Search results for query: *

Yes, I noticed that too. I guess the car is one of one with p code 9, he he. Thanks guys, I guess it’s sorted out.

If my memory serves me right I believe there were fendermounted mirrors on the car when I bought it 1975. I replaced the front fenders with fiberglass fenders. The original fenders were rusted out and the passenger side were dented bad. The fendermounted mirrors could have been installed here in...

Here’s a pic of the fendertag. Long story short, I used to own this car back in -75-76. Sold after a while and bought it back in around 2007. It was sold new here in Sweden by SAAB ANA who had the dealership by the time of the 60:ies. Traded with my son for a motorcycle at 2017. Now I’m fixing...

I’m not sure of what you mean GT?

Looking at the fender tag for my sons Barracuda -66. There’s code p 9 small letter, I’ve looking for what this stands for but haven’t found anything. Any of you guys who can help us out with this one. Many thanks in advance Swedefish.

Another pic. Thanks in advance Swedefish/ Lenny

Had a look at the rear sensor, looked okey no dirt just oil. Showed 1.88 kOhm on the digital multimeter. Removed the front sensors and they looks as the pic, the one on the drivers side was bent on the “tip”. Had it corrected and put it back, made a short test drive and the abs hasn’t been...

Thanks guys, then this one’s definitely homemade compared to Halifax’s pic. He he . Should fill its purpose anyway, I hope.

I’m helping my son with restoring his -66 Barracuda. Lots of rust, so far I’ve replaced front framerails, part of torsionbar frame, front floorpan, front leafspring attachment both sides, parts of the floorpan under the rear seat both sides, part of inner wheelhouse and wheelhouse openings both...

Thanks guys, haven’t done any troubleshooting yet. I’ll look into the rear sensor, I assume that I should be able to get some kind of reading when I check for continuity? The vehicle will not past the yearly inspection if the abs don’t work. Thanks again guys /Lenny

Any of You guys who know if the abs wheel speed sensor are the same for 2 wd as for the 4 wd? Have been searching but haven’t found a sensor for a 2 wd. The abs is activated randomly at low speed. Many thanks in advance Lenny

Sorry, haven’t been in at fabo for a while. Unfortunately the seat covers was cracked and the guy who did the upholstery didn’t ask my son if he would like to have them back.

I’ve had two of these helpstarters, works like a champ. The first one I had (which ended up in the water while it was laying on the floor of the wifes convertible) was a 700 amp and I was able to start my Dakota 5.2 6 times without recharge when the battery failed. I did buy this Noco 1000 amp...

Thanks for posting,

Yes, looked it up in the shopmanual and you’re correct.

Thanks Mark, I’ll probably order from Laysons.

Long story short. Bought back my first car some years ago (-66 Barracuda) and I traded it for a motocycle with my son. Now I’m helping him with restoration of the car. There’s quite a bit of rust on the car so there is were the work is in progress at the moment. Since we are switching the...

Thanks for all of the replies guys. I’ll shop around to look for the best option. Swedefish

Anybody who knows if these caliper piston will fit -66 KH 4-piston calipers? Scott Drake C5ZZ-2196-A Scott Drake Brake Caliper Replacement Components | Summit Racing Many thanks in advance Swedefish

Been following Make it Kustom for a while. Learn something in almost every video.

Thanks guys. Yes, l’ll try to clean things up to try to locate the leak.

Hi guys. We have a problem with the wifes Sebring/Stratus 1999 2.5 l V6. It got a severe fluid leakage somewere. It’s very hard to judge were the leak comes from. One posibility could be the power steering pressure switch. Does any of you guys experinced a leak from/thrue the pressure switch? Is...

Thanks, 4spd. //Swedefish

….wind vane. Home made, only downside. It have to be near storm to make it ”run”

For what I understand the BO cars where buillt on the H-code cars? if so it should have rear torque boxes?!

I would use it as a cruiser for the time being and tinker with it when time alows, as I understand that it is drivable? Except for the fuel leakage that got to be addressed. Too nice of a car to sell, I would regret it for sure. Swedefish

Some pics from a car show back in-76, show were called Hot Rod Show and took place in Stockholm during the -60 and -70:ies.

Wasn’t there a member on Fabo who buillt a D Modified production Dart?

Sure do miss Bill, a big loss for this world.