Search results for query: *

In need of an alternator bracket for my 383 and came across one that only has one bolt hole for the alternator pivot. It's stated as fitting the low deck but the ones I always see (stamped steel anyway) have two bolt holes, for both B and RB. Des anybody know or have a bracket that they could...

Hello all. Replacing the exhaust manifold and the "potmetal" fitting to the brake booster disintegrated in the process. Only goes to the booster so I was going to drill/retap for a brass fitting/nipple. Anyone know what the thread size is? Was thinking 3/8" npt but not sure? Any help would be...

Hello all. This is actually for my 1984 Dodge D100. Replacing the 10" clutch and pressure plate and thought about replacing the flywheel also. It looks to be ok, no cracks, hot spots, or grooves, just thought while I was in there, just replace it and keep the original as a spare - maybe...

Getting ready for my engine build and decided on a 470 with TF 240 heads. From what I've found, there doesn't seem to be many options for the valley plate on a B engine with these heads - at least one that doesn't cost $200..... Even the one Trick Flow makes only works with the 270 heads? I...

Hello all - hope everyone is doing well. Looking for a sending unit to control the cooling fans on my big block Dart. I've read that it's best to go with a 2 wire unit if it's going to be mounted in aluminum ( aluminum heads, radiator & water pump housing). I've also seen external sensors...

Slowly acquiring my front end parts for my '73 Dart (Swinger) and was wondering what headers those running the GTS front suspension are using? 400 B engine & TF 240 Heads. Thanks in advance.

Just got around (could finally scrape enough $ together) to install my Wilwood rear disc kit. Bought the Moser housing & axle package (Trutrac, 33 spline) - upon installing the caliper, I notice that without any shims installed, the caliper can't center on the rotor (outboard pad is too tight)...

Can anyone recommend an aluminum "o" ring t-stat housing that works?

Hello all. Looking to get a trans cooler & wanted to know what you guys are using. I've read that the plate style cools better and was considering the B&M Super Cooler. Going with the biggest I can afford - at least 11"x8". I also looked at a Summit Racing branded one and several eBay offerings...

Want to use a Stealth Pro Bandit in my Dart with a 727 & reverse manual valve body but don't know if it'll work. B&M makes the Street Bandit for the 727 and it appears to be the same shifter body - and it works with the reverse valve body....... It costs a good $450 so I thought I might run it...

Gathering parts for my fuel system and wondering what some of you guys are using. Previously ran ss braid but notice there are so many options these days. Cost is always a factor but don't mind the extra expense if the benefits are worth it. Building a 470 going into a '73 Dart Swinger. I have a...

Anybody modify their own oil pan for an external pickup? Trying to save a few bucks since the Milodon pan is around $280. Plan on using a 12AN 90° bulkhead fitting but not sure of the hole diameter, sealing washers to use, or how to cut a "clean" hole. Milodon sells a fitting for this with the...

Hello everyone. I searched in the "Interior" section without much success so I thought I'd try here - since it is more of a "race" type item. I recently installed my subframe connectors and went with a ladder bar and coilovers setup and since the interior was out for welding, (as it came with a...

Been researching to find out who makes the best fitting roll cage but it appears most people don't post any/many pics to help with the decision. I don't have a bender and don't consider it a worthwhile investment so a pre-bent kit is my best option. Anybody use a Jegs 10 pt. kit? From what I've...

Installing my Moser Fab 8.75 & axles and noticed the supplied seals are "no name" and I want to replace with a name brand. They say " Taiwan" and 3200 - nothing cross references. Contacted Moser but not much help, they said they could supply replacements but they would be the same as what I...

Got the ladder bar setup in and now have to figure what coilover spring to "try" first? Getting the Jegs double adjustable ones and need to see if anybody is running them in a big block dart? 10 gallon cell in the trunk, battery relocated - be putting in a 6 or 8 point rollbar setup..... No...

There's not a lot of room so I know the options are limited. Trying to get an idea of rear coilover shock length on a '73 Dart with ladder bars and stock frame. Anybody running a similar set up?

I've been researching subframe connector ideas/designs and have determined the 2"x3" laying "flat" and wrapping the rear frame stub is my best option. I got them cut & notched but noticed the bulge on the driver side trans crossmember where the parking brake cable exits is in the way of the...

Hello to all. Getting ready to order my rear disc brakes and I'm having a bit of trouble understanding the Wilwood install instructions. I'm trying to determine how far outward the brakes will push the wheel. From what I can gather, it appears that the snap ring goes against the rear end housing...

Hello. I recently purchased a Moser fabricated 8.75 and am in the process of installing it in my '73 Dart. I had it made to optimize the wheeler space with a 15x8.3 Weld S71 and 255 60 ET Drag Radials. I got everything mocked up - spring perches @ 42" and u-bolts snugged up, offset shackles, I...

I have a '73 Dart that came with a 7 1/4 rear and want to go with an 8 3/4. Considering a Moser fabricated unit but not sure of the length? I have Centerline Warrior wheels - 8 x 15 w/ 4.5 backspace and Mickey ET Street Radials. With the wheel/tire centered in the wheel well and as square ad I...