Search results for query: *

has anyone used one of these carbs or even heard of these? i see them on e-bay and their prices seem lower then other brands.

well I have after market gauges on my 68 barracuda and never tried to hook up these 2 gauges. amp and fuel gauge work fine. but the temp and oil pressure gauge will give a test light a blinking light when I connect the wire to the test light and the key on. if I leave the test light connected a...

hi folks I have a holley 750 on my magnum 360 that just fouls out the plugs and runs terrible. if I turn the air/fuel mixture screws in all the way it smooths out. I didn't put a vacumm gauge on it to see my readings yet. I don't drive the car much so if its dirty could I just remove the screws...

hi folks does anyone know the manufacture that mopar used for there clutches and pressure plates in 2003? I have a p4529136 clutch and p4529140 plate but I just can not remember the manufacture .I did get them from a Chrysler dealer. thought it was center force. thanks

hi folks well I have had a vibration for years but to narrow it down roughly the vibration Is there under acceleration and stops when I let off the gas pedal. the vibration gets worse the faster I go and it is not in the steering wheel just the body of the car. my rear view mirror in the car is...

hi folks does anyone have pic's of there location of elec. fuel pump and fram HPG1 filter? I have no room to mount these in my 68 barracuda with 2 1/2 exhaust, off set ss leaf springs. I wanted to mount them close to the tank but rear end is also an issue

does anyone know the wiring for a 5 wire relay? wire colors are black, red, white, yellow and blue. I currently just use a ground and hot wire/fuse for the pump. seems like I have seen one here but cannot locate it now. terry

Hi Folks I have a PST G-Max 1-1/8 front sway bar with about 3000 miles on. I had it mounted to the lower shock bolts and to the k frame. nothing wrong with it I just preferred not have one on the car. you can see the exact item on there web sight part number sway150. fits 67-72 a bodies.in very...

Hi Folks I have a brand new Mallory 3-port competition fuel pressure regulator return style. comes with hardware/bracket and instructions. this is a spare and I have no use for it. $ 90.00 shipped to north 48 states only. Thanks

sorry folks my prior post should have been listed with snubber adjustment

well after years of wondering why my car would not leave the rubber marks on the street when I would do a burnout I always thought it was my ss springs that are for a 64-65 b body 3400 lb. but finally after looking at the pinion snubber it was about 3/8 " from the floor board. so once I remover...

hi folks I have a oil or trans cooler for sale. it is a setrab brand #50-660-7612 and is brand new still in the box. bought it from a friend for my automatic but have decided to go with a 4 speed. i will get pic's up this weekend i am out of town until sunday. if you google it or e-bay the model...

so I have a 360/380 crate motor with msd distributor and 6al box I notice that around 2000 rpm the motor miss/surge and if I bring the rpm up in third gear then let off I will get a backfire out of the exhaust. timing to advanced or retarded ? it start very good and does not diesel at all.

ANYONE EVER USE THESE IN THERE SMALLBLOCK? I THOUGHT I WOULD TRY A SET IN MY 360/380 MAGNUM CRATE. SEEMS LIKE AUTOLITE WORKS WELL FOR ME BUT TOUGHT I WOULD GIVE THESE A TRY

Hi folks Years ago I sent a pair of sbp ralley rims to Stockton wheel to be converted to a 15 inch by 8 inch wide rim bs is about 4 3/8. I have now noticed that the welds on the back side of the rim is in 4 places every 90 degrees about 5 inches long then there is a spot about the same...

Hi is there a certain lube i should put on the ens of my new cable i am going to install? Graphite maybe ?

Hi folks what type of voltage draw should I see on my volt gauge when I turn on my electric fuel pump? my volt gauge will drop from about 12.5 volts to 11.5 volts. I have change fuel pumps from holley to a Mallory and I have change out the volt gauge for another. same draw. seems like my volt...

i will be changing the oil in my 833 and 8 3/4 limited slip so can I use the lucas 85-140 in both ?

hi folks what may be the way to go on the rear end oil for a 8 3/4 limited slip? there must be something out there that eliminates the use of the special mopar additive to the oil.

I have a serious room problem in my 68 barracuda i have 8 3/4, ss leaf springs moved in 1/2" longer shocks and tti 2 1/2 exhaust to the bumper. once i pulled the rear end out i could see eveything was rubbing each other. so is it a bad idea to reduce the pipe size from 2 1/2 to 2 " from the...

hi folks for years I ran the mopar off set spring kit but seemed to have problems so I have purchased dr. differentials off set kit and really like the front hanger idea of no drilling into the frame for the nut ,BUT I think the rear shackle brackets and bolts are not as strong as the mopar...

Well folks i have looked everywhere for some of these with no luck i need 4 pieces of a 90 degree brass fitting for my hpg-1 fram fuel filter and electric pump. I know it takes a 6 an aluminum fitting but what size is it in a brass fitting? So it's male 6 an with a 3/8 barb for fuel line.

hi folks since my rear end is out of the car here is my thought, mounting the mallory elec. pump and fram HPG-1 filter next to the top half the gas tank and between the upper shock mounting studs. i have a .050 thick ss plate that is 20 inches long by 4 1/2 inches wide. i drilled 2 holes for...

Hi folks i'm looking for a set ( 2 pc) of rear brake line that run from each wheel(drum) to the y block on the housing. Used is fine o.e m or staineless is also fine. Car is a 68 barracuda thanks terry

Hi folks, if i put a 3/8 thick shim between the frame and front leaf spring hanger for tire clearence and the wheel well will i be also loading the rear springs? Good or bad ? Street driven car. Thanks terry

Hi folks i have a used mallery 140 fuel pump and mounting bracket in excellent condition was going to use in a car i have since sold. 125.00 plus ship used fram hpg-1 fuel filter and mounting bracket in excellent shape $30.00 plus shipping edelbrock 4 hole 2 inch carb spacer witn mountng...

hi folks can any body give me some idea or part numbers for a correct shock to use with my ss springs on my 68 barracuda? i do currently have mopar ss shocks on but feel i could use something new. and they are discontinued for the 4 speed application. the closest i find are some monroe gas...

Hi folks I'm looking for someone in southern ca. that can cut off my old perches and weld on the new ones with the correct pinion angle.(blank magic all on its own) . i have the mopar off set shackle kit and mopar s/s springs.The car seems to have had a vibration ever since i welded on the...

hi i'm looking for a complete 383 engine for my 70 duster. would like something that has all the brackets for alt. & pwr steering.would also like it to be a forged crank motor. i'm in southern ca. zip 93021. pm me with pricing and location

Brand new service manual for 1970 model year, covers belvedere,fury,valiant,barracuda and 70 1/2 AAR Cuda $50.00 plus shipping fom zip 93021.sothern ca.usps Flat rate box may be best. pm me with your questions or e-mail and i will get pic's to you.