Search results for query: *

Congratulations

Inbox fixed

Fixed

Any scratches or pitting in the glass? Chrome in good shape?

Thank you and how much you asking for it?

How bad is it? I have a drivers side that really good. I have passenger side one that moves a 1/8"

Looking for a passenger side hood hinge with the rear slot that goes north south. Don't want sloopy pivot. Thanks

It wasn't in there when I checked. This motor had issues when my kid bought it. Just trying to make sure everything is good. Went through all the bearing clearances and everything is good there. I opened up all the oil passages per guitar jones post.

Yep that's the one...looks like I'm good. It's a bit shallower than what some say but it's between the 2 holes right of the oil filter adapter plug with the block flipped upside down on the stand.

Putting my sons 372" together today and no plug was found. I put in a 19/32 plug. Went down 1.750 from cap face. It's between the top hole and lower hole looking through the oil filter holes? The plug bottomed out. Going with its good?

Thanks guys....bunch of really nice cars and so.e great paint jobs.

Would definitely like to see this color on an A body

Nice rides. Let's keep.them coming

Looking at painting my car as it needs some work and looking for colors.

Thank you for the info

Does any body make a stencil kit for a 1970 Dodge Dart rear stripe?

I've been 10.03@133 and 6.33@108 10 years ago at Norwalk Chrysler race. Shifting 6800 traps 7100. Lean on the carb set up. Running E85. Had a valve job done on the heads and lost 2 mph.

I just purchased a glide for my car this year. Went with the 2 piece case bte/reid, 1.80. My converter guy set it up for 5800. 3180 with me 408 ran a best of 6.47@104 5300 was the flash with a 904.

904 727

$600 for everything.....everything you need is there...cable bracket, cable, shifter, air shifter, bracket for that...solenoid, rpm switch, hose, 10oz bottle, bottle bracket and dual gauge regulator.

Magnafuel 300 with built in filter.

I have a b&m pro rachet shifter for sale with air solenoid for sale. Shifter is less then a year old. Have a bottle with dual guage regulator that goes with it plus rpm switch. Cable bracket also. $700 for everything. Will ship on your dime.

Sorry it took.so long but life gets in the way sometimes.... so I did get around to checking one bore today. Number 2 cylinder. And here are the results of how I did it.. if wrong please et me know the way. I did 0 which was down 90 towards the back 180 towards the lifter bores and 270 towards...

.440 lobe...704 with 1.6 rockers

PBR is porting a set of speedmaster heads that will have a .700ish lift roller. What roller spring are you guys running with these heads? Will have HS 1.6 rockers with B3 correction kit. 1.900 installed height work? My eddy's have a 1.860 IIRC.

Absolutely. I'm hoping these heads push my 410" 3150lb Dart into the 6.20s in the 1/8th.

Looking good so far PBR. These should make some good steam with me running a .700 lift roller and being 268ish at 50

Let us know what you find out. Haven't got to sonic checking all the cylinders yet. Try this weekend.

Thanks for the link John...good reading material