Search results for query: *

Searched google but can't find it. Need the size for the 3 screws that hold the filter to the valve body of a 727 with shallow pan. Lost the old screws and installing transmission today.

Does anyone make a bracket to put the alternator on the driver side of a small block. It's going into a 71 race car and would like to run a short wire to the +side starter post. Is it possible to use the factory brackets and turn them around so it work on the driver side?

Dont know if im in right section with this question, but does anyone know what size the front wheel studs are for a 71 Duster with drum brakes? Need to change out the wheel studs and dont know the size.

Has anyone installed a manual rack and pinion into an A-body. I have fab skills and know that it wont be a "bolt-in" But just trying to get ideas how you mounted it. brand, size, u-joint lengths. Adapters. Any info would help and pics would make wonders. Thanks

I have a new 750 cfm supercharger carb and wondering what mods need to be done to make it work on a n/a engine.

Does someone have a like to a how to remove and install lca and torsion bar on a 71 duster?

Looking for a 8.75 center section from someone in the charleston, sc area.

Does anyone have a sound clip of there Mopar running spintech mufflers. Ran them on my dakota and thinking about putting them on my duster with a X pipe.

I have a 360 LA with RHS heads, hyper 10.5-1 pistons, eagle rods, mopar factory strok crank, ARP bolts, and thinking about throwing a turbo on it and wondering how much boost do you think it could handle and still be kinda safe. lol

I have 1 bucket seat that came out of my Dart that I am trying to sell to finish my race car. It is in good condition. There are no rips or tears. Should clean up nice with a good upholstery cleaner. The hinge covers need to be replaced as they are dry rotted. Would like to get $100+shipping obo...

I have a Holley 650 part number 6210-3 that needs to be rebuilt, it's been sitting in my garage for years. Don't know what they go for so im going to say $75+shipping. Also have a Carter AVS that came off my 360. Not sure if it is a 600 or 650. Works great, does not need a rebuild. Im going to...

Who makes them and what is the part number for them for a 8 3/4.

Just pulled my axles out of my 8 3/4 to change out the axles studs to ARP and noticed that my passenger one (i think) the retainer plate is all bent to hell and it looks like my adjuster has been rubbing on the axle flange pretty bad to where it almost looks like it is grinding it down. Is this...

This might belong in the suspension category, but not sure being that its about racing shocks. I just bout a set of comp eng 3way shocks for the front of my duster because thats what was on it and have heard alot of good things about them. What are yall running on the rears with leaf springs? I...

How do you guys like the ZEX solinoids? Have you had any problems with them?

Control arm bushings on my 71 Duster are shot. Looking on summit and I see that there are some with shells for 45 and without shells for 27. Please give me some advice on which I should get. i know the shells are the metal sleeves.

Ive got a 71 duster w a 360 with some work that I am going to be bracket racing. Yesterday I took it out on a back road by my house to try it out being that I just installed the engine saturday. I know I need to do the brakes cause when I hit the brakes it trys to turn right. The brakes also...

71 duster about 3000 pounds Mopar 360 bored .060 over, stock stroke crank, eagle rods stock length, Speed pro 10.5:1 pistons, RHS head, Comp 292 .501 Cam, Edelbrock Victor intake. 2" Carb Spacer w/ Holley 750. Long tube headers(open). 727 just been rebuilt with manual valve body. 8-3/4...

Building a 360 for drag racing and trying to figure out what is a better intake between a M1 and a Torker II. Looking for a good single plane. What are yall's opinion?

Does anyone have a pic of how the motor mounts are suspost to be on a 360. Installing it into a 71 k member.

I need a set of backing plates for a 8-3/4 to work with 11" brakes.

What size are the 2 plugs beside the camshaft at the front of the engine that plugs the oil in the lifter valley?

A buddy of mine was talking to me and said that he was gonna take his RHS LA-X heads and have the pedestals drilled and have studs installed so that he could run a set of Chevy Roller rockers cause he could get them dirt cheap. Is that possible? And if so is it worth it?

Ok to make it short. 73 Dodge Dart sport with 360. I hear about header problems with PS, If i take the power steering out is there any problems? Some headers say they will work up to 72. With a manual steering box, will a 66,68, 72 or whatever work?

I had seen a thread awhile back that was kinda a How to-subframe connectors. It was a very good info thread. Trying to get everything done before I pull the car in the shop.

looking for a flywheel for cheap for my 360. I built an Engine stand where i can crank the engine but dont feel like modding it for the torque converter. Is there anyone that can help me out?

Ok this kills me to even think this but my family means more. Wifes sick and needs surgery and daughter needs teeth fixed, plus all the bills are pileing up. I need to know what yall think this motor is worth. 1983 360 LA Cleaned & Magnafluxed Bored .60 over New freeze plugs 10.5:1 KB Pistons...

How many teeth are on the drive gear for a 727? Im trying to find a speedo gear for the dart but all the calculators im finding you need to know the drive gear teeth.

Im building my 73 dart up for strip with very minimal street. Keeping the front suspention stock. But it is VERY worn out. trying to do this without spending alot. What kits are out there and what do yall recammend?

Im running a 360 with a M1 intake. What does the 1" hose that runs from the water pump to the intake do? Also do I need it? This is a strip car with minimal street.