Search results for query: *

Yesterday i took my car for a spin it ran fine when i parked it .i got back in it later and i wound it up like i normally do once in awhile 6500 maybe close to 7000 going through the gears then i slowed down and noticed my gauges acting all funky .tach bounced all over and speedo to zero.so...

Do you lose the calibration settings if the battery is disconnected

I have a set of gears that I think are 4.88 .they are 44 and 9 teeth and the pinion measures 1.75on the bearing journal 10 spline yoke end .they are Richmond gears . asking 100$ +shipping located in BC

just wondering if 20 /50 is over kill I have a 340 with a high lift solid cam that I wind up as high as 7000 rpm

I have a 1970 dart that I just rewired with ez wire kit I I am going to use a dash mount ign switch for a 68 but its a after market replacement it has a spot on it for a ground wire does it need to be grounded

just looking to see if anyone knows where to get the power steering return fittings .can they be bought new or do I need to find a used one . I bought a rebuilt box and it doesn't come with it

I have a ralley gauge cluster from a 1970 340 dart it has the 150 speedo the speedo did work but the odometer didn't and the odo numbers aren't all lined up and some look faded the fuel and amp gauge still worked but the water and the oil gauge I am not sure because I had a set of mechanical...

I have a single groove crank pulley from 1970 340 used with manual steering asking 25 + shipping also have manual foot washer pump 20 washer bottle 20 used ignition switch was replaced not too long ago so not many starts on it 20 manual steering shaft asking 60 7 blade clutch fan 25 7 blade...

stock fan shroud from 340 dart 1970 cracked but useable has aluminum riveted to keep together and looks ok too. asking 35 + shipping located bc can

stock rad out of 1970 340 dart it looks pretty good one small solder patch in the tank asking 125 + shipping and I don't even know what to estimate shipping at . 38086 is one of the #s on the tank. I also have a shroud that is cracked but repaired and useable. located in bc canada

I have a stock sway bar out of a 340 dart comes with the mounts but no end links. asking 75 +shipping not really sure what it would cost till I package it up but guess about 35 to 50 located bc canada

manual steering box from 70 340 dart worked fine when removed just switching to power asking 125 = shipping .I would guess about 30 in Canada and about 40 to the usa. I also have the coupler and pitman arm if somebody wants it together located in bc canada

is there really a difference between the 5/8 36 and the 5/8 36chrysler couplers or are they just charging more for the mopar stuff has any used the generic ones

anyone run universal ign switch dash style . I am going to try to put in a tilt column but it doesn't have a key so I was thinking of using a universal switch . is there any thing In particular I should look for .I am in the process of full rewire job msd dist plus 6al so no need for the...

just got a new champion cc374 it was packed real well but I think the shipper dropped it on the side where the mount tabs are should I just test it with water for leaks if good just run it . it may need a bit of straightening but im worried if I pull on it I might make things worse

I thought I would share what I found when trying to install a new ps pump with new brackets and was not getting the pulley to line up not sure if its is just me or my set of repro Saginaw ps brackets but they don't fit right .when bolting the front bracket to the pump there is a spot that...

rewiring my car and was wondering if the warning light is just connected to the park brake or does it get wired to the prop valve too. also what does the prop valve switch do .is it to let you know if there is a leak. if so do I even need to wire to the prop valve

I am in the process redoing the wiring harness in my dart and have finally found some of the right .312 female terminals so i don't have to splice to the plugs .i will have some extras if anyone is interested. If there is lots of interest i may order more. Thanks

I am installing an ez harness and see that there are no relays for headlights just a circuit breaker should I be adding my own relays. and are there any other ciruits I should be using relays on I was thinking maybe the msd I may go to electric fuel pump later also . I was thinking of...

just wondering what a safe max rpm is for stock 7 blade clutch fan on a 340 . and is there any real benefit to adding an aluminum rad if the stock one keeps it cool

does any one know what the factory fuel gauge sender ohms range is .thanks

just wondering if auto meter digital gauges are any good .they arent cheap so i was thinking they would be okay but just checking if any one has used them or had any issues with auto meter in general. im looking at the 5 gauge set pn 6500 and the tach has to be bought separate .gonna be about...

i am going to be doing some up grades on my 340 dart soon so i will have the following parts available soon manual steering box with pitman arm torsion bars front swaybar ralley gauges without the front bezel the odo dont work i think and i might be able to sell with a bezel from 68 style with...

has any one used any of the cheaper universal wiring kits from ez wiring ,speedway ,or summit . i see some of these kits for as low as $170. i know they would need some modifying for switchs and ignition or use gm stuff.are they worth it or do i have to spend 6 bills on a painless or ron...

i have a 1970 340 dart that when im driving the ammeter bounces from high to low it seems to happen once i get revved over about 1500 . so far i tried a different alt,ignition switch ,reg,starter.battery. so now im pretty well out of ideas .im redoing a bunch of stuff this winter and hopefully...

i have a 1970 dart that has manual steering . i was thinking about swapping to to power but i see alot of people swapping from power to manual so i was looking to see why. am i wrong for thinking the car would be nicer to drive i dont think i would lose too much power or gain that much weight ...