Search results for query: *

Hi, Thanks in advance!! Eric 1973 Dodge Dart Sport 340 with stock brakes and suspension Current setup: 14" Rallye wheels with Cooper Tires Front tires 215/70 R14 Rear tires 235/60 R14 New ESPO stock XHD height 6 leaf springs to be installed at the same time. Will Cragar SS fit? Cragar...

Got mine last week.... it's real nice. Johnny Lightning Club Membership Box with 1971 Dodge Demon GSS

My son in the industry gets to bring a guest. Excited. He went a couple of years ago through school. Next year he is going to take me to SEMA.

Hello, I have a re-pop set and looking to replace the rear taillight bezels that are pitted bad and the previous owner had painted them black. I know the inside trunk plastic cover has to come out. Any tips to avoid scratching the paint or how remove them with less pain? Thanks in advance! Eric

Green conventional antifreeze 50/50 mix in Chicagoland. Can I wait another year or change it before winter storage this year? 360 LA with new radiator and heater core 2 years ago.

Hoping to install a stock style bracket on the front 2 intake bolts on a Air-gap style intake. Am I risking an intake leak by doing this?

Current one is hangs a drip every once and awhile. Engine was built with Summit G3536 oil pan and Melling pick up 72-S2 Summit Racing® Stock Replacement Oil Pans SUM-G3536 Melling Oil Pump Screen Assemblies 72-S2 This drain plug is about 1/2 longer. It is going to work without interfering with...

360 MRL with FBO Ignition system with the recommended coil and the ballast resistor is by-passed. It has about 1,000 miles on it and ran fine 3 weeks ago. Stock distributor. No spark. Fuel is good. Tested coil primary winding 1.0-1.1 ohms and secondary is 9.70 ohms. Not in spec correct...

1973 Mild 360. It is an A/C that has power brakes and a dual connector vacuum reservoir for the heater control that is connected to the v-nipple on the intake manifold. The other connector goes to the power brake booster. I am looking to add a larger reservoir for the power brakes since I am...

Car is parked detached garage with no insulation . 50/50 antifreeze in the car. I checked it with a hydrometer this past fall -35. Should remove the radiator cap or just leave it? This is in Chicago ‘73 Dodge Dart 360

Looking for some advice from some in the field. I originally started at a Community College for Auto Service Technology in 1988, but changed after 2 years and got a BA. I work in IT for 20 years now. We have visited UNOH, UTI at Lisle yesterday and have Triton (Community College which has GM...

Overflow connector on neck preventing the use of the stock original. I don’t want to cut the original from what I can tell before pulling it apart. Anyone have a recommendation of a black universal shroud to work with the stock 7 blade 18” fan?

2 years in the making and my front end is finally drives nice and tight with Moog Problem Solver parts and is noise free without popping nor clunking. Napa Chassis Parts: Passenger side lower ball joint NCP 2601056 failed with less than 500 miles on it. Not sure about their quality anymore... I...

About 600 miles on the engine. Running stock cooling system for 1973 Dodge Dart Sport 340 with what I believe the original radiator 26" with stock shroud and 18" 7-blade fan with thermal fan clutch 13lb cap and has A/C but not working at the moment. System has been flushed once during heater...

Back end starting to sag due to age. 6 leaf springs What vendor/type? Thanks! Looking to raise the back about 1-2" over stock nothing more. Don't want the back end real high. Tires: 14" Rallye Wheels Front: 215/70 R14 Rear: 235/60 R14

I’m looking for an old school look from the mid-seventies. What brand/type? Going to mount on the steering column.

MRLPerformance 360 with Summit Racing G3536 oil pan. I have documentation that it takes 5 quart oil capacity like typical Mopar small blocks. It has a locking engine oil dipstick that looks like from Masta Performance. 5 quarts brings the level to the low mark. Where it was marked full is...

I haven't looked spark plugs in 30 years. This is a 360 9:1 compression, mild cam, 2.02 intake valves, 600 Edelbrock carb with air gap type intake. FBO ignition

500 miles on a mild 360 9:1 compression with stock cooling system and 180 t-stat 50/50 conventional coolant: stock radiator and fan clutch. Only seems to happen when moving low speeds 10-15 mph swings rapidly towards high scale and than just as quick back to normal. It happened the same other...

Edelbrock 1406 carb. Air gap style intake divider is notched about 3/8". Spilt insulator base gasket or 4 hole?

Just like this except "Sport" done in black, put a different font not script and smaller. Does anyone know who can do this or offer this? I need the Dart 340 just like it is.

Stock adapter threads are booger'd up on the end, which makes it hard to thread oil filter on. 360 with dual exhaust with stock manifolds. Just a 3/8" ratchet with extension to remove/replace it with a new one?

vacuum advance is connected to the timed port of the passenger side and full manifold vacuum is capped. Need to connect the purge connection of the canister.

I did not do it, but apparently these are going to be discontinued. It was brand new and EBay has none. I was thinking a little JBWeld and a little touchup of modeling polish aluminum paint. Or someone in the Chicago area that can fix this professionally at a reasonable cost. Not happy to...

The carb is a summit 750vs that lacks the bowl vent. Where does the center connection go? Aftermarket Mopar Peformance air cleaner and does the purge connection just connect to the vacuum advance port on the carb?

New engine is in but some gremlins: MRL 360 Crusier. See Dyno sheet 1973 Dodge Dart Sport 340 - H code Per my engine builder Mike (MRL) Cam specs: 284/228 .480 lift 112* LSA 108* Running stock 340 exhaust manifolds, want the stock look for now. Headers later possibly. There is a slight...

My son and I tearing down the old engine late 1972 340. It had cylinder leakage at 40% on 2 non adjacent cylinders. I don't have a socket yet to turn over the crank. I see rust and pitting on the bores. See pics. Free advertising on the rags ;) Thanks! Eric

Dupli color Engine Chrysler blue does not match my MRL engine. Does anyone know what would match? Thanks! Eric

One challenge there is no mounting hole on the intake on right side to attach to the rear of the A/C compressor. Is there an aftermarket bracket solution or tap intake for the OEM bracket for the passenger side? Thanks! Eric

What do you think based on the pics? Engine and trans colors look goofy. Anyone have experience with this ebay seller? Dodge: Dart Sport "Demon"