these cars. Can have off the line acceleration AND low RPMs on highway both no compromises.

One thing I think is worth mentioning is make sure you have high flow air hose couplings. Otherwise paint gun won't get enough volume to atomize the paint and end up with rough texture. I have done several cars for my kids and I do all the rust dent repair, body work, block sanding and get the...

For the folks that want orig style AC parts they are getting increasingly hard to find.

I have Randy Ring & Pinion 489 center section in my car for about 20 years. And last 15 years stroker engine and now 6 spd manual trans. I change gear oil regularly to help it last.

Brewers sells the console carpet: 1966-73 A-BODY 4-SPEED/AUTO CONSOLE CARPET STRIP - Mopar A833 4-Speed Transmission & Component Specialists

8 speed auto is gonna be major improvement. Looks like 2.73 gears for Ford 8.8 available new if you decide to go that route. Fox body guys swap those out and throw them in the trash.

I was able to get my wiper motor out and back in with dash and heat AC box in place years back. I think I unbolted motor, pulled back, and spun nut off shaft and left lever connected to linkage. Wasn't very hard to do at all.

Car looks awesome. Good luck on the trip.

We're lucky we even get 190 cc heads....

Rust free trunk floor looks amazing

Can it spin tires with that 408?

Yeah who needs a Honda Challenger when the new EV Charger with fake engine sounds is on the way.

Pictures of that '69 Barracuda?

Several ppl on this forum have done the electric steering conversion. The electric assist is hidden up under the dash and it retains the stock manual steering look under the hood.