Search results for query: *

Steve, PM me with your information and I will mail it to you.

Al, I put a set of PG front bucket seat covers on the 70 4 speed Purple Swinger Dart I sold in the summer. Had no problems with the installation and fit was nice. Not as good as Legendary for quality, but for the price, they worked great.

I have a friend that has a 1901 Street Demon Carb 625 CFM on a 340 motor. I have a dynode 340 motor making 375 horsepower with a 1805 Edelbrock Thunder Series 650CFM. He built his 340 motor with the same parts I used except he used a 1901 Street Demon 625 CFM carb, and when he had his motor...

you are correct. I just had some left over 1 gauge wire, why not use it.

This is what I did, 1 gauge wire to a cut off switch, from the switch I then ran the wire on the inside across the back seat and then up the drives side (same as the factory did) out the firewall through floor plug to the starter. Next 1 gauge wire from the starter terminal up to the starter...

Pertronix work great!! easy to install, run a direct 12 volt wire and that's it. I run a Igniter III with rev control and a Flamethrower coil on my 340 motor. I believe you will need model 1361A for your slant 6. Good luck.

nice looking jackets, way cool!!!! Wish they were mine!

this is my friends 1970 Duster

Thanks Toolmanmike. yes it is option S83. I have only seen one on a car from Michigan a few years back at a car show. The box sticker said it was ordered in January 1971 from a Detroit Dodge dealer. I thought it was a cool looking steering wheel and I was looking for something different then...

Thanks for the information. I though it was an option you could order. It's going to look good!!

That's the type I want to buy (Rim blow) . It is black in color and will match my interior. I thought it had a adapter can, I was wrong. I talked to him tonight and he said it was one piece steering wheel. I'm traveling to his house Saturday to see it for the first time and hopefully it's coming...

500.00 dollars, I WISH!!!!!!!

That was for a Remanufactured (restored) Rim Blow steering wheel.

I have a chance to buy a NOS Rim Blow Steering wheel still in the box, dated 1971. Included is the adaptor can and the horn. I have a friend that has a lot of Mopar NOS parts from the Seventies. I want to put it on my 1970 340 Dart. How much is this worth? Thanks

The Shakiest Gun in the West (1968 Comedy) Don Knotts cracks me up!

the oil you see on your intake is from the intake bolts, the oil wicks up and lands on your intake. You need to put some Teflon or Permatex sealer on the bolts before you install them. Hope this help you.

I run a Pertronix 3 in a distributor on my rebuilt 340 motor. You only need to make a straight connect to a full 12 volts to make it work, take the ballast and ecu out of the equation. It works great and has the built in rev limiter.

i'm get ready to put my rebuilt 340 motor back in the car. Do I need to put Teflon tape or pipe dope on the threads for the water temperature and oil senders? Thanks

Thanks for everybody answering. Now its time to start the job, I have some great ideas to work with. Thanks again

not to hijack this discussion guys, RAMM. I just rebuilt a 1970 340, 9.5 to 1, roller rockers, springs to match the cam, X heads with hardened exhaust valves, LD 340 intake, 650 thunder series carb,stock HO exhaust manifolds and using a Comp's 268H. What do you think my horsepower and torque...

Thanks for the help guys. Should I add another cable from the motor to the frame for extra grounding?

I had my engine bay painted, looks so nice I want to move my battery to the trunk. Can I just run a positive cable inside my car to my starter and run a cable from the starter to relay and run a ground to the frame of the car? I was thinking of adding a cut off switch near the battery for...

If you hold your hand behind a tailpipe, the exhaust flow feels like a continuous stream, but it's actually a series of pulses, each of which is created every time one cylinder's exhaust valve opens in the firing order. On a typical V8 engine, one cylinder on each bank fires within 90 degrees of...

what is the OEM part numbers for the positive and negative battery cables for a 1970 340 Duster.

this is what we did for our Dart.

Hi, i talked to a fellow Mopar guy, he has a 1971 dart 340. he is running his Mopar electronic ignition with out a ballast. is it safe to not use any ballast with his Mopar ignition system and if he neededs one what ballast should he use?

hi, here is two pictures of 1970 Dusters with chrome rocker moulding and black paint treatment under the moulding.

Looking for a interior hood release assembly for a 71 Duster.

anybody using a 1901 Street Demon Carb 625 CFM on a 340 motor. I have a dynode 340 motor making 375 horsepower with a 1805 Edelbrock Thunder Series 650CFM. I have a friend that built his 340 motor with the same parts I used except he used a 1901 Street Demon 625 CFM carb, and when he had his...

can I attach a extra 10 gauge wire with a 12 gauge Fusible link to the alternator and run it to the positive starter motor bolt. I figures this will take most the electrical load off the bulkhead wire going to the amp gauge. Will this work?