Search results for query: *

Here is a picture for you. As prices go for the HDK (That I follow and learned a lot from)versus doing a 73 K frame set up with all the goodies in my new project 73 Duster with 6.4 Gen 3 Hemi. The Parts end up just as much if not a little more than the HDK set up. I follow 72bluNblu and leaned...

Crazy, it’s the first time I’ve saw something like that happening.

thank you for your patience and not giving up on an old man... I appreciate it

good to go!

I’ve sent one to you before. On Jan 4, 2022 PM to get your email I replied with the instructions attached again to that email from Jan 4, 2022

I just checked it and I got 6 and 40, thanks for the explanation.

I has a 76 dart sport with a slant which I daily drove for a couple of years in the 80s. Then I got a wrecked L code 360 4 gear. It had buckets and a factory dual snorkel. I still have it but it is rusted all to hell. Kim

Not flat, got bumps. Just gonna order a rollmaster

That gets you the 226 number above at .050 of tappet lift. It's not the moment the tappet lifts. zero out the indicator when the lifter is on the base circle, get it to .050 lift, then look at the reading on the wheel. Should be at 6 BTDC on the way up and 40 ABDC on the way down and hit...

my apologies on how I described it in the first post. And please bear with me on my next question. When you say “6 and 40” , are you meaning the moment of lifter lift to open valve and the moment of lifter stopping or valve closed added to 180 which will equal 226 duration?

Motor's in: Pretty sure that engine bay has been empty since 1984. Also been awhile since I flew solo on an engine drop but hell yeah I still got it :D Sits higher than I thought it would even tho the mounts are all the way down in the frame so I'll be looking for a low profile air cleaner...

It`s been doing that for months on my PC :realcrazy:

The flange is less then a 1/4 inch from the floorboard. The Dougs headers are very small. My primer tubes I bet are almost the size of you exhaust pipes. My headers are 2 1/4 with 4 1/2 collector. The car was built to have 70’s style look, with rear tire size 390/45R15 but when I get over...

If you had mentioned using max lift clearly in the first post, things go different. The .050 value is used plenty to get ICL. Tappet lift off base, either side of max lift. Even after doing that method, it's a good idea to go back and check the tappet lift numbers, in this case the 6 and 40...

Stacked in your favor

Sumthin sent from Idahohoho https://www.nhra.com/news/2025/tv-schedule-enjoy-nhra-fox-drag-racing-highlights-through-january

Vernon County.

In case you get tarred of waiting for the Gators https://www.nhra.com/news/2025/tv-schedule-enjoy-nhra-fox-drag-racing-highlights-through-january

ah, are you guys in luck. i was gifted 400 dad jokes. 1.why did the turkey join the rock band? because it had drum sticks. 2. how is a baseball team similar to a pancake? they both need a good batter. only 398 left to go.

Yes I did it just like the video showed what to do

Thank you Thank you Thank you, yes that is what I was trying to describe....

He is just trying to check installed centerline. I think he is referring to .050 as the degree wheel readings .050” on each side of his max lift. He is not talking about the cam duration.

No advantage, plenty disadvantage—chief among which is if the regulator fails, you don't get to just replace it in five minutes wherever you happen to be with the spare you grabbed out the trunk (or bought wherever). No, you're stuck until you replace the alternator. There are worthy alternator...

Nice, definitely would be nice to know the history on the car. Great build. 65

thanks I will look at this and see what I did wrong

The LSA is 111 says Lobe center line: 107 The 107 is what I was adjusting for! Was I supposed to adjust to the 226 \ 2 = 113 ?