Search results for query: *

Bought a new set for my 68 barracuda vert. Only needed the bottom piece. This set includes a bottom piece that was not quite nice enough for my crazy build. Its a little beat up, few dents, etc. The sides and top pieces are Brand New still in plastic from AMD through Classic Ind. Paid like...

I have a set of valve covers and the breather from my stock original 68 plymouth barracuda 318 needs restored. what you see is what you get. 30.00 + shipping

Got a 1967 Barracuda dash bezel, it is the bezel only, not bad shape, not a show car, does have one little crack that I glued together down by the radio. Glove box piece included. 200.00 +shipping I have more pics I can send by text also.

Hello, If you switch to a hyd. cam and hydraulic roller lifters, do you need to switch the rocker arms? Thanks

Hello. My torture continues. Got just about done with my 68 barracuda build. I bought a rebuilt 340 about a year and a half ago on here I primed it. Used high zinc break in oil never revved it up very high. Drove it in total just about 75 or 80 miles. Just drove it to get exhaust done , an...

Got a 69 340 with stock damper with timing mark, and the built in stock little timing mark gauge on the timing cover. It has 10* each side of 0 TDC. Dumb question, is left of TDC Before TDC or is Right of TDC Before? Clockwise retard, Counter Advance correct. Thanks

Discovered new problem. When I drive my newly rebuilt 68 barracuda with a 340, I noticed I have 2 pools of oil on the intake manifold towards the back on both sides. I also have had a little oil on my plugs. Could this just be valve cover gaskets or intake issue? Thanks

Hello, was wondering what you guys running the sniper did with your PCV valve? As of now I have mine just in the valve cover, not hooked up to anything and the sniper seems to be running fine. I have the stock 340 air cleaner, that has the nozzle in back to hook up the pcv valve with a hose. Was...

Drove my barracuda to get exhaust today and in a 8 mile round trip when I pulled in my drive my engine temp was 215. After shutting it off(I have the Sniper EFI) my radiator overflow line drained a bunch of coolant (about a 70 water to 30 collant with wetter mix) I noticed that the coolant on...

Hello butt savers, once again, now I'm looking for the Door Latch Links for a 1968 plymouth barracuda. The link that connects the outside door handle to the latch that opens the door from the outside. I need both. Any one know where to get them. Thanks

Hello butt savers, once again, now I'm looking for the Door Latch Links for a 1968 plymouth barracuda. The link that connects the outside door handle to the latch that opens the door from the outside. I need both. Any one know where to get them. Thanks

Need the driver (LH) door glass for my 68 barracuda convertible Thanks

Got one of the TRW larger notch power steering pumps on my 1968 Plymouth Barracuda. I have a leak where the pump meets the reservoir on the o-ring that goes around it. I'm looking for either just the o-ring or a complete seal kit. Anyone knows where to get this and a part number or anything, Thanks.

I have the CPP drum to front disc conversion kit I got from Classic ind. (their part#MN5004, CPP# A6374CBK-S) I noticed when I got the kit it came with some extra banjo bolts, sizes all seemed a little different. I have installed and when I went to bleed them, it seems I'm getting air around...

Got the basic Sniper for my 68 340, with the OEM style fuel module sending unit/fuel pump from Holley. I have a "Ready to Run" distributor. Hit the key the fuel pump comes on like it should, shuts off after a few seconds, go to start and it won't fire up. sounds like not getting fuel. Check fuel...

Anyone with a Holley Sniper know which throttle cable bracket you used. The standard SRK-4000 is around 40.00 bucks. Used it on my previous car, it was a edie carb. Now have a sniper and the so called "Sniper Bracket" the 40HS is anywhere from 80.00 to 100.00 bucks. Is there that much of a...

Any one used the Lokar knock off throttle cable and kickdown sets. The ones from Summit, jegs, ebay, etc. Any good? Are the Lokar ones any better, the aftermarkets are quite a bit cheaper? Thanks

Hello looking for the jam nut that holds the convertible top or map light switch. It's a thin little nut, does anyone have one or know where you can get one? Thanks Holds the switch to the dash.

I have a 68 plymouth barracuda that was a 318 2 bbl car. I have now installed a 340 and have the Holley sniper EFI. I would REALLY like to keep and use my stock kickdown and throttle cable set up. Have had the LOKAR set up in the past and wasn't a big fan. What and how have some of you guys...

Hello got the stock 340 exhaust HP manifolds on my 68 barracuda looks like 2 1/4 '' What flange and gasket set do these use thanks

Installing Sniper EFI on my 68 barracuda with 340 and Stock 340 manifold. The temp. sensor hole up by the heater hose and thermostat, is very very small. the temp sensor for the sniper is a lot bigger. The manifold has a hole that is plugged that is behind the carb and in front of the...

All right another silly exhaust question. I have the 340 HP manifolds I am using on my 340 Barracuda. It seems as far as head pipes (down pipes), there are way more 2.5 inch selection out there many more. Mine seem to measure inside diameter at 2 1/4. Is there some way to use the 2 1/2 pipes...

Hello, Looking to see if anyone knows of any Reasonable priced Head Pipes for a 68 barracuda with the 340 HP manifolds? Got a great deal on the manifolds, but dropping 500 bucks just for the damn drop pipes erases that deal. Thanks

Went to install my new transmission cooler lines from Inline tube and the line that goes on the driver side of the radiator matched up and installed perfect. Went to put on the passenger side of radiator line and noticed it had female fittings on both ends. My fittings on my radiator and...

Got a new priming rod from summit and I want to prime my 340. Couple questions, when I pull my distributor gear out, do I need to make sure it goes back in any certain way? Also, are they hard to get out? Any little tricks? I was going to just bend some 18 gauge steel into L shapes and pull it...

Completely took apart my 1968 plymouth barracuda convertible. Took out dash and all the cluster and gauges. When it came back from the body shop this was on driver side floor board. Have no clue what it goes to I am guessing something under the dash, possibly something to do with E-brake, i...

Hello, just wondering what wires anyone is running with their HEI dist. set up. I have a 340 and will using the holley sniper efi. Thanks

My manual says the flexplate to torque converter bolts should be torqued at 270 inch lbs. or 23 foot pounds, seems kind of light? 68 318 with 904

Anybody run just the plain old mopar electronic ignition set up (orange box, dist.) and the Fitech efi or any other of the EFI set ups?

Thinking about going to a Holley Sniper EFI on my 68 barracuda with a 340. Just a nice cruiser. I see Mopar makes a ''Ready to run'' distributor. it's 400.00 dollars cheaper than the Holley or MSD ready to run Dist. will probably go with a MSD or even the Holley sniper coil. Anybody done this...