Search results for query: *

That's what someone else told me, the 4 speed and bellhousing in my car came out of a 70 demon. I bought a new one and tossing that one bracket out.

My car is a v8 car originally a 3spd swapped for a 71 4spd. The ball is kinda worn. So I want to get a replacement part just want to make sure that the extra part of the bracket doesn't have an important use.

Took a look at that and looked up the part number the two bolt hoes and the ball locations are the same, though I haven't seen any with the extra part to the right. Is it for the return spring?

I have a 74 Dart Sport 360 and have been doing a lot of work, planning on rebuilding the clutch pedal linkage it's a bit screwed up. The plate I have attached to my bellhousing is the same as this picture, is this correct for an a body? I can't find anything online except for this one photo, non...

All 73-76 A-body seats are the same. I would adjust your title.

Thank you for the complete story. I'm 22 and I have a lot to learn about all this stuff. But now that I have a full fledged answer I'm confident in the engine swap. Id assume the bearing is the better then the bushing?

Hey I'm looking to magnum swap my 74 dart sport. Getting a lot of confusing info about this swap. Looking to confirm info and or be corrected. I am using a a833 and bell housing from a 72 demon. I plan on ordering a 360 magnum crate engine I talked with builders and they said it's a stock...

I have a new never used 22" champion radiator my current project has an opening for the 26" it's a 360 car. Looking to see if anyone has a 26 they'd be willing to trade. If not I'll make it work lol. Has a Mopar "m" painted on it. Located in Trevor Wisconsin

Sorry got busy, do you take PayPal?

Solid core motor 74 360 block and crank. Has pitting in cylinders will need a bore job. Otherwise a is good to go. Has all main caps. Asking $100 local pickup only. Taking up a lot of space, might make a table or scrap. Location is Trevor Wisconsin 53179

I have a bumper from a 74 dart sport, minimal pitting, driver quality. Asking $50 local pickup only. Trevor Wisconsin 53179

I have a dash frame from a 73 duster. Local pick up $50. Local pickup only. Will be scraping if no interest. Trevor Wisconsin 53179

Do the seals have one or two ends on it?

Door hinges or door seals? Ad is for both. I got the door hinges.

Same for what?

Just need the door seals, found new hinges for very cheap.

I'm looking for a set of door seals for a 74 Duster. I'm assuming they are the same from 70-76, but I'm not sure. I'm looking for driver-quality originals; repos don't fit right. I'm also looking for passenger door hinges, but I would also buy a driver if sold as a set. Located in Trevor...

shipping to 53179 Trevor WI?

For sale/trade is my 1974 Dart Sport 360. Currently a non running project. An original 360 3 speed car now has a 4 speed out of a demon. Engine is currently taken apart and out of the car. I have two blocks for it a 74 and a 78(what was in the car when I got it). I have a six pack intake, new...

I have a factory 74 dart sport factory manual car. The original steering column was removed from the car and isn't a solid unit. The bracket that bolts to the firewall is not attached and I have no clue how it was originally. And the steering shaft has nothing keeping it centered in the column...

Good morning, I have a 74 dart sport that came with an 8.25 I put in a 8.75 and installed disks on it. I'm just a little confused on how I'm supposed to run the rear parking break cables. They are the gm style calipers.

From what I've inspected all the parts are good so unless someone else has input I'll guess I'll have to dig up a manual

I have a 74 dart sport and I have had this issue with no solution. My drivers window has play between the fabric trim that's screwed to the actual door and the interior trim. My passenger doors gap is super tight and has no play while drivers is like 1/4 to 1/2 and if I max out the adjusters up...

$175!!

i have one with the clutch, pm me if interested. I can get you the PN

I have a nearly complete dash out of a duster. Has cluster. woodgrain trim, aka not base dash. it's missing the heater controls, dash pad, and cig tray. All the gauges were fully functional, and all lights worked, too. Was painted black originally tan. Also included is a small box of extra gauge...

I have a 74 dart sport. I would be fine with a 69 and older. Use the ignition spot for my choke. 70 or newer is good too

Located in southeastern Wisconsin 53179

I'm looking for any year ralley dash frame. Was going to convert a standard to fit the cluster but with school and work not enough time. Seeing if anyone has one before I jump in and attempt to do it. Looking for a black one but will repaint if necessary.