Search results for query: *

i was wondering if i could get a little guidance on a pump gas build. im starting of with my '73 225 block crank and head and i was thinking about going with stock connecting rods with flat top pistons and a cam from oregon cam grinders with 234/228 @ .050”, 262/252 adv, .476”/.479” lift, 108...

so ive had this problem that if i give my 225 /6 quick throttle it stalls and dies. i was looking at it closer today and i saw that when i gave it quick throttle my accelerator pump went down slowly which would cause it to not have enough gas.has this happened to anyone else before? i dont know...

so i was working on my 225 /6 duster and trying to tune the carb but it seems like it's running ri ch no matter what i do. i have the idle adjustment screw out and my idles still a bit high so i was thinking about rejetting it. i think it was off of 273 i think and i think thats why its running...

so in my '73 duster my hazards work but my turn signals don't. can anyone give me some advice on how to fix it or what it may be. they used to work and i didnt mess with the wiring so i dont think thats it.

ok i wanna preface all of this by saying something that everyone should go by, if you dont have anything nice to say dont say it at all, so if you want to harass someone or judge them this isn't the post for you. now i'll go on to my story. on Thursday i was driving on highway 14 east in...

so i put another slant 6 in my duster but i had a 2bbl intake and in the city my milage significantly dropped. any tips to help with city milage? when i take off from a stop it also wants to die when i give it throttle unless im in 1st gear and its over 1k, i'm on the middle accelerator pump...

i got a '79 toyota sr5 and the manual trans is leaking i cant see where its coming from because of how slow it is and it only leaks while driving . here's some pics if anyone can help figure out what it is.

so i picked up a 79 toyota pickup and its got a couple little problems. one of which is that the headlights arent working. but all the other lights are. i checked the fuses and both the headlight fuses aren't blown and when i hooked up my old headlights from my duster that i know for sure work...

looking for a 1004 to t10 adapter to make my dome light led. ebay has some but shipping will take 3 months.

does anyone have a extra faceplate for a kenwood kdc-mp345u? i bought a car at an auction and it didn't have a faceplate.

so im helping my sister with an '95 isuzu rodeo and it had a problem with the clutch slave cylinder not pushing the clutch out all the way and the pedal sat about 1/2 way. so i replaced the slave cylinder and bled it out and now there's no clutch pressure theres a spring in it so its either all...

its lookin like i might be gettin a 90's 300zx n/a kinda soon but i dont really want a sports car so im gonna see about selling it. has anyone dealt with selling these before and i was more interested in would it increase the value enough to turbo it?

where would be the best place to wire some halo led running light to? id prefer if i could splice into a wire in the engine bay , but it wouldnt be too bad to splice into an under dash wire.

so i bought a stereo off of ebay for my daily driver because i wanted to upgrad to a double din android based one. before i got it i went through the reviews and the seller had good reviews and the only bad ones were the same girl 3 times buying some jewelry from china and complaining that it...

has anyone put some exterior door handles from a 70's cuda on a duster? i like how the look compared to the stock ones and how they're not ridiculously expensive like the kendigit designs handles.

so i was looking at making a custom plate for my duster and the large pack of license plate blanks are alot cheaper, so i was wondering if i could get a group together that would want me to make them a custom license plate. i can do some airbrushing and i should be able to cut some custom vinyl...

so ive been looking at getting my '73 duster done in plum crazy when i got all my body work dont. now i saw someone down in california do a full wrap on a new gen charger with detailed pictures, and i saw another company do a matte plum crazy wrap of a duster funny car and that looked great too...

hi so i have always loved the look of some wide tires on the rear end of a car. so i want to modify my '73 duster to be able to take some wide tires. the tires that i want to put on are some 33.5 x 17.5 drag radials. so has anyone on here put tires this wbig on before? and how narrow should my...

hi does anyone have the dimensions/plans to make a adapter plate for the dash speakers? i want to try to make my own

is it possible to take a 360 and change out parts to raise the redline? like could you swap the bearings and water/oil pumps for high flow and performance versions? i know what makes an f1 car be able to rev to the moon but that'd take everything out of a 360.

hey guys so last night i went to the bank and my car had been running good , but then when i came out my honda would start the immediately die. it has a gull tank, a good battery and no ecu or tcu codes. im not sure that it could be, also the windows wouldn't roll up unless the car was started...

hi, im picking up a motorcycle and the guy said when he was riding it in low revs it ran fat but in higher rpm would run dead lean. what is this a sign of? ive never had an rpm based carb problem before.

Hi guys, so I was looking at picking up a '78 honda goldwing gl1000. The only problem I'm running into is that the title is the right year, make, and model but the Vin is off. What I've been told is that this was bought at an estate sale in a pair of 2 '78 honda goldwing gl1000's. Now I'm not...

hi di i kinked one of my cooler lines so i was gonna go and bend up a new line, but i stupidly forgot the line at my friends property. the part on my radiator is 5/16" i that(it dit on my 727). so can anyone help me with what diameter to get and maybe around what length to to get. oh i forgot to...

ho so i was grinding the bolt out of the like air cleaner hold down on my carter bbd and i havent used my angle grinder for fine stuff like this and accidental cut through the thick wire part. is there an aftermarket or diy version of this? or should i just try to fix it?

hi, so a week ago i was on my way to the beach in oregon with my friends and my friend was speeding and got pulled over. the cop smelled weed and asked where it was, so as i've been taught i gave it to him. it was less than 1/4G of weed but after the cop impounded the car 10 miles from the beach...

so on my new /6 the studs that connect the exhaust manifold to the exhaust pipe sheared, what should i do to to not have a major exhaust leak? also i got one of the long bolts that clamp the intake and exhaust manifold together but one came out fine and i dont know what to do with that either...

hi so i got a 904 that im going to put in my /6 duster and im really confused about some gaskets. when i was calling the parts store they said id only have to replace the torque converter seal and another (i think it was the output seal) and when i was looking further i found a front pump seal...

i was wondering if i could use allthread to make some carb studs for my /6 2bbl intake

so i got a new slant 6 for my car when i come to find that my trans is totaled. so if anyone has a extra 904 for a slant six that they dont care about that would help since right i dont have anything close enough to the amount of money to get it rebuilt.