Search results for query: *

Lots of good advice. I figure I could drop the crank to put it on but if its not necessary that's great I didn't know if not having it could negatively effect oil pressure. BTW the car was in my drive way. But nosy neighbors called in and complained.

When I built my motor I was on a timeline the city kept issuing fines for me working on it which started at 150 and doubled each time. So I rushed the install. Couldn't find a rope seal. Now I must drop pan and install the seal any advice.. Do I have to rove timing chain and cover...

Can you change the bell housing from one to the other

Its actually for a 72 the 66 is my wife's car

Have a slant six .Bad trans found locally a good trans 904 from a 318 can I swap these two or what will be necessary and if j get the trans for $100 is it worth the effort

I spent all my savings on redoing my brakes wheels tires swapping the rear end ( for bbp) and new battery blah blah ah went to drive the car no forward or reverse and now I don't have a vehicle need to get back on the road asap. Have been carpooling to work for a year and a half now . and if I...

Wouldn't happen to be trien to get rid of 904 for the slant? I need a trans desperately just bought tires and then trans died

After finding a good shop i was properly instructed on how to find my new length which went from 54" center to center to 53 1/8 center to center which is only 7/8 shorter

There are many reasons why i didnt go with wilwood or other aftermarket parts.i dont want alumibum calipers that are made for performance or weekend driving.. but anyhow alot of it is opinions and i like a bit of a challenge. So this was my way for me so thanks to all who have made actual...

Ive heard they get shortened 1 3/4" for rear diff swap 7.25 to 8.25 i guess first things firstvfind a cheap local shop

Btw i am a certified welder and if ther is a good diy link i may go that route.

Have a 72 dart swinger went from 7.25 to 8.25 a body rear dont know what to do for driveshaft length difference di i cut it if so how much . Does anyone know of a good place to have this work done in san diego area. Or does anyone have a driveshaft that will fit for sale (cheap)in my area. My...

When i switched to fmj spindles from 9" a body drum spindle my alignment was good befor tires are way toed out and i was wondering is a longer tie rod neccessary to get back into adjustment

Here it is before and after. Yes it was more difficult than a kit. But i like it. Also im not sure if performance calipers are made fir all the dust and debris of daily driving

Ok i will try to get to the partsbstore and get a gasket some fluid and a filter for while i have it open

Was driving about two years ago and reversebwent out ao I parked the car and just now have the money to get back on the road . Buying new wheels and tires already have the wheels did disc brake conversion on the front and have 8.25 rear end from a duster so I could step into some 15s. My bet...

Meant to type in good till 4-20-14

U can see my woman trying to tease her Blaze wasnt havin it

My pet chupacabra Blaze .. j/k shes actually my best behaved dog. Sweet and scary. I have three other dogs but they arent shop dogs

Rock auto recently sent me some uca bushings that were rusted and dry rotten. So I comlained but told them how I was suprized cause I bought all new front brake components from them and everything was good ...so they gave me this code 2014499817879824. Enter in the how did you hear...

I want to convert my car to manual steering and wanted to know how much for all steering components even the drag link and pitman arm dont need the steering wheel or steering box

i need a bolt for the lower ball joint to the spindle i have bolts that came with the donor parts butt they are to short i know its sunday and i'm probly fd for the day. the bolts i have are 5/8 x 2" and they are flush with the back of the ball joint when pushed thru no room for a nut. where can...

For the price I thonk ill go with kyb has anyone here ran koni or qa1 is it worth the price ...I have upgraded. To disc brake spindles and 73 bbj control arms and just want a bit tougher shock than the monroe without breakin the bank so is it confirmed kyb will be more firm

I have been using monroe gas from kragen I got in when they stillvhad a lifetime warranty but it seems as every year and a half to two there will be one blown the seem cheap maybe ill try kyb gas adjustvi had them on my beetle and they seemed ok

Have a 72 dart slant six and have replaced the front shocks about each two years is there a stiffer or slightly oversized shock with correct ends and travel...maybe something like a dakota or other vehicle that just bolts in. Also I am upgrading to 8 1/4" rear and may add a leaf. So also would...

I am doing the same thing except I have an 8 1/4 rear diff from 74 dart and want to put 15x8 with 4.5 bs and 245/60r15 will this work

I could use the trunk lid and tail lights with bezels how much

Thanks for the added info 2darts

I guess my whole problem was that I wasnt sure if the willwood kit would change me from sbp to bbp which really was my main goal

Thanks for the advice I am goin to return two of the 8 inch wheels and mount 15 x 6 up front 15 x 8 on rear