Search results for query: 66 barracuda

I'm not good with pictures, but I need to learn. Got a bunch of parts I need to put up for sale. If your interested older video on you tube of my Valiant and Barracuda. 66 Valiant 225 slant NA. 66 Barracuda 170 on nitrous. Valiant at time 17.27 Barracuda at time 19.55, 20.58, and 24.05

Just ask the question in the body and trim forum. I know 66 Darts are different than 63-65. Barracuda could be the same but very well may be different. Once you find out what fits, then you can ask for parts.

Well written! :thumbsup:

Brewers has a kit to allow the usage of later aluminum bell housing in the 64 - 66 chassis. Contact them.

If going to a floor shift is your only goal, then get a '65 floor shifter and cables. Otherwise: Locate a '66 or '67 904 (must be from a smallblock if that's what you have, or a slant 6 if that is what you have. They are NOT interchangeable. Later '68 and up 904s use a convertor with a larger...

...Plymouth. Some of what you are seeing are aftermarket aluminum intakes (primarily Edelbrock) but "Dodge Parts" are not aftermarket.... Hell, my 66 Barracuda 273 4bbl came with a Charger 273 Air Cleaner...at delivery. Not unusual as it was made on the same line with Darts at Hamtramck/Dodge Main

I did the exact same mod on my '66 Barracuda except that I didn't take the fuel gauge apart (as in pulling the face plate) but instead, I drilled a hole in the gauge housing to get access to sterilizing the voltage limiter. I posted some photos here somewhere a couple of years ago. Test to see...

Nice 66 Barracuda! 65'

...in 65. That includes the floor and the inside of the quarter panels. My original white 65 Barracuda had a white painted trunk. My gold 66 Barracuda had a gold painted trunk. The plastic latch cover in my 65 was black; the cover on my 66 was gold (not sure if it was gold to match the...

I have for sale the in dash controls from a 66 Barracuda. I purchased this for a car that has been sold. Please take a look at the picture and if you are interested contact me here. If you want the part I will boxed up the part with your name and address and take to the post office so I can get...

I notice the plastic latch cover is gold in the attached picture, was the interior gold from the factory as well?

Try Dantes Parts they are cheaper then Legendary I have a 66 and just ordered front covers I was told 10 weeks. legendary is like 40 weeks out Joe

I own a 66' Barracuda and I want to switch those old drums into all around disc brakes. I was looking into buying a set kit, so that I can put it in myself. Most likely power instead of manual with the booster. I found this kit, that seems to be the best option at this point. Do you guys...

Same bracket as the early (64-66) 273s. That's why there are two sets of holes to mount to the head. You'll notice that the two lower holes are used on the wedge. (This bracket may have been used on 318s and 340s after 66, don't know. Mine is now on the 340 that's in my 65 Barracuda.)

15x8 with 4.25” backspace and 235/60 drag radials rubbed on my 66 barracuda, 8.75 rearend. I’m also not lifted in the rear. My springs are moved inward 3” so I plan on buying a set of custom billet specialties rims. 17x8 with a 5.75” backspace

Me as well, lap belt over a 66 Barracuda buckets.

My next project HAS to be putting the 340 into my blue Barracuda. Now that Nellas room is finally done, I can turn back to doing stuff with cars. I wish the Signet would find a good home, I need the space, and the money would be nice too. Although it’s a really fun car to drive. Come on down and...

front sway bar and k member mounts

Are those gas shocks..?

Just wanted to introduce myself, I am a car nut, and have several classics including a 66 Barracuda. I enjoy reading your posts, and look forward to getting and giving advice whenever needed. Thanks for letting me join!

I saw an engine on a 66 barracuda formula S at the Indy Mecum auction last week. It had 2 hard plastic trays that sat on top of the drivers manifold that protected the spark plug boots from heat. Has anyone else seen these or know where to source them? I've never seen them before. I should have...

Now that your going I have a question for you or anyone who reads this. I'm having a lot of problems finding a 8.75 rear that fits my 66 barracuda if you or any body else has any leads on one I would like to hear where I can buy one. I will rebuild it so I don't need a new one just one that will...

How do you like the 391 gears? I was thinking of putting them in my 66 barracuda. I have a dyna rear I'm putting in it. I built a 360 magnum motor for it pushing 470 hp. It was a tight fit. Had to go serpentine belt change and a different ps pump.

My 66 Barracuda is being redone and I am working on the instrument cluster. Roger Kizer (@RogerK ) mentioned in one of his YT videos about melting the plastic pins when disassembling the plastic cluster for repairs adding a little new plastic when you were reassembling them. I had rust between...

245 50 16 in the rear. I have disc brakes in the rear and I believe I have Moser axles that are .125" longer so effectively my back space is 4.875" when compared to stock. I found a wheel that got me as close to the leaf spring as possible and clearanced the tire with a fender roller and a...

Been there. The plastics used in car models work great.

Anyone had luck with repairing the fender mounted fins when the post is broken? I have a good set, but would like to have backups as no one appears to be making repro at this point. I have a broken one and before I started trying to cobble a fix I thought I would see what others have done first.

66 Coronet 440 318/727 83/4 sure grip original except for repaint in 80’s/90’s runs and drives good very solid southern car not a show car Looking for 67-69 Dart or Barracuda also consider 70-73 Dart/Scamp Thanks

Procar doesn’t make seat brackets for the 65 Dart, but they do for the 65 Barracuda. Will these work for me? Anyone installed procar seats in your 63-66 Early A?

Parting out a 66 with an automatic console column. Will this fit a 65?