Search results for query: 318 cam

Just wanted to share the slow build of this 318. I know there are plenty of people and articles saying you can build this or that on a low budget, and we all love the idea of a cheap budget engine build. But the truth may be if you are buying a used engine that is not running, you going to find...

Personally and in my experience I cant see seeking out 318 parts (302 heads) the natural progression that I went through as a young man is play around with the 318, cam, headers carb exhaust, ran good but want better ... seek out and find a 340-360 ...that is the natural way of things not...

Hi everyone. So just got my 73 Dart Swingers 318 block back from the shop. Had it bored .30 over to match the new high performance KB Pistons I bought. Had the stocked heads worked on as well (valve job..resurfaced ect.) Using Stock crank.. Will be changing the 2brl to a 4brl edelbrock..Adding...

Not much different at .425 lift, but less false motion. I pretty much run them on everything. But I don't run anything but a 4 barrel carb and rev to 6,000 rpm. When you use good parts, longevity is a non issue in my experience. Most of my engines last forever with oil and filter changes at...

honestly, if you're going to build a stroked 318, I'd start with an '85-91 block. they have factory roller cams, 302 heads. the roller cam is the biggie. you can get it reground, or get a roller cam and reuse the stock roller lifters at a much lower cost than the retrofit roller lifters...

2001 to 1996 DODGE RAM 5.9, 5.2 High Output Intercooled Tuner Kit with P-1SC 1DA202-SCI - thesuperchargerstore.com Small Block MOPAR & LA 318-360 – Single Charger | TorqStorm This would be my route in the quest for 500hp with what you have on the engine now, IF you don't have hypereutectic...

Posting for a couple friends of mine that are not on this site. 72 Dodge Dart 318 with mild cam New Tires and Wheels New Interior Custom Console Mini Tubbed Asking $25,000.00 OBO Contact Paul @ 574-310-4397 Barry @574-993-3114 Located in north central Indiana Tell them Randy posted the ad.

The 365/375 horse 327 had a cam in this range. Speed Pro still sells it. Put it in your 318 along with a nice intake and carb and some headers and see where you go. I bet that 327 had 10/1 compression at least which the 318 lacked. A 300° cam is pretty nasty especially in a small cube engine...

That looks like a DEAD stock 2 barrel cam. Is that what you want?

The gain from using the 2.02s out weighs the comp loss i did it with a 68 318 street hemi cam 2.02 j heads torker 650 dp nitrous Had more torque then a 440 375 is cheap if t was rebuilt right speed master heads is the way to go

My setup is stock, 318/904/stock coil. modifications include Airgap, Holley 750 vacuum secondarys, Tti long tube headers, comp cam, Accel brass cap, Accel 8mil wires and Blue streak points. Going on 10 years without any issues.

Depends on where you close the intake valve. As always run more comp.....

THere really isn't much difference between the LA and Magnum other than the Mag has a little better heads than a LA Teen and of course the roller cam. You can get the same benefit from a 85 or newer Roller cam Teen block. I have one in the garage and some Speedmaster heads in the basement. I...

if you're going to delve into machine work, then you're into the 360 paradox. why spend that money on a 318 when you can make more power, easier and cheaper with a 360. and if you're gonna zero deck it, then why not get some decent pistons? something that can take spray or boost? as they say: in...

Nothing against research. See my 318 cam thread posts. I do agree there is certainly a wide variance in consistency with respect to seat of the pants power and torque from 318 engines.

Well I got off track but I agree, the logic minded 318 guy will eventually realize that performance with a 318 isn't impossible its just more logical the the 360 . I agree that, a 318 will sound good with a cam but those down in the hole pistons and sub 4 inch bore leave much to be desired...

ok, then i'd go 4" stroker for 395 cu in and decent ally heads. that 318 ran a 13.2 1/4 mile in another 68 valiant also with a 4 speed. neil. edit the 600 holleys got swapped for 390s by mark who bought the valiant from me. neil.

I now own the magnum crate engine Holdener was using for testing. With the 212/218 cam and an rpm air gap it now makes 365.

thats basic 318 hotroding right there! im building one closer to this one, but different cam, some home porting...DWB https://www.motortrend.com/how-to/mopp-0409-318-engine-build/

Keep in mind the factory 318 valve springs aren’t suitable for pretty much any aftermarket performance camshaft …….especially if they’re 50+ years old. Any cam swap should include a spring replacement.

The above video is about him maximizing his 318 at a minimal cost, and utilizing his original valve train to work with the new cam grind numbers. Not "You Should Drop in a 360". 318 ^^^ ☆☆☆☆☆

Cool I don't have the answer to the original question on cylinder walls @toolmanmike @RustyRatRod @Tooljunkie

OK, I just gotta know why? In 54 years of hotrodding, never once did I swap to a slanty, lol. Altho, I did rebuild a few. If it's for fuel economy, that's almost a myth. I'm pretty sure that I can get better fuel economy out of a hi-compression, modest cam, overdriven M/T 360, than any...

If Jim's thread doesn't support this 340 making more than 300hp if everything was in decent shape, not sure what would convince folks. @PRH Had a 360 with a 214/224 cam. Car ran high 11's at 3000# Sounded like grandmas 318 Duster.

Get some numbers off the block and heads. Because it's blue, it could be a 72 or 3 with low compression, cast crank, small cam, and small valve heads. . Heck, it could be a 318 and without looking close, you wouldn't know. It's a core.

So a stock 318 with bolt on parts. Yeah gotta have that MSD. They too have failure rates and some of them are quite frequent.

Sir, I don't mean to sound disrespectful but read what I said and you'll see that I was asking if it's to much cam for the 318 that's being discussed that has a 9.2:1 CR. I didn't mean or say that it's too much cam.

It's kind of considered middle ground for a street cam, above this level each step up you generally tend to start really trading bottom end power for top end power and gears stall starts to become more and more necessary. Obviously not set into stone.

Hello All, I am pretty sure you can do this but I wanted to ask to make sure. I have a 318 non magnum hydraulic roller block. Can I install a regular hydraulic cam and lifters? I have everything for the flat tappet. Cam, lifters, timing chain and pushrods to match. Using an electric fuel...

At 6200ft I’d throw a stock 318 cam in that 360.