Search results for query: *

Do you mean 4.5 bolt pattern or 5.5 ? If they are unilug the normal bolt pattern is mopar 4.5 and gm 4.75. If yours are really 5.5 then no they won't fit.

I just replaced the one in my Barracuda this summer. I had the same problem as you. I contacted the manufacturer and was told that this is the way they are making them now because it also fits up to 1976 with two different size hoses. I changed the fitting to the smaller size along with the...

Thank you very much. That is the original color of the car, A4 silver metallic. It came from the factory with pin stripes but after it was painted in 2007 we decided to go with the formula s stripe. Bobby

You might have paid for six and the clerk forgot to take out two plugs.

Plugs were packaged in boxes of eight. Most manufactures now package them in boxes of four as Kim said but NGK has some numbers in boxes of ten. You can buy as many or as few as you want. I worked for NAPA for 46 years and we always sold whatever quantity the customer wanted. Bobby

I bought a tach for my Barracuda a few years ago from Year One. Can't tell you how accurate it is as I never checked it against another tach or a multi meter. It did fit fine and works great. If I remember correctly it was around $ 300.00 Bobby

No problem glad I could help.

That would be for the battery cable where it goes down to the starter.

I have a program sending you a pm.

Happy birthday young fella. Don't celebrate too much. Bobby

I'm almost positive Dart/Scamp rear bumpers have a different profile than DEMON/Duster bumpers. Check the part numbers on yours to see exactly what yours fit. To me yours look like the Dart/Scamp version. Bobby

I installed one on my 1969 Barracuda and can't see anything out of it. I used the measurements from the driver side. I was told after the fact that you have to pivot the mirror in in order to see out of it. Had I known before hand that you had to install it crooked would I have done it, I don't...

Found

OK Where would I go to do that?

yes thanks

We found a working a-body 3 speed motor from national moparts in Ontario, it's on the way. Thanks to everyone. Bobby

We found a working a-body 3 speed motor, it's on the way from national moparts in Ontario. Thanks to everyone for their help and suggestions. Bobby

I thought that in 1970 the three gauges on the left were separated and round as well as the one on the right. Bobby

CFD244 I will get my service manual and check. CRUZE 418 is that an aftermarket air cleaner

OK thanks. 4spdragtop has one that he is checking for me tomorrow. He is much closer and canadian dollars so I'll wait to hear from him. I will let you know if Steve's doesn't work out. Bobby

I believe 3431739 fits 1973 models.

I had a 270 model with the letters. I don't think you could have the letters and the stripe at the same time.

Hi Looking for a working 3 speed wiper motor with wire harness to plug into the bulkhead connector. This is for a 1973-1976 a-body, not sure if the earlier 1967-1972 a-bodies are the same. If someone has one you don't have to worry about cross border shipping as I have a mail box in Calais...

I spoke with a couple of local mopar guys this afternoon and it looks like we need an a-body wiper motor unless we want to modify the harness. Sorry I was saying junction block but I should have said bulkhead connector. I also left out an important piece of information, the car has a 6 barrel...

Steve I looked at M&H and Evans. Evans is probably our best bet if we can't find a parts car with everything still in it. Thanks for your help. Bobby

Thanks townsend. That makes sense. I think he got the 3 speed motor from a fellow that has a Cordoba. Not sure what the switch comes from. It works now at one speed with a jumper wire but we want to hook it up correctly and have all speeds working. Thanks for that info.

I checked year one and they only show 2 speed motors and harness. Aaron We do have the service manual and making a harness will be a last resort. Steve I am not familiar with M&H or Evans but will check them out. Thank you both for the help.

I think we need an adapter to join the two plugs but I'm not sure. That harness from year one looks like the same harness that came on the car with a 2 speed motor. Never thought to go look at year one, I'll go check . Thanks Aaron

OK. Here are the pictures. The first one is the original harness which was plugged directly into the 2 speed wiper motor and the other end is plugged into the junction box. The second picture is the harness from the 3 speed wiper motor which is too short to plug into the junction box and also...

I think the linkage was on the motor when he got it and it hooked up to his transmission fine. I'll go to his house and get some pictures. Thanks .