Search results for query: *

Does anyone know of a good place to source new steel or fiberglass innerfenders/splash guards? Both the ones in the rear of the fender towards the door and forwards towards the headlights. I have both a '66 Dart and a '66 Coronet in need of them. Thanks for the help

Hi Guys! I have a '66 Coronet that I'm thinking of upgrading the steering and suspension on. It's going to be a street car only but would like it to handle alot better than the clapped out stock parts but still be reasonable to ride in on longer trips. Torque boxes, radiator support and...

Hi guys! First of all I know it’s the wrong forum but I also know it’s the best MoPar forum on the web so I’ll try anyways! My father has just bought a 1952 Chrysler Saratoga with 331 Hemi And since we got a 4-barrel intake manifold with the car but nu carburetor I started wondering if it’s...

First of all, sorry for this! I know this might be the wrong forum for this but you guys are some of the best people on the internet so I thought I might ask anyway. I have this 1992 K3500 Chevrolet pickup that's getting horrible fuel mileage.. Somewhere about 7/7,5mpg. i almost always run...

Hi! I can't seem to find anyone that sells window sweep kits for all four doors to my car including the outside rubber sweeps that I guess should be there, I got a kit but that had felt sweeps inside and out. Could anyone please point me in the right direction? Best regards / Emil

Hi guys! I have a question! I have a 1966 4dr Dodge Dart in serious need of new doorpanels since the ones currently residing in the car is some home-made crap... Does anyone sell new door panels for the '66 4dr? Does the door panels from some other early-a fit? And last, does...

All parts wanted in good but not necessarily mint condition for a 1966 Dart 4dr Door panels, black Headlight bezels Armrests, all four, complete, black Grille Seatcovers front and rear bench, black Instrumentcluster, complete and working

Who sells 'em? With correct length on cables and including fuse box and so on?

Hi! I have an odd problem with my starter, it's a 1.9HP SUMMIT mini starter sitting on a TF A904 and a stroked 318 with no odd firmness when turning it by hand and the teeth on the turbine seems fine, none missing or anything. It's wired with 0 gauge cable directly from a brand new 120A Varta...

Hi! I'm probably going to buy a Alterk setup and a street lynx setup for the '66 Dart 4door I have and just by looking at it it seems like it would free up quite a bit of space for headers. The car has a 318 block and a columnshift 904, so now to the question, are there any headers that will...

Cant't seen to find it anywhere, and does anyone sell new armrests for these cars? :S

Hi! I have myself a '66 Dart and the steering and suspension on the car has seen it's better days so I'm going to do some upgrades, as of now it's completely stock with no sway bars and so on. It's a Smallblock stroker 392", 904 auto and 8.75 rear with KH discs in front and 10" Drums in the...

Hi! Just wondering what the threads are fot the water pipes on the edelbrock intakes, Npt? What sizes?

Anyone know what headers these are? Supposed to fit the early-a http://www.blocket.se/halland/Hedders_forgasare_valiant_dart_mm_34364348.htm?ca=1_9&w=3

Hi! I want to get me some new 15" wheels to replace my stock 14", however I would like to get as wide a tire and wheel as possible without minitubbing, so now to the questions - What's the maximum possible tire diameter - How wide can I go and still keep within the fenders? - What's the...

Hi! I just talked to the tech support over at Dougs and they claim that their 63-66 Early-A non-fenderwell headers will work with a power steering and column-shift car, is this correct?

Hi I'm looking for the innerfenders/splash shields for my '66, that's the parts that supposed to keep water from the door and headlights Contact via thread or pm Best Regards!

I have found a wheel with the following data 15x8" 4,625 backspacing +3mm Offset Will these fit back on my '66 Dart 4-door, 8,75 rear and stock springs and wheelhouses? What size tires to use if they do fit? How big diameter to aim for to keep em from rubbing and how wide? I'd like as...

New, used, no matter... I'll take 'em if you're not crazy on the price Contact via PM and my e-mail : [email protected]

Hi all! I bought a small bolt kelsey hayes brake kit to convrt my 66 dart tp front discs and the kit included stock 67 spindles and ϧcontrol arm and hub but when i mounted the spindle, bearings and hub and tried to put the rotor on the hub i noticed two things, one is that tthe rotor hits...

I lifted the engine out of the '66 Dart today and noticed that almost all the rubber bushings is in quite a bad condition and almost falling to pieces resulting quite some slack in the steering, does anyone offer a complete set of steering bushings for these cars? Who and what to buy?

Need the coupler between the steering gear and steering shaft rether I had it yeasterday. Please sen PM if you have one for sale.

Hi! I've heard and read (on this site among other sources) that the stock rockerarm ratios is quite alot under the 1,5 they're supposed to be, but both mopar performance and sealed power makes stocklooking rockerarms for the small-block chrysler, the question is - are these true 1,5 ratio or...

Hi all! I'm looking at buying some RHS bare heads and want to get ahold of some ok valves at a reasonable price, want 1,625 exh ant 2,02 int valves, found some mopar perf valves but it seems to me that they are quite expensive at around 400 Usd for 16 valves, so my question is if someone has a...

Hi all! I'm looking for a new vacuum advance unit to replace my broken one in my Dart, the engine in the car is a LA318 and it's a mechanical distributor with a single breaker point, what I need to know is what is the partnr for the vacuum advance and where can I find one? Oh, and by the...

Hi all! i have a strange problem in a friends car, it's a '68 Dart with a 318 of unknown origins and a 904, what happens is that when revving the engine high for example when burning tires there suddenly comes a great cloud of smoke from the engine compartment and when one opens the hood the...

Anyone who has a set of eagle 6123CP connecting rods who have weighed the small and big end, I know they're totally around 605g but I really want to know approximate small and big en weight before I order for balancing reasons. Best regards!

Hi! i have a '66 Dart alldoor with drums allround that will soon be upgraded with front discs but I'd really like to get a brake booster to and my question is simply - What's the easiest way? Could I get any old brake booster from the salvage? Best Regards!

Stock mopar 318 rods grinded, sanded, glass shot and shot peened! Matched weight on all rods Balanced Big ends are going through the maschine on monday ARP bolts are ordered Stock stuff works great! Best regards from Sweden and hope you have some beter weather than our -32 degreed...

Hi! I'm looking for a complete set of things that's needed to swap from manual to power steering in my '66 Dart.