Search results for query: *

Looking for a 1967 Dart Rear Bumper, preferably re-chromed or in very good condition. Let me know what you have. Thanks, Bryan

Picked up an 18 spline A833 with a package deal along with some other Hemi parts that I will be selling off. I don't know much about the trans. It's in decent shape, been sitting on a shelf for a while, surface rust on the shaft. I believe based on the numbers it's a 1966, it does not have a...

I'm planning to order a new cam today and I'm still undecided which I should go with. I have a 383 that is 30 over, rods and mains are 10 over. Pistons are flat tops I don't know much else about them. Stock closed chambered heads with headers, RPM intake, 700 holley and pertronix distributor...

Over the weekend, I built a pushrod length checker & solid lifter from an old pushrod and hyd lifter. I installed my 1.5 crane roller rockers on my stock 383 heads with a .019 steel shim head gasket. I proceeded to check the length by marking the valve tip, adjusting the rocker so 1-2...

I bought a complete 383 which is believed to have come from a 65' Polara. I tore the top end down for inspection and a cam\lifter swap. When I look down inside the lifter valley, I can see the ends of the counter weights on the crank have all been machined. They are flat with machined grooves...

My machinist (family member) made a mistake and messed up my 360 block. I am in dyer need of a replacement. If you have a 360 block within the chicagoland area, please let me know. Since cash is tight to say the least, I am not looking for anything special, just a block which has...

I scooped up a complete 383 which the owner knew nothing about other than it was rebuilt before he got it and ran great when pulled. I since have changed the intake to a performer RPM 383, with a new 750 vacuum sec, 4160 holley. While I had the intake off I checked out the cam and I believe it...

So here is the deal... I was looking for a set of big block motor mounts, Dan (DRP2671) had a pair for a very reasonable price and shipped them immediately. I had the mounts in a couple days. Then he noticed I was also looking for a set of upper control arms. He said he had a pair that...

I am considering doing a DC conversion, if I can get the mounts cheap enough. I am looking for 74-78 Big Block motor mounts. Thanks Bryan

Looking for a set of big ball joint upper control arms. Anyone have a set for sale? Thanks Bryan

I am looking for just a PORTION of a rear valance for a 70-72 Dodge dart.. I have one in pretty good shape but the Drivers corner is smashed. I am hoping to find someone with one that has a good drivers side corner.. The rest can be hammered... I just need a solid/straight drivers side...

I am trying to layout my exhaust system on the cheap.. I have a friend who recently pulled some dynomax mufflers & side exit tips from his mustang. They were free so I am considering using them.. but need some input. I mached the exhaust tip up to see what it would look like. I love the...

I missed the nationals but now I am considering going to MMW. I have never been there. Anyone going??

AN fittings are all new to me so please bare with me. I am trying to route some trans cooling lines to an aluminum radiator I picked up. For the radiator I have, on summit's website it states.. "Cooler bosses fitted with 1/4 NPT fittings" When I look at the radiator they are female...

I am looking for a solid drivers side fender for my 71' dart. Don't mind a little rust or a dent here and there.. but looking for something pretty solid. let me know what you have.. I am in the chicagoland area obviously locally would be ideal. Thanks Bryan

I have a line on a nice 70 dart, that has obviously been sitting for a long time. The guy claims he has had it for like 10 years.. got in in a trade.. and has no title. I asked if he knows who the car is actually titles too, claims he has no idea. Here in illinois we require a title, the car...

I am considering going to the Nats this year, I have never been there and kinda just thought about it now. I have searched for some places to stay.. but most have been full. I am not really sure where are the places to be.. and then if those don't work.. where are the second best places to...

I am looking to buy torq thrusts II, 17x7 with 4" back space for the front of my 67' dart. I am planning to run 215/50/17's. I have measured or tried to.. but not 100% sure if they will work? Anyone have any experiance with this?? If I want more backspace.. they are special orders and cost...

So I decided to go with an 8.8 for under the dart. I picked one up cheap with 3.73 limited slip and discs. Anyway.. I took it to strange engineering this morning to have them shorten the long side axle tube. No problem they say, so I drop it off and just got a call, they say they can't do...

I have been searching and searching but still have some questions. I am considering going with the Mopar 2800# springs No. 863/864 for my 67' original slant 6 (now 383) Dart. This will be a 80% street car. I don't mind if the ride is a little stiff, I do want it to hook, but I really dont...

Well my car fund has diminished for various reasons. Therefore, looks like I won't be buying new leaf springs that I am in desperate need of. So I am now on the hunt for a used set of springs for a 67' dodge dart. Let me know what you have to offer.. I am in the chicagoland area...

I am in need of a BB 727 trans dipstick and tube in good condition if possible. let me know what you have.. Thanks Bryan

Can anyone help me out and tell me what color they believe this to be.. I am guessing its the original factory color, just not sure which one. Not sure who's it is.. came across this at some point in time and saved it down. Thanks Bryan

I have begun to design my dream workshop.. It's 36'x54' with a 10'x12' man cave. So for fun I have put together a 3d fly through of the outside and inside.. It's not complete but you get the idea. Just thought I would share. http://www.youtube.com/watch?v=FNkHiwWYcj4...

ok.. need some help here. I have been researching and reading and getting more and more confused. Here is my situation.. I got my first 383 installed and running.. I would call it running, not great but running. Its a pretty standard 383 not sure of the internals.. maybe a mild cam. All new...

I am looking for an 8 1/4 rear, large bolt, preferably with a suregrip within a couple hundread miles of chicago would be great. Also, I am looking for a 22" radiator for my dart with the bottom outlet straight out on the pass side.. and the top outlet preferably in the center. Looking for a...

Just thought maybe we could all exchange our various online or downloadable car utillies.. For example.. reference material, hp calculators, tire and wheels size calculators, manuals.. etc. I will start it off.. I have been trying to decide on my wheel and tire combo.. this tool has been a...

I have been searching like mad, the more I search the more I confused I get. Here is my situation, I swapped a 383 in place of my /6 in my 67' dart. Everything seemed ok until I installed the TTI headers. It looks like I will have a slight very slight interference with the centerlink and...

I am looking to rebuild my wiring harness in my 67'. The bulkhead connectors are hammered.. otherwise its in good shape. Does anyone sell replacement bulkhead connectors?? Therefore I am looking for bulkheads or original 67' wiring harnesses so I can either swap mine or reconstruct...

Might be looking for a needle in a hay stack... not sure.. Anyway, I am looking for the preformed factory metal fuel line for my 383, that runs from the mechanical fuel pump to a 4 bbl carb. I believe it has male fittings on each end, might have a fuel filter in the middle.. I am not...