Search results for query: *

I sold my 67 fastback and have a 1994 360 magnum with all wiring and computer. It was in a church van and ran great with 84,000 miles when I pulled it. The body on the van was shot. I kept everything even the speedometer,not sure why. I was going to use it in the 67 with fuel injection but had...

1967 fastback 273 ho,904 auto all original drive train(motor needs rebuilding) sold in Kentucky and last driven 1990. very solid body and frame. the windshield was out and i had to have two small patches near pedals on both driver & passenger side. new rear quarters, new gas tank & sending...

I need trunk extensions for my 67 barracuda fastback. Does anyone have photo or dimensions so i can make them myself? Thanks stan

I have a 67 barracuda that i took my friends word and sent it to his buddy for welding. He did a lousy job but worse that that he destroyed my orginial 273 ho that came with the car. The car sat in his garage with the hood off. His roof leaked and he didn't have sense enought to cover the...

I have been going through so tough times since the middle of april. I have had 4 back operations, the first in 1969 when i was 21. I now have rods and fusion and no dr can help anymore. I have been in unbearable pain for the last 2 months. I love to keep busy and i can't do anything. My...

i still need the rod that connects the floor shift on my 67 barracuda to the 904 trans. if no one has one does anyone have a photo of one so i can see what i am looking for? the part was missing when i bought the car. thanks stan

I need the the linkage for a 67 barracuda from the floor shift to the auto trans. If anyone has this part please give me a shipped price to 49755. Thanks stan

I need a new gas tank for my 67 barracuda fastback. As for now i will be running the original 273 commando. I have a 360 and a 340 that i may be using later. My question is should i get the 5/16 fuel sending unit or go with the 3/8. I found a good price on both but i am always open to...

Is a od trans out of 6 cyl as strong as a v8 trans? I have a chance to get a good aluminum for $100. I would use it behind a stock 273 235 hp. Thanks stan

My 67 fastback has a 904 and a 7 1/4 rear. I plan to get a 8 3/4 but will have to use the 7 1/4 for now. The drive shaft was not on the car when i bought it. I need whatever is used to bolt the drive shaft(universal joint) to the 7 1/4. I am not sure if these are u bolts or what. These were...

Can anyone tell me how to get the rear interior side panels off my 67 fastback? I took out all the screws but they still will not come off. I want to repaint them and i could a much better job if they were off the car. Thanks stan

I just got some parts off a 67 barracuda notch back. I got a very good steering coloum for floor shift, the steering wheel is fair but the horn ring is very good, very good front wiring harness, nice jack with cardboard spare cover and all hardware. Also the upper and lower trunk trim in fair...

I bought a 73 340 short block with a small chip out of the inside of #4 cylinder. I had a couple of mechanics look at it and they think if i hone it i can rering it and it will be ok. Time will tell. What compression were the 73s and is the stock cam a lot milder than the one that came with my...

I just found a 340 short block # 2780930-340-2. It has a small chip at the bottom of the cylinder about 1/2" by 3/4". The crank looks good and the bores look smooth. It is 30 over. Can it be fixed? He wants $300. But his dad said he would take $250. Can you tell what year by the #s and is...

I had a complete knee replacement on march 23th. I got out of the hospital last friday and it seemed i was doing good. Every day it gets worse instead of better. Even with heavy narcotics i can hardly stand to move it but if i don't exersize the operation will not turn 0k. If i don't get...

Can Anyone Tell What Year 360 I Have? The Numbers On The Block Are 006830-360-10 Also There Is A Large #6 On The Block. The Numbers On The Heads Are Aawj 360 Toward The Rear And 4077596 Near The Front. Any Help Will Be Appreciated. Thanks Stan

I Need The Plymouth Letters That Go Across The Hood Of My 67 Barracuda. I Also Need A Black Driver Side Interior Panel That Goes Under The Back Side Window. If You Sell Them In Pairs That Is Ok Too. I Also Need One Trunk Trim, I Do Not Need The Center Section And I Think That The Upper And...

Can Anyone Tell Me What Year Or Engine Size This Left Side Exhaust Manifold Is From? I Don't Have A Photo But The # Is 3614395. Thanks Stan

I Read The Discussion About Carb Size For A 360. Most Thought That 750 Was Best. In The Mopar Muscle Mag There Is An Ad For A 408 Sb Crate Motor With A 600 Carb. Why Would They Stroke It To A 408 And Then Use A 600 Carb? Just A Question I Was Wondering About. Stan

I Am Looking For A Intake And 4 Bbl For My 360 In My 67 Fastback. There Is A Edelbrock 3776 On E Bay. Is This A Good Intake Or Should I Try To Find A 7176? Also There Is A Edelbrock 1405-2816 4 Bbl. 600 Cfm. Would This Carb Work? If Not What Carb Do I Need? It Will Be Mostly Stock With A...

Has Anyone Ever Tried To Use A Explorer 8.8 Rear In Their A Body? There Are Lots Of Them In Salvage Yards With Posi Due To The 4500. Buyout. They Are Not Near As Strong As A 8 3/4 But Ford Lovers Think They Are A Good Unit. Maybe There Is No Chance That They Would Fit, Just An Idea. They...

I Am Rebuilding A 360 For My 67 Manual Steering Fastback. The 360 Came Without Intake Or Exhaust Manifolds. If I Can Find 360 Exhaust Manifolds. How Good Are Are They And Will They Fit On My Barracuda? I Know That 360 Magnum Manifolds Are Good But I Was Told They Will Not Fit. 340s Would Be...

I Just Bought A 360 Which I Am Going To Rebuild For My 67 Fastback. It Came Without Intake And Exhaust Manifolds. I Have A Good Running 273 Ho That Came In The Car. Would The Original Manifold And 4 Barrel Carb That Came On The 273 Be Big Enough For The 360. Also What Exhaust Manifolds Should...

I Just Bought A 360. I Was Told It Was A 1971 But Who Knows. Are There Any Numbers To Tell Me Which Heads I Have. It Has A Electronic Distributor But That May From A Later Year.

I Just Bought The 360. The #s On The Block Are 4006830-360-10. There Is Also A Large # 6. Does These Numbers Tell Anything About The Motor. It Did Not Come With Either Intake Or Exhaust Manifolds. Thanks Stan

There Is A 360 Listed As Needs Rebuild IN MY AREA. It Is A 1971 Police Intercepter For $50. Would This Be A Good Motor To Build For My 67 Barracuda? It Have A Good Running Orginial 273 Ho But I Haven't Heard Anyone Talking About Getting Very Much Power Out Of A 273. I Would Like To Be Able...

I Just Bought Some 68 Barracuda Parts 0n Craigslist For $100. One Of The Items Was A Pair Of Front Inter Fender Wheel Shields. They Are In Very Good Shape But Are Made Of Plastic. The Ones On My 67 Are Steel But Are Very Rusted. Did A Bodys Ever Use Plastic Or Are Thay After Market? A Got A...

I Bought My 67 Fb Without A Windshield. I Bought A New Windshield From A Auto Glass Dealer. I Bought A Gasket From Year One. They Said That I Could Not Get A 67 Gasket But A 68 Would Work If I Did Not Use Trim. I Am Going To Have A Glass Co Put It In. Do I Have Everything I Need To Install...